Description
Smart Memory Functionality and Benefits
Smart Memory is a feature that allows for advanced error correction and memory performance optimization in DDR4 memory modules. The Dell 32GB 2400MHz PC4-19200 ECC Reg DDR4 SDRAM 288-Pin RAM (part number SNP7FKKKC/32G) is a type of RAM that utilizes this feature.
The benefits of Smart Memory include improved reliability and stability by detecting and correcting single bit errors, improved data integrity by detecting and preventing multi-bit errors, and improved memory performance by optimizing the memory controller’s communication with the memory modules. Additionally, ECC (Error Correction Code) memory can detect and correct errors in data that is stored in RAM to ensure that the data is accurate and consistent. This can be particularly important in servers and other mission-critical applications where data accuracy is crucial.
The Dell SNP7FKKKC/32G is a 32 GB (gigabyte) memory module that operates at a speed of 2400 MHz (megahertz) and uses PC4-19200 memory standard. The 288-pin DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random-Access Memory) is the latest generation of memory technology that provides faster speeds, higher density and improved power efficiency compared to its previous version DDR3.
Pin Configuration and Form Factor
The “Pin Configuration” refers to the layout of the pins (the small metal connectors on the bottom of the memory module) and how they connect to the memory slot on a computer’s motherboard. In the case of the Dell 32GB 2400mhz Pc4-19200 Ecc Reg DDR4 SDRAM 288-Pin Ram, the memory module has 288 pins and it is a DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random Access Memory) module.
The “Form Factor” refers to the physical dimensions and layout of the memory module. The Dell 32GB 2400mhz Pc4-19200 Ecc Reg DDR4 SDRAM 288-Pin Ram is a 288-pin DIMM (Dual In-line Memory Module), which is a type of memory module that is commonly used in desktop computers.
The “Ecc Reg” in the product name means that it is a ECC (Error Correction Code) memory module, which is a type of memory that includes additional data to detect and correct errors that may occur during data transfer. It is mainly used in servers and workstations, where data integrity is crucial.
Installation and Setup Instructions
The installation and setup instructions for the Dell 32GB 2400mhz Pc4-19200 Ecc Reg DDR4 SDRAM 288-Pin Ram would vary depending on the specific computer or system that it is being installed in. However, in general, the process would involve the following steps:
- Turn off the computer and unplug it from the power source.
- Open the computer’s case to access the memory slots.
- Carefully remove any existing memory modules from the memory slots, if necessary.
- Locate the memory slots on the motherboard and ensure that the new memory module is compatible with the slot.
- Align the new memory module with the memory slot and gently press down on the module until it clicks into place.
- Close the computer’s case and plug it back in to the power source.
- Turn on the computer and enter the BIOS or UEFI settings to verify that the new memory module is recognized and that the correct amount of memory is displayed.
- Exit the BIOS or UEFI settings and boot into the operating system.
It is important to follow the correct installation and setup procedures to avoid damaging the memory module or the motherboard. If you are unsure about the process, it is recommended to consult the computer’s manual or contact the manufacturer for assistance.
General Information
- Manufacturer: Dell
- Manufacturer Part Number: SNP7FKKKC/32G
- Type: Memory (RAM)
- Sub-Type: PC4-19200
- Product Name: 32GB DDR4 SDRAM Memory Module
Technical Information
- Storage Capacity: 32GB
- Memory Technology: DDR4 SDRAM
- Number of Modules: 1 X 32GB
- Bus Speed: 2400MHZ DDR4-2400/PC4-19200
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: CL17
- Features: 2RX4
