Description
Product overview of Dell MG129 PCI-E RAID Controller
The Dell MG129 SAS-SATA 5/IR PCI-E RAID Controller is a device designed to control and manage multiple hard drives in a computer system. It is a hardware component that can be added to a computer to provide better data management and storage capabilities. This RAID controller supports both SAS and SATA interfaces and can be installed in a PCI-E slot.
What is a RAID Controller
A RAID (Redundant Array of Independent Disks) controller is a hardware component that is used to manage multiple hard drives in a computer system. It is responsible for distributing data across multiple drives and providing redundancy in case of a drive failure. RAID controllers come in different types, including hardware and software RAID controllers.
A hardware RAID controller, like the Dell MG129, is a dedicated piece of hardware that is responsible for managing and controlling the data on the hard drives. It provides better performance and reliability than software RAID controllers, which rely on the computer’s CPU to manage the data.
SAS and SATA Interfaces
SAS (Serial Attached SCSI) and SATA (Serial Advanced Technology Attachment) are two different types of interfaces used for connecting hard drives to a computer system. SAS is a newer and faster interface that is commonly used in enterprise-level storage solutions. SATA, on the other hand, is a more common interface used in consumer-level storage solutions.
The Dell MG129 SAS-SATA 5/IR PCI-E RAID Controller supports both SAS and SATA interfaces, which makes it a versatile solution for managing different types of hard drives in a computer system.
PCI-E Slot
The Dell MG129 SAS-SATA 5/IR PCI-E RAID Controller is designed to be installed in a PCI-E slot on a computer’s motherboard. PCI-E (Peripheral Component Interconnect Express) is a high-speed interface used for connecting hardware components to a computer system. It is commonly used for graphics cards, network adapters, and RAID controllers.
Installing the Dell MG129 SAS-SATA 5/IR PCI-E RAID Controller
To install the Dell MG129 SAS-SATA 5/IR PCI-E RAID Controller, follow these steps:
- Turn off the computer and unplug it from the power source.
- Open the computer case and locate an available PCI-E slot.
- Remove the cover from the slot by unscrewing the screw on the bracket.
- Insert the RAID controller into the slot, making sure it is securely in place.
- Screw the bracket onto the slot to secure the RAID controller in place.
- Connect the hard drives to the RAID controller using SAS or SATA cables.
- Close the computer case and plug in the power source.
- Turn on the computer and install the necessary drivers for the RAID controller.
Using the Dell MG129 SAS-SATA 5/IR PCI-E RAID Controller
Once the RAID controller is installed and the drivers are installed, you can start using it to manage your hard drives. The Dell MG129 SAS-SATA 5/IR PCI-E RAID Controller provides several different RAID levels, including RAID 0, RAID 1, RAID 5, RAID 10, and JBOD (Just a Bunch of Disks).
RAID 0 is a striped array that provides improved performance by distributing data across multiple hard drives. However, it does not provide any redundancy, which means that if one drive fails, all data is lost.
RAID 1 is a mirrored array that provides redundancy by storing duplicate copies of the data on two hard drives. If one drive fails, the other drive can be used to recover the data.
RAID 5 is a striped array with parity that provides both performance and redundancy. It distributes data across multiple hard drives and calculates parity information to allow for recovery of data in case of a drive failure.
RAID 10 is a combination
General Information about the Dell MG129
- Manufacturer: Dell
- Part Number or SKU# MG129
- Product Type : Controller
- Product Name : SAS-SATA
Technical Specifications for MG129 SAS-SATA PCI-E
- Device Type : Storage Controller Plug-in Card
- Host Bus : PCI-E
- Interface : SAS
- Data Transfer Rate : 300 MBPS
- Supported Devices : Hard Drive, Disk Array (raid)
- Channel Qty : 2
Expansion / Connectivity
- Interfaces : 2 X SAS ( Internal )
- Compatible Slots : 1 X Pci Express
- Compatibility Information : DELL Poweredge 840
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
