Description
Introduction to HP 146GB SAS Hard Drive
The HP 146GB SAS (Serial Attached SCSI) hard drive is a type of high-performance storage device that is designed for use in enterprise-level servers and data centers. It has a capacity of 146GB, a rotational speed of 15,000 RPM (revolutions per minute), and a data transfer rate of 6Gbps (gigabits per second). The hard drive uses dual-port SAS interface, which allows for high-speed data transfer and redundancy for increased reliability.
The HP 146GB SAS hard drive is a hot-swappable device, which means that it can be replaced while the server is still running, without causing any downtime. This makes it an ideal choice for businesses that require uninterrupted access to their data.
The hard drive is designed to be highly durable and reliable, with features such as error correction code (ECC) and rotational vibration safeguard (RVS) that help to ensure that data is accurately read and written, even in high-vibration environments.
The HP 146GB SAS hard drive is compatible with a wide range of enterprise-level servers and storage arrays, and is often used in applications such as high-performance computing, data warehousing, and transaction processing. It provides a cost-effective solution for organizations that require high-performance storage with high levels of reliability and durability.
Interface and Connectivity Options
The HP 146GB SAS hard drive is designed with a dual-port SAS (Serial Attached SCSI) interface, which provides a high-speed data transfer rate of up to 6Gbps (gigabits per second). The dual-port design also offers redundancy, which means that if one port fails, the other port can take over, ensuring that data access and transfer is not interrupted.
In addition to the SAS interface, the HP 146GB SAS hard drive also has a hot-swappable SFF (Small Form Factor) connector, which allows it to be easily installed and removed from compatible servers and storage arrays. This hot-swappable feature enables businesses to replace a hard drive without shutting down the system, ensuring that data access is not interrupted.
The HP 146GB SAS hard drive is also backward compatible with SAS-2 and SAS-1.0 interfaces, which allows it to be used with older storage systems that have lower data transfer rates. It is also compatible with SATA (Serial Advanced Technology Attachment) interfaces, although this is not the recommended configuration for this hard drive.
Installation and Setup Process
The installation and setup process for the HP 146GB SAS hard drive can vary depending on the server or storage array it is being installed in. However, the basic steps for installation and setup are as follows:
- Ensure that the server or storage array is powered off and unplugged from the electrical outlet.
- Remove the cover or access panel of the server or storage array to gain access to the hard drive bays.
- Locate an empty hard drive bay and remove any protective covers or brackets.
- Insert the HP 146GB SAS hard drive into the empty hard drive bay, making sure that the connectors are properly aligned.
- Secure the hard drive into place using the provided screws or brackets.
- Reattach the cover or access panel of the server or storage array.
- Power on the server or storage array and access the BIOS or RAID configuration utility to configure the new hard drive.
Once the hard drive is installed and configured, it will appear as a new storage device within the operating system of the server or storage array. From here, it can be formatted and partitioned to suit the needs of the business.
It is important to note that the installation and setup process for the HP 146GB SAS hard drive may vary depending on the specific model of server or storage array it is being installed in. It is recommended to consult the manufacturer’s documentation or seek assistance from a qualified technician if there are any questions or concerns about the installation process.
Detail Description
- Manufacturer: HP
- MPN: 518216-002
- Type : Hard Drive (HDD)
- Sub-Type : 146 GB 15K RPM SAS 6 GBPS
- SKU: 518216-002
Technical Information
- Capacity : 146 GB
- Spindle Speed : 15K RPM
- Generation : SAS
- Speed : 6 GB/S
Dimension and Weight
- Width: 2.8 Inch
- Depth: 3.9 Inch
- Height: 0.6 Inch
- Weight: 0.50 LBS
Physical Characteristics
- Drive Bay Width : 2.5 Inch
- Drive Type : Internal