Description
Storage Capacity
Storage capacity refers to the amount of data that can be stored on a particular storage device. In the case of the HP 4TB 7.2K RPM SATA-6GBPS HDD (part number 739333-004), the storage capacity is 4 terabytes, which is equivalent to 4,000 gigabytes or 4,000,000 megabytes. This means that the drive can hold a large amount of data, including documents, photos, videos, music, and other digital files. The actual amount of data that can be stored may be slightly lower due to formatting, file system overhead, and other factors. However, the high capacity of the drive makes it ideal for use in data centers, servers, and other environments that require large amounts of storage space.
RPM Speed HDD
RPM (revolutions per minute) speed is a measure of how fast a hard disk drive (HDD) spins its magnetic disks. The RPM speed of the HP 4TB 7.2K RPM SATA-6GBPS HDD (part number 739333-004) is 7,200 RPM, which means that the disks rotate at a rate of 7,200 revolutions per minute.
A higher RPM speed generally means faster data access and transfer rates, as the read/write heads can access data more quickly when the disks are spinning faster. This can result in improved system performance, faster data backups and restores, and faster file transfers.
However, higher RPM speeds can also result in higher power consumption and increased heat generation, which can impact system performance and reliability. Additionally, HDDs with higher RPM speeds tend to be more expensive than those with lower RPM speeds.
The 7,200 RPM speed of the HP 4TB HDD strikes a balance between performance and cost-effectiveness, making it a good choice for applications that require fast data access and transfer rates without breaking the bank.
SATA Interface Speed
SATA interface speed refers to the maximum data transfer rate between the hard disk drive (HDD) and the host computer’s SATA controller. The HP 4TB 7.2K RPM SATA-6GBPS HDD (part number 739333-004) is equipped with a SATA III (6.0 Gbps) interface, which provides a maximum data transfer rate of up to 6 gigabits per second. This interface is backwards compatible with older SATA standards (SATA II and SATA I), but the maximum transfer rate will be limited by the slower standard.
The high-speed SATA III interface of the HP 4TB HDD allows for faster data transfer, reducing the time required for file transfers, backups, and other data-intensive operations. It also enables the drive to take advantage of the full bandwidth of the SATA III interface, which is particularly beneficial in high-performance computing environments. Additionally, the SATA III interface is widely used and supported by most modern computers and storage systems, making the HP 4TB HDD compatible with a wide range of systems and applications.
General Information:
- Brand Name : HP
- Manufacturer : Hewlett Packard
- Manufacturer Part Number : 739333-004
- Type : Hard Disk Drive (HDD)
- Sub-Type : SATA-6GBPS
- RPM : 4TB-7.2K
Technical Features:
- Storage Capacity : 4 TB
- Maximum External Data Transfer Rate : 768 Mbps (6 Gbps)
- Rotational Speed : 7200 Rpm
- Drive Interface : Sata/600
- Drive Type : Internal
