Description
Introduction to R3M1C Dell 16GB 1333mhz Pc3-10600 Cl9
R3M1C Dell 16GB 1333mhz Pc3-10600 Cl9 Ecc Registered DDR3 SDRAM 240-Pin RAM is a type of RAM that is designed for use in Dell servers and workstations. RAM stands for Random Access Memory and it is a critical component of any computer system.
The R3M1C Dell 16GB RAM is designed to be high-speed and high-capacity, with a clock speed of 1333mhz and a total capacity of 16GB. It is built using DDR3 SDRAM (Double Data Rate 3 Synchronous Dynamic Random Access Memory) technology, which is a type of RAM that is commonly used in servers and high-performance computers.
One of the key features of the R3M1C Dell 16GB RAM is that it is ECC (Error Correction Code) registered. This means that it includes additional circuitry to detect and correct errors that can occur during data transmission. ECC RAM is particularly important in servers and workstations where data integrity is critical, as it helps to prevent data corruption and other issues that can lead to system crashes or data loss.
The R3M1C Dell 16GB RAM also features CL9 timing, which refers to the latency or delay between a memory request and the actual data transfer. CL9 is a relatively low latency, which means that the RAM can respond quickly to memory requests and help to improve overall system performance.
Understanding DDR3 SDRAM and its advantages
DDR3 SDRAM (Double Data Rate Type Three Synchronous Dynamic Random Access Memory) is a type of computer memory that has been widely used in computer systems from around 2007 until around 2016 when DDR4 SDRAM became more popular. DDR3 SDRAM is still used in some older systems, and it is important to understand its advantages and limitations.
DDR3 SDRAM offers several advantages over its predecessor, DDR2 SDRAM. One of the most significant advantages is its higher data transfer rates. DDR3 SDRAM can transfer data at a higher rate than DDR2 SDRAM because it uses a higher clock frequency and transfers data on both the rising and falling edges of the clock signal. The data transfer rate of DDR3 SDRAM is typically measured in megatransfers per second (MT/s), and the maximum transfer rate for DDR3 SDRAM is 2133 MT/s.
Another advantage of DDR3 SDRAM is its lower power consumption. DDR3 SDRAM operates at a lower voltage than DDR2 SDRAM, which means that it uses less power. This makes it more energy-efficient and can help to extend the battery life of laptops and other portable devices.
DDR3 SDRAM also supports higher memory capacities than DDR2 SDRAM. DDR3 SDRAM can support up to 16 GB of memory per module, compared to a maximum of 8 GB per module for DDR2 SDRAM. This makes DDR3 SDRAM better suited for memory-intensive applications such as video editing, 3D modeling, and scientific simulations.
Finally, DDR3 SDRAM offers better performance than DDR2 SDRAM in terms of latency. Latency is the time it takes for the memory to respond to a request for data, and lower latency is generally better. DDR3 SDRAM has lower latency than DDR2 SDRAM, which means that it can access data faster and improve the overall performance of the system.
Technical specifications
The R3M1C Dell 16GB 1333mhz PC3-10600 CL9 ECC Registered DDR3 SDRAM 240-Pin RAM is a high-performance memory module that is specifically designed for use in Dell servers and workstations. Here are the technical specifications of this RAM module:
- Capacity: 16GB
- Memory Type: DDR3 SDRAM
- Memory Speed: 1333MHz (PC3-10600)
- CAS Latency: 9
- Voltage: 1.35V
- Error Correction: ECC Registered
- Pin Count: 240-Pin
- Form Factor: DIMM (Dual In-Line Memory Module)
- Rank: Dual Rank
Let’s take a closer look at some of these specifications:
- Capacity: The capacity of the R3M1C Dell 16GB RAM module is 16GB. This means that it can store up to 16 gigabytes of data at any given time, which is a large amount of memory.
- Memory Speed: The memory speed of this RAM module is 1333MHz, which is also known as PC3-10600. This refers to the maximum transfer rate of the RAM, measured in megabytes per second (MB/s).
- CAS Latency: The CAS latency of this RAM module is 9. CAS latency, or Column Address Strobe latency, is a measure of the time it takes for the memory module to respond to a request for data. Lower CAS latency indicates faster performance.
- Voltage: The voltage of this RAM module is 1.35V. This is a low voltage level that helps to reduce power consumption and heat generation, which can be important in server environments.
- Error Correction: The R3M1C Dell 16GB RAM module is ECC Registered, which means that it has built-in error-correction capabilities. This helps to ensure data integrity and system stability, which is particularly important in server environments where data accuracy is critical.
- Pin Count and Form Factor: This RAM module has 240 pins and uses the DIMM form factor, which is a standard form factor for server memory modules.
- Rank: This RAM module is Dual Rank, which means that it has two sets of memory chips that can be accessed independently. This can improve performance in certain applications.
General Information
- Manufacturer: Dell
- Manufacturer Part Number: R3M1C
- Type: Memory (RAM)
- Sub-Type: Pc3-10600
- Product Name: 16GB DDR3 SDRAM Memory Module
Technical Information
- Storage Capacity: 16GB
- Memory Technology: DDR3 SDRAM
- Number Of Modules: 1 X 16GB
- Memory Speed:1333mhz DDR3-1333/PC3-10600
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Ram Features: Dual Rank, Low Voltage
Physical Characteristics:
- Form Factor: 240-Pin Dimm
CompatibilityDell Poweredge C2100, C6105, C6145, C6220, C8220, C8220x, M420, M520, M610, M610x, M620, M710, M710hd, M820, M915, R320, R410, R415, R420, R510, R515, R520, R610, R620, R710, R715, R720, R720xd, R820, R910, T320, T410, T420, T610, T620, T710 Dell Precision Fixed Workstation R5500, T3600, T3600 Base, T3600 Essential, T5600, T5600 Advanced, T5600 Base, T5600 Essential, T7600, T7600 Advanced, T7600 Base, T7600 Essential