692290-002 HP 10/100 Netelligent PCI Network Card | Refurbished

The HP 10/100 Netelligent PCI Network Card (part number 692290-002) is a network interface card (NIC) that allows a computer to connect to a network. Some of its features include:

• 10/100Mbps data transfer rate: The card supports both 10Mbps and 100Mbps data transfer speeds, allowing it to work with both older and newer network infrastructure.
• PCI interface: The card connects to the computer via the Peripheral Component Interconnect (PCI) bus, which is a common expansion bus found in most PCs.
• Auto-negotiation: The card can automatically negotiate the best possible data transfer speed and duplex mode with the network it is connected to.
• LED indicators: The card has LED indicators that show the status of the link and data transfer, making it easy to troubleshoot network issues.
• Plug and Play: The card is plug and play, meaning it can be installed and used without the need for additional software or drivers.

Benefits of the HP 10/100 Netelligent PCI Network Card include:

• Reliable and fast network connection: The card provides a reliable and fast network connection, allowing the computer to communicate with other devices on the network.
• Easy to install and use: The card is plug and play and does not require any additional software or drivers to be installed, making it easy to set up and use.

-Compatible with a wide range of systems: The PCI interface makes it compatible with most PCs and servers.

-Easy to troubleshoot: The LED indicators make it easy to troubleshoot network issues.

• Advanced Encryption Standard (AES) support: The 692290-002 HP 10/100 Netelligent PCI Network Card supports AES encryption to protect data transmission from unauthorized access or tampering.
• Virtual Private Network (VPN) support: The card supports VPN protocols such as PPTP and L2TP, allowing for secure remote access to a network.
• Access Control Lists (ACLs): The card supports the use of ACLs to control access to network resources based on user or device identity.
• Secure Shell (SSH) support: The card supports SSH, a secure protocol for remote login and management of network devices.
• Secure Sockets Layer (SSL) support: The card supports SSL, a secure protocol for web-based communications and e-commerce transactions.
• Firewall and intrusion detection: The card supports firewall and intrusion detection features to protect the network from unauthorized access or malicious attacks.
• Quality of Service (QoS) support: The card supports QoS features to prioritize different types of network traffic and ensure optimal performance.

Here are some troubleshooting steps for the HP 10/100 Netelligent PCI Network Card (part number 692290-002):

• Verify that the card is properly installed in the PCI slot. Make sure it is securely seated and that the retention clip is engaged.
• Check that the card is enabled in the BIOS. This can usually be done by pressing a key during the boot process (such as F2 or Del) to enter the BIOS setup, and then navigating to the “Integrated Peripherals” or “On-board Devices” menu.
• Make sure that the correct drivers are installed for the card. You can download the latest drivers from the HP website or from the CD that came with the card.
• Check the network cable and ensure that it is securely connected to the card and to the network. Make sure the cable is not damaged.
• Check the network settings. Make sure that the IP address, subnet mask, and default gateway are correct and that the card is configured for the correct speed and duplex.
• Ensure that the drivers are up to date and compatible with the Operating System.
• If all of the above steps have been checked and the issue persists, contact HP support for further assistance. They may be able to provide additional troubleshooting steps or recommend a repair or replacement.