Description
Introduction to the P4007 Dell ATI Radeon X300 Graphics Card
The P4007 Dell ATI Radeon X300 Graphics Card is a type of graphics card that was designed for use in desktop computers. It is an older model that was released in the mid-2000s, but it was widely used at the time and can still be found in some systems today.
The graphics card is designed to be used with a PCI Express x16 slot on a motherboard and it comes with 128 MB of DDR SDRAM memory. It also features dual DVI and DMS 59 connectors, which allows you to connect two monitors at once.
One of the key features of the P4007 Dell ATI Radeon X300 Graphics Card is its low profile design. This makes it a great choice for use in slimline desktop computers or small form factor systems, where space is limited.
The graphics card is powered by the ATI Radeon X300 GPU, which provides reliable performance for basic computing tasks, as well as some light gaming and multimedia applications. It is not designed for high-end gaming or professional graphics work, but it can still provide decent graphics performance for general use.
Technical Specifications
Sure! Here are some technical specifications for the P4007 Dell ATI Radeon X300 Graphics Card:
- GPU: ATI Radeon X300
- Memory: 128 MB DDR SDRAM
- Memory Interface: 128-bit
- Core Clock: 325 MHz
- Memory Clock: 400 MHz
- Bus Type: PCI Express x16
- Connectors: Dual DVI, DMS 59
- Max Resolution: 2048 x 1536
- DirectX Support: 9.0b
- OpenGL Support: 2.0
- Cooling: Passive
- Form Factor: Low Profile
The P4007 Dell ATI Radeon X300 Graphics Card is based on the ATI Radeon X300 GPU, which was first released in 2004. The card comes with 128 MB of DDR SDRAM memory, which provides enough memory for basic computing tasks and light gaming.
The memory interface of the card is 128-bit, which is wider than the standard 64-bit interface found in some budget graphics cards. This allows for better memory bandwidth, which can improve the performance of the card.
The core clock of the P4007 Dell ATI Radeon X300 Graphics Card is 325 MHz, while the memory clock is 400 MHz. These clock speeds are modest by today’s standards, but were typical for graphics cards of this era.
The card is designed to be used with a PCI Express x16 slot on a motherboard. It comes with dual DVI and DMS 59 connectors, which allow you to connect two monitors at once.
The P4007 Dell ATI Radeon X300 Graphics Card supports a maximum resolution of 2048 x 1536, which is adequate for most desktop computing tasks. It also supports DirectX 9.0b and OpenGL 2.0, which are common graphics APIs used by many software applications.
The cooling on the P4007 Dell ATI Radeon X300 Graphics Card is passive, which means that it doesn’t require a fan to cool the GPU. This can be an advantage for those who want a quiet desktop computer.
Installation Guide
Sure! Here’s a step-by-step guide for installing the P4007 Dell ATI Radeon X300 Graphics Card:
- Before you start, ensure that your computer is turned off and unplugged from the power source. Also, make sure to ground yourself by touching a metal object before handling the graphics card to prevent static damage.
- Locate the PCI Express x16 slot on your motherboard. It’s usually a long, black slot located near the center of the motherboard. If your computer already has a graphics card installed, remove it by unscrewing the bracket at the back of the card and gently pulling it out of the slot.
- Line up the P4007 Dell ATI Radeon X300 Graphics Card with the PCI Express x16 slot on the motherboard. Ensure that the card is oriented correctly and that the DVI or DMS 59 connectors face the back of the computer.
- Insert the card into the slot, making sure that it is firmly seated. Push down on the card until the retention mechanism clicks into place.
- Secure the graphics card to the case by screwing in the bracket at the back of the card. This will ensure that the card is properly secured and won’t come loose.
- Connect your monitor to the graphics card using either the DVI or DMS 59 connector, depending on which type of cable your monitor uses.
- Reassemble your computer and connect it to the power source.
- Power on your computer and wait for it to boot up. If the card is installed correctly, your computer should automatically detect it and install the necessary drivers. If not, you may need to install the drivers manually from the manufacturer’s website.
- Once the drivers are installed, you can configure the display settings in your operating system to take advantage of the dual monitor support and other features of the graphics card.
Product Details:
- Manufacturer: Dell
- Manufacturer Part Number: P4007
- Manufacturer Type: Video Cards
- Manufacture Sub-Type: Radeon
- Product Name: 128MB
- Manufacturer Dell Systems, Inc
- Product Model: P4007
Key Features:
- Type: Graphics Card
- Card Interface: Pci-E X16
- Compatibility: PC
Processor:
- Graphic Processor: ATI Radeon X300
- Gpu Clock Speed: 200 MHZ
- Ramdac Speed: 400 MHZ
Memory / Technology:
- Installed Memory: 128 MB
- Memory Tech: DDR SDRAM
- Memory Data Width: 64-Bit
Technical Features:
- Form Factor: Plug-In Card
- Max Screen Resolution: 2048 X 1536
System Requirements:
- Operating System: Microsoft Windows 2000, Microsoft Windows 98, Microsoft Windows Millennium Edition, Microsoft Windows Xp, Microsoft Windows Nt 4.0 Or Later
Input / Output:
- Interfaces: 2 X DVI-I – 29 Pin Combined Dvi 2 X Vga – 15 Pin Hd D-Sub (Hd-15)
- Compatible Slots: 1 X PCI Express X16
