Description
Management and Monitoring Capabilities
The N3MWF Dell Equallogic Type 17 10GBE 4GB PS4110 Controller Module provides a range of management and monitoring capabilities to ensure the efficient and reliable operation of the storage array. Here are some of the key management and monitoring features of this controller module:
- GUI Interface: The N3MWF controller module provides a web-based GUI interface that allows administrators to easily configure and manage the storage array. The interface is intuitive and user-friendly, and provides detailed information on the performance and health of the storage array.
- CLI Interface: The N3MWF controller module also provides a command line interface (CLI) that allows administrators to perform advanced configuration and management tasks. The CLI interface is useful for automating tasks and managing the storage array in bulk.
- SNMP Monitoring: The N3MWF controller module supports Simple Network Management Protocol (SNMP), which allows administrators to monitor the performance and health of the storage array using third-party monitoring tools.
- Event Notifications: The N3MWF controller module can send email notifications to administrators when events occur, such as when a drive fails or when the storage array is running low on disk space. This allows administrators to respond quickly to issues and minimize downtime.
- Performance Monitoring: The N3MWF controller module provides detailed performance metrics, such as IOPS, throughput, and latency, which allow administrators to monitor and optimize the performance of the storage array.
- Firmware Upgrades: The N3MWF controller module can be upgraded remotely using the GUI or CLI interface. This allows administrators to stay up-to-date with the latest firmware and security updates, ensuring the ongoing reliability and security of the storage array.
Installation and Configuration Procedures
Here are the installation and configuration procedures for the N3MWF Dell Equallogic Type 17 10GBE 4GB PS4110 Controller Module:
Installation:
- Ensure that the PS4110 storage array is powered off and unplugged from the power source.
- Remove the top cover of the storage array by unscrewing the thumbscrews located at the back of the array.
- Locate the empty controller slot and remove the filler panel.
- Align the N3MWF controller module with the controller slot and gently push it in until it clicks into place.
- Secure the controller module in place by screwing in the thumbscrews located at the back of the array.
- Replace the top cover of the storage array and screw in the thumbscrews to secure it in place.
- Power on the storage array and wait for it to initialize.
Configuration:
- Connect a network cable from the management port of the N3MWF controller module to a switch or router.
- Open a web browser on a computer connected to the same network and enter the IP address of the management port of the controller module.
- Log in to the controller module using the default username and password (admin/admin).
- Follow the on-screen instructions to configure the network settings, such as the IP address, subnet mask, and gateway.
- Configure the RAID levels and virtual disks according to your requirements.
- Configure the network settings for iSCSI connectivity, such as the initiator IP address, subnet mask, and gateway.
- Configure the access control policies, such as CHAP authentication and IP access restrictions, to secure the storage array.
- Configure the alerts and notifications to receive notifications in case of any issues or failures.
- Save the configuration and reboot the storage array.
Compatibility with Dell Equallogic PS4110 Storage Array
The N3MWF Dell Equallogic Type 17 10GBE 4GB PS4110 controller module is compatible with Dell Equallogic PS4110 storage arrays. It is specifically designed for these storage arrays and is not compatible with other models or brands.
Additionally, the N3MWF controller module requires firmware version 8.0 or later to function properly with the PS4110 storage array. Therefore, it is important to ensure that the firmware on the storage array is up-to-date before installing the N3MWF controller module.
It is also important to note that the N3MWF controller module is a 10 Gigabit Ethernet (10GbE) controller, and it requires a 10GbE network infrastructure to operate at its full potential. If the network infrastructure does not support 10GbE, the performance of the controller module will be limited by the network speed.
General Information
- Manufacturer: Dell
- MPN: N3MWF
- Type: Controller
- Controller Type: Controller Module
Technical Specifications
- Network Interface: 2 x 10GbE SFP+ ports per controller
- Cache Memory: 4GB per controller
- RAID Support: RAID 5, 6, 10, 50
- Maximum Capacity: Up to 36TB per PS4110 array with 12 x 3TB NL-SAS 7.2k RPM drives
- Maximum Hosts: Up to 512 per pool or 1024 per group
- Power Supply: Dual 580W hot-pluggable power supplies
- Form Factor: Rack-mountable 2U enclosure
