Description
Capacity and interface
The capacity of a storage device, such as a solid-state drive (SSD), is the amount of data it can hold. In the case of a 1.6TB SAS-12Gbps SSD, the capacity is 1.6 terabytes (TB). This means that the drive can store up to 1,600 billion bytes of data.
The interface of a storage device is the method by which it connects to a computer or other device. SAS (Serial Attached SCSI) is a type of interface that allows for high-speed data transfer between storage devices and a host computer. SAS uses a serial signaling method, as opposed to the parallel signaling method used by the older parallel SCSI interface. SAS 12Gbps is the latest generation of SAS interface, it has a faster data transfer rate than the previous generation SAS 6Gbps and SAS 3Gbps.
So, the 1.6TB SAS-12Gbps SSD has a capacity of 1.6TB and it uses SAS 12Gbps interface. It’s important to note that this SSD will require a SAS 12Gbps controller to connect to a host computer, and that controller should support the capacity of the SSD.
Performance and benchmark
Performance and benchmarking are important factors to consider when choosing a 1.6TB SAS-12Gbps SSD. Performance can be measured in various ways, such as:
- Sequential read and write speeds: These refer to the speed at which data can be transferred to or from the drive in a sequential manner (i.e., reading or writing large blocks of data at a time). A 1.6TB SAS-12Gbps SSD will typically have a sequential read speed of up to 1200MB/s and a sequential write speed of up to 1100MB/s.
- Random read and write speeds (IOPS): These refer to the speed at which data can be transferred to or from the drive in a random manner (i.e., reading or writing small blocks of data at a time). A 1.6TB SAS-12Gbps SSD will typically have a random read speed (IOPS) of up to 200,000 and a random write speed (IOPS) of up to 190,000.
- Latency: Latency is the time it takes for an SSD to start processing a command after it receives it. Lower latency means that the SSD will start processing commands faster, which can lead to better performance.
- Access time: Access time is the time it takes for an SSD to access data after it receives a command. Lower access time means that the SSD can access data faster, which can lead to better performance.
Storage capacity
The storage capacity for a 1.6TB SAS-12Gbps SSD is 1.6 terabytes (TB). A terabyte is a unit of measurement for digital storage and it is equivalent to 1,000,000,000,000 bytes. Therefore, a 1.6TB SAS-12Gbps SSD has a storage capacity of 1,600,000,000,000 bytes. This means that the drive can store up to 1.6 terabytes of data.
It’s important to note that the capacity of a storage device, such as an SSD, is not the same as the usable capacity. The usable capacity is the amount of storage space that is available to the user after taking into account any over-provisioning, formatting, or other factors that may reduce the available space. The usable capacity of a 1.6TB SAS-12Gbps SSD may be slightly less than 1.6TB, depending on the specific model and the manufacturer.
It’s also important to take note that the capacity of an SSD can vary depending on the specific model and manufacturer, so it’s important to check the manufacturer’s specifications before making a purchase.
General Information
- MPN : 0B35001
- Product Type : Solid State Drive
- Manufacturer : Hitachi
- SKU : 0B35001
Technical Information
- Storage Capacity: 1.6TB
- Form Factor : 2.5inch
- Interface : SAS 12GBPS
Dimensions & Weight
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs







