Description
Memory Capacity and Frequency
Memory Capacity refers to the amount of memory (in GB or MB) that the RAM module can store. The more memory capacity a module has, the more data it can store and retrieve, which can improve the performance of a computer.
Frequency, also known as clock speed, refers to the rate at which the memory module accesses data. It is measured in MHz (Megahertz) and determines how quickly the data can be transferred from the memory module to the processor. A higher frequency means that the memory can access data faster, which can improve the overall performance of a computer.
In the case of the WPPYK Dell 64GB 2400mhz Pc4-19200 Ecc Registered DDR4 SDRAM 288-Pin Ram, the memory capacity is 64GB and the frequency is 2400MHz.
Installation and Configuration Guide
An Installation and Configuration Guide is a step-by-step instruction manual that helps users install and set up a particular device or product. In the case of the WPPYK Dell 64GB 2400mhz Pc4-19200 Ecc Registered DDR4 SDRAM 288-Pin Ram, the guide would cover the steps to install the memory module into a compatible Dell system and configure the system’s BIOS settings to ensure optimal performance.
The guide might include the following steps:
- Ensure compatibility with the system: Check the system’s manual or specifications to confirm that it supports the memory module’s specifications.
- Prepare the system: Turn off the system, unplug it, and remove any peripherals connected to it.
- Locate the memory slots: Look for the memory slots inside the system, usually found near the processor.
- Install the memory module: Line up the notches on the module with the slots, press down on the module to secure it in place, and close the tabs on either side of the slot.
- Configure the BIOS settings: Boot the system, enter the BIOS settings, and configure the memory settings, such as frequency and voltage.
- Save and exit the BIOS: Save the changes and exit the BIOS, then boot the system into the operating system to verify the installation.
It is recommended to follow the manufacturer’s instructions and guidelines to ensure a successful installation and configuration process.
Power Consumption
Power consumption refers to the amount of electrical power that a device or component uses during operation. In the case of the WPPYK Dell 64GB 2400mhz Pc4-19200 Ecc Registered DDR4 SDRAM 288-Pin Ram, the power consumption would be the amount of electrical power used by the memory module while it is operating in a computer system.
The power consumption of a memory module is typically measured in watts (W) and is affected by factors such as memory capacity, frequency, and the number of memory modules used in a system. DDR4 memory, in general, consumes less power compared to earlier DDR memory standards, which helps reduce the overall power consumption of a system and improve energy efficiency.
It is important to consider the power consumption of a memory module when selecting it for a computer system, especially for systems that require low power consumption, such as portable or battery-powered devices. The power consumption information for the WPPYK Dell 64GB 2400mhz Pc4-19200 Ecc Registered DDR4 SDRAM 288-Pin Ram is typically available from the manufacturer’s specifications or datasheet.
General Information:
- Manufacturer: Dell
- Manufacturer Part Number: WPPYK
- Type: Memory (RAM)
- Sub-Type: PC4-19200
- Product Name: 64gb Ddr4 Sdram Memory Module
Technical Information
- Storage Capacity: 64gb
- Memory Technology: Ddr4 Sdram
- Number Of Modules: 1 X 64gb
- Bus Speed: 2400mhz Ddr4-2400/Pc4-19200
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl17
- Rank Features: 4rx4
