Description
Installation Process
The YC340 Dell SCSI Hot Swap Hard Drive Sled Tray Bracket is a device used to install SCSI hard drives in Dell Poweredge and Powervault servers. The following is a step-by-step guide to the installation process:
- Prepare the Hard Drive: Before installing the hard drive, ensure that it is properly formatted and contains no important data.
- Open the Server: Locate the server’s cover and remove it by unlocking the latch and pulling it open.
- Locate the Drive Bays: The drive bays are located in the front of the server, and you will need to remove the blank filler panel to access them.
- Insert the Sled: Push the sled into the drive bay and secure it by pushing the tabs on the sides of the sled into the slots on the drive bay.
- Connect the Hard Drive: Connect the hard drive to the sled by aligning the connectors and pressing the drive firmly into place.
- Connect the Power Cable: Connect the power cable to the hard drive by aligning the connectors and pressing the cable firmly into place.
- Connect the SCSI Cable: Connect the SCSI cable to the hard drive by aligning the connectors and pressing the cable firmly into place.
- Replace the Server Cover: Replace the server cover by securing the latch and ensuring that it is properly closed.
- Boot the Server: Boot the server and ensure that the new hard drive is recognized and functioning properly.
Note: Always follow the instructions provided by the manufacturer when installing the YC340 Dell SCSI Hot Swap Hard
Speed and Performance
The speed and performance of the YC340 Dell SCSI Hot Swap Hard Drive Sled Tray Bracket depend on several factors, including the type of SCSI interface used, the speed of the hard drive installed, and the server’s system configuration.
The YC340 supports SCSI Ultra3 (LVD) interfaces, which have a maximum data transfer rate of 320 MB/s. This is faster than earlier SCSI interfaces, which had a maximum transfer rate of 160 MB/s.
The hard drive installed in the YC340 will also impact speed and performance. For example, a 15K RPM SCSI hard drive will offer faster data access and higher performance compared to a 10K RPM hard drive.
The server’s system configuration will also affect speed and performance. For example, the use of hardware-level RAID controllers and multiple hard drives in a stripe or mirror configuration can help improve performance. Additionally, the system’s processor speed, memory capacity, and network connection can also impact performance.
Benefits of Using YC340 SCSI
The YC340 SCSI hot swap hard drive sled tray bracket offers several benefits for Dell PowerEdge and PowerVault servers, including:
- Easy Installation: The YC340 SCSI hot swap drive sled allows for quick and easy installation and removal of hard drives, without the need to power down the server.
- Improved Data Availability: The hot-swap capability of the YC340 SCSI tray means that if a hard drive fails, it can be replaced without any disruption to the server or loss of data.
- Compatibility: The YC340 SCSI tray is compatible with a wide range of Dell PowerEdge and PowerVault servers, allowing for easy integration into your existing infrastructure.
- Increased Storage Capacity: By using the YC340 SCSI tray, you can increase the storage capacity of your server, making it ideal for organizations with rapidly growing data needs.
- Improved Reliability: The YC340 SCSI tray is designed for high performance and reliability, ensuring that your server’s data is always safe and secure.
- Efficient Cooling: The YC340 SCSI tray features a design that provides efficient cooling for the hard drive, helping to protect the data stored on it and extend its lifespan.
General Information
- Part No. # YC340
- Manufacturer : Dell
Compatibility
- Poweredge 700, 800, 1600, 1600sc, 1800, 1850, 2600, 2650, 2800, 2850, 3250, 6600, 6650, 6800, 6850, 7150, Series Servers And Powervault 220s, 221s, 220f, 650f, 660f Scsi Arrays
Key Features
- Cabinet Type : Internal Drive Case
- Modules Qty. : 1
- Storage Controller :
- Supported Devices : Hard Drive
