Description
Capacity and Speed of 627810-S21 HP Memory
The 627810-S21 HP memory has a capacity of 32GB, which means it is capable of storing 32 gigabytes of data. This is a significant amount of memory and can be useful for running large applications, storing large amounts of data, or running multiple applications at the same time without experiencing performance issues.
The speed of the 627810-S21 HP memory is 1066MHz, which is the frequency at which the memory is able to transfer data. The higher the frequency, the faster the memory can transfer data, which can improve the overall performance of the system. This memory has a PC3-8500 rating, which is a measure of its data transfer rate. This memory has a CL7 timing. CL (CAS Latency) is the delay time between the moment a memory controller sends a read command and the moment data is available. Lower CL is better.
ECC and Quad Rank Technology
ECC, or Error Correction Code, is a technology that detects and corrects errors in memory. ECC memory uses an algorithm to add extra bits to the data stored in memory, which can be used to detect and correct errors that may occur during data transmission or storage. This helps to ensure the integrity of the data and can prevent system crashes or other issues caused by memory errors.
Quad rank technology refers to the way in which the memory chips are arranged on the module. In this case, the memory module has four ranks of memory chips. Each rank is a 64-bit wide data path to the memory controller. Having multiple ranks allows for more data to be stored and retrieved at a time, increasing the overall performance of the memory module.
The HP 627810-S21 32GB memory module uses both ECC and quad rank technology to provide reliable and high-performance memory for HP systems. The module is a Registered DDR3 SDRAM DIMM with a clock speed of 1066 MHz and PC3-8500 CL7 timing, which means that it can transfer data at a rate of 8500 MT/s with a delay of 7 clock cycles.
Installation and Configuration
Installing and configuring the HP 627810-S21 32GB memory module in a system involves several steps. The process can vary depending on the specific system, but generally includes the following steps:
- Turn off the computer and disconnect all cables.
- Open the computer case to access the memory slots.
- Locate the memory slots on the motherboard. These are typically long, rectangular slots that are labeled as DIMM (Dual In-line Memory Module) or RAM (Random Access Memory).
- Determine the memory configuration for the system. This information can be found in the system’s manual or by checking the system’s specifications online.
- Remove the existing memory modules if necessary, by carefully releasing the tabs on either side of the module and gently pulling it out of the slot.
- Carefully align the module with the memory slot and press it down firmly until the tabs on either side of the module click into place.
- Close the computer case and reconnect all cables.
- Power on the computer and enter the system BIOS setup.
- Locate the memory settings in the BIOS and verify that the system recognizes the new memory module.
- Save the changes and exit the BIOS.
General Information
- Brand Name: HP
- MPN: 627810-S21
- Type: Memory (RAM)
- RAM Type: PC3-8500
- Product Name: 32GB DDR3 SDRAM Memory Module
- Product Type: Ram Module
- SKU: 627810-S21
Technical Information
- Storage Capacity: 32GB
- Memory Technology: DDR3 SDRAM
- Number Of Modules: 1 X 32GB
- Memory Speed: 1066MHZ
- Memory Standard: DDR3-1066/PC3-8500
- Error Checking: Ecc
- Features: Quad Rank, Low Voltage, Registered
- Chips Organization: X4
- Designed For: Proliant Server
- Form Factor: 240-Pin Dimm
Physical Characteristics
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility
- HPE Proliant Bl465c G7, Bl685c G7, Dl385 G7, Dl385 G7 Base, Dl385 G7 Entry, Dl385 G7 Performance, Dl585 G7, Dl585 G7 Base
