Description
Overview of the Dell CK9KC
The CK9KC Dell Uplink Module 10GB Ethernet X 2 is a hardware component designed to improve networking capabilities in specific Dell switch models. In this article, we will explain in detail what the CK9KC Dell Uplink Module 10GB Ethernet X 2 is, its features, and its compatibility with different switch models. The CK9KC Dell Uplink Module 10GB Ethernet X 2 is an expansion module that adds two 10 Gigabit Ethernet (10GbE) ports to compatible Dell switch models. This module is designed to enhance networking capabilities in the data center and is commonly used in applications that require high bandwidth, low latency, and reliable connectivity.
Features of the Dell CK9KC Ethernet X 2
The CK9KC Dell Uplink Module 10GB Ethernet X 2 offers several features that improve network performance and reliability. Some of these features are:
- 10 Gigabit Ethernet Ports: The module adds two 10GbE ports to compatible Dell switch models. These ports offer high-speed connectivity and low latency, making them ideal for applications that require high-bandwidth connectivity.
- SFP+ Transceivers: The module uses Small Form-factor Pluggable (SFP+) transceivers to connect to the switch. These transceivers are hot-swappable, which means they can be replaced without shutting down the switch, making maintenance easier and faster.
- Ethernet Switching: The module supports Ethernet switching, which allows it to forward frames between ports at wire speed. This feature is essential for applications that require low latency and high bandwidth.
- VLAN Support: The module supports Virtual LAN (VLAN) tagging, which allows network administrators to separate network traffic into different virtual networks. This feature is useful for segregating traffic between departments or applications.
- Quality of Service (QoS) Support: The module supports QoS, which allows network administrators to prioritize traffic based on its importance. This feature is useful for ensuring that critical traffic, such as voice or video, is given priority over less critical traffic.
Compatibility with Dell switch models
The CK9KC Dell Uplink Module 10GB Ethernet X 2 is compatible with several Dell switch models. These models are:
- N3024: This is a 24-port Gigabit Ethernet switch that supports up to four 10GbE uplinks.
- N3024F: This is a 24-port Gigabit Ethernet switch that supports up to four 10GbE uplinks and includes stacking capabilities.
- N3024P: This is a 24-port Gigabit Ethernet switch with Power over Ethernet (PoE) support that supports up to four 10GbE uplinks.
- N3048: This is a 48-port Gigabit Ethernet switch that supports up to four 10GbE uplinks.
- N3048P: This is a 48-port Gigabit Ethernet switch with PoE support that supports up to four 10GbE uplinks.
Installation
The installation of the CK9KC Dell Uplink Module 10GB Ethernet X 2 is straightforward. Follow these steps:
- Turn off the switch and unplug it from the power source.
- Locate the expansion slot on the switch and remove the filler panel.
- Insert the module into the expansion slot until it clicks into place.
- Attach the SFP+ transceivers to the module.
- Reconnect the switch to the power source and turn it on.
General Information about the Dell CK9KC
- Manufacturer : Dell
- Model Number or SKU# CK9KC
- Type : Networking
- Product Type: Network Interface Card
- Total Number Of Ports : 2
- Form Factor : Internal
Networking
- Data Link Protocol : 10Gigabit Ethernet
- Network Technology : 10GBE
- Data Transfer Rate : 10 Gbps
Expansion / Connectivity
- Slot Type : RJ-45
- Compatibility : N30xx Series
