Description
ECC Registered RAM
ECC (Error-Correcting Code) Registered RAM is a type of memory that is commonly used in servers and other high-performance computing systems. It is designed to detect and correct errors that may occur during data transmission between the RAM and the CPU. ECC Registered RAM is also sometimes referred to as “buffered” memory, because it includes an additional buffer chip that sits between the memory controller and the RAM modules.
The purpose of the buffer chip is to improve the stability and reliability of the memory system by reducing the electrical load on the memory controller. This is achieved by limiting the number of memory modules that can be connected to each memory channel. When a large number of memory modules are connected to a single memory channel, it can lead to signal degradation and other electrical issues that can cause data errors.
The buffer chip in ECC Registered RAM helps to prevent these issues by acting as a sort of “middleman” between the memory controller and the RAM modules. It receives and buffers the data signals that are sent from the memory controller, and then forwards them on to the RAM modules. This helps to reduce the electrical load on the memory controller, which can improve system stability and reduce the likelihood of data errors.
In addition to the buffer chip, ECC Registered RAM also includes an additional layer of error detection and correction logic. This allows the RAM to detect and correct certain types of errors that may occur during data transmission. For example, if a bit of data is flipped during transmission, the ECC logic can detect this and correct it before it is stored in memory. This can help to improve the reliability and accuracy of data storage and processing in high-performance computing systems.
2933 MHz Memory Speed
The memory speed of a RAM module refers to the rate at which it can transfer data to and from the computer’s CPU. 2933 MHz memory speed means that the RAM module can transfer data at a rate of 2933 million cycles per second.
In practical terms, a higher memory speed translates to faster data access and processing times, which can improve overall system performance. The speed of a RAM module is measured in MHz (megahertz) and is usually listed on the RAM module itself or in the computer’s documentation.
It’s important to note that the memory speed of a RAM module must be compatible with the motherboard and CPU of the computer system it’s being installed in. If the memory speed of the RAM module is higher than what the motherboard or CPU supports, it may not operate properly or at all.
The 2933 MHz memory speed is a relatively high speed and is commonly used in high-performance computing systems such as gaming PCs, workstations, and servers. However, it’s important to ensure that the other components of the system, such as the CPU and motherboard, are also compatible with this memory speed to avoid any compatibility issues.
288-Pin RAM Connector
The 288-Pin RAM Connector is a physical interface that allows a RAM module to be connected to a computer’s motherboard. The number “288” refers to the total number of pins on the connector, which are arranged in a specific pattern to ensure proper alignment and connection with the motherboard.
The 288-pin RAM connector is designed specifically for DDR4 SDRAM (Synchronous Dynamic Random Access Memory) modules, which are commonly used in modern computer systems. The connector is compatible with a wide range of DDR4 SDRAM modules, including both standard and ECC (Error-Correcting Code) registered RAM.
When a RAM module is inserted into the 288-pin connector on the motherboard, the pins on the module align with the pins on the connector to establish a physical and electrical connection between the RAM and the rest of the system. The connector ensures that the RAM module is properly seated and aligned, which helps to prevent any damage to the module or the motherboard.
In addition to the physical connection, the 288-pin RAM connector also supports the transmission of data between the RAM module and the CPU. The pins on the connector are arranged in a specific pattern to ensure that data is transmitted accurately and quickly, which helps to improve overall system performance.
General Information
- Manufacturer: Dell
- Manufacturer Part Number: SNP8WKDYC/32G
- Type: Memory (RAM)
- Sub-Type: PC4-23400
- Product Name: 32GB 2RX4 DDR4 Rdimm 2933mhz
Technical Information
- Storage Capacity: 32GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 32GB
- Bus Speed: 2933mhz DDR4-23400/PC4-2933v
- Data Integrity Check: ECC
- Signal Processing: Registered
- Cas Latency Timings: Cl21
- Rank Features: 2rx4
Compatibility
- Poweredge R640
- Poweredge R740
- Poweredge R940
- Poweredge R740xd
- Poweredge C6420
- Precision Workstation 7820 Tower
- Precision Workstation T7820xl Tower
- Poweredge T640
- Poweredge Fc640
- Poweredge M640
- Poweredge M640 Vrtx
- Precision Workstation R7920 Xl
- Precision Workstation R7920
- Precision Workstation T7920xl Tower
- Precision Workstation 7920 Tower
- Poweredge C4140
- Poweredge R840
- Poweredge Mx740c
- Poweredge Mx840c
