Description
Product Overview
Product Overview of SNPMMRR9C/32G is a summary of the key features and characteristics of the memory module. This Dell 32GB memory module is designed to upgrade or replace the existing memory in a computer system to improve performance. It has a capacity of 32GB and operates at a speed of 2133MHz. The memory module uses PC4-17000 DDR4 SDRAM technology and has a latency of CL15. It is a quad-rank ECC registered DIMM, ensuring data integrity and error correction capabilities. This memory module is genuine and designed for compatibility with specific Dell systems.
Error Correction and Data Integrity
Error Correction and Data Integrity refers to the mechanisms used to ensure that data is transmitted and stored correctly in a computer system. The SNPMMRR9C/32G Dell 32GB memory module features Error Correction Code (ECC) technology, which provides a high level of protection against data corruption. This ECC technology detects and corrects single-bit errors in real-time, ensuring that data is transmitted and stored accurately. The quad-rank configuration and ECC registered design of this memory module further enhance data integrity and reliability. With these features, the SNPMMRR9C/32G memory module is ideal for use in mission-critical applications and environments where data accuracy is essential.
Installation and Setup Instructions
The Installation and Setup Instructions for the SNPMMRR9C/32G Dell 32GB memory module typically involve the following steps:
- Turn off the computer and unplug it from the electrical outlet.
- Open the computer case to access the memory slots.
- Determine the number of memory slots available and the type of memory required for your system.
- Ground yourself to discharge any static electricity from your body.
- Release any locking tabs on the memory slots and insert the SNPMMRR9C/32G memory module into the appropriate slot.
- Press down on the module until the locking tabs secure it in place.
- Close the computer case and reconnect the power cable.
- Turn on the computer and boot into the operating system.
- Check the system properties or memory diagnostic tool to verify the amount of memory installed.
It is important to consult the computer manual or manufacturer’s website for specific instructions and requirements for your system before installing memory. Also, it is recommended to handle memory modules carefully to avoid damage to the module or computer components.
General information
- Manufacturer: Dell
- Manufacturer part number: SNPMMRR9C/32G
- Type: Memory (RAM)
- Sub-Type: Pc4-17000
- Product name: 32gb ddr3 sdram memory module
Technical Information
- Storage capacity: 32gb
- Memory technology: ddr4 sdram
- Number of modules: 1 x 32gb
- Bus speed: 2133mhz ddr3-2133/pc3-17000
- Data integrity check: ecc
- Signal processing: load reduced
- Cas latency timings: cl15
- Features: quad rank
- Voltage: 1.2v
