Description
Details Specification
The HP 614828-003 is a 1TB hard drive that operates at 7,200 revolutions per minute (RPM). It uses the SATA (Serial Advanced Technology Attachment) interface with a data transfer rate of 3.0 Gbps. This hard drive is designed for use in internal storage systems, it is intended for mid-range enterprise-level applications that require moderate performance and reliability. The drive is manufactured by HP and is part of their midline product line. It’s a hot-plug drive, which means that it can be removed and replaced without shutting down the server.
Serial Advanced Technology Attachment
The HP 614828-003 hard drive uses the SATA (Serial Advanced Technology Attachment) interface. SATA is a standard interface for connecting storage devices, such as hard drives and solid-state drives, to a computer. It is widely used in consumer and enterprise-level systems and is known for its simplicity and reliability.
The SATA interface used by the HP 614828-003 hard drive has a data transfer rate of 3.0 Gbps, which means that it can transfer data at a rate of 3.0 gigabits per second. This is slower than other interfaces like SAS and NVMe, but it still allows for fast data transfer and improved performance compared to other older interfaces like PATA (Parallel ATA) or SCSI (Small Computer System Interface).
SATA interface also supports hot-swap capabilities, which means that hard drives can be replaced or added to a system without having to shut it down. This helps to improve system availability and reduce downtime.
It’s also important to note that SATA is an older interface, it’s been replaced by SATA III (6 Gbps) and now by faster interfaces like SAS and NVMe. But it’s still widely used in older systems and in applications where high speed data transfer isn’t a critical requirement.
Wide Compatibility
The HP 614828-003 hard drive is designed for use in internal storage systems and is intended for mid-range enterprise-level applications that require moderate performance and reliability. Therefore, the compatibility of this hard drive will depend on the specific system or server in which it is being used.
In terms of interface compatibility, the HP 614828-003 hard drive uses the SATA (Serial Advanced Technology Attachment) interface, version II and it is compatible with servers or storage systems that have a SATA-based controller, version II. However, it’s important to note that the hard drive is not compatible with SATA III or later versions.
In terms of physical compatibility, the HP 614828-003 hard drive conforms to the standard 3.5-inch form factor, so it should be compatible with most servers or storage systems that are designed to accept 3.5-inch hard drives. This hard drive also have a SFF (Small Form Factor) which means that it’s small enough to fit in tight spaces.
In terms of software compatibility, the HP 614828-003 hard drive is compatible with most enterprise-level operating systems such as Windows, Linux, and VMWare.
General Information:
Manufacturer : Hewlett Packard
Manufacturer Part Number : 614828-003
Brand Name : HP
Sub-Type : 1TB 7.2K RPM SATA-II
Type : Hard Drive (HDD)
Technical Information:
Storage Capacity : 1TB
Rotational Speed : 7.2K RPM
Drive Interface : SATA-II
Physical Characteristics:
Drive Type : Internal
Drive Bay Width : 2.5″