Description
Data Protection of LFF Array System
“Data Protection” refers to the measures that are taken to ensure the integrity and availability of data stored on the BK830A HP Storage Works P2000 G3 ISCSI MSA SATA/SAS Dual Controller LFF Array System. This section would typically include information on the different types of data protection features that are supported by the system, such as RAID (Redundant Array of Independent Disks) and backup options.
RAID is a data protection technique that uses multiple disk drives to provide data redundancy and improve performance. The BK830A HP Storage Works P2000 G3 ISCSI MSA SATA/SAS Dual Controller LFF Array System supports several RAID levels including RAID 0, RAID 1, RAID 5, RAID 6, RAID 10 and RAID 50. These RAID levels provide various levels of data protection and performance.
The system also supports different backup options such as remote replication features like Remote Snap and Remote Copy, which allows administrators to easily create and manage remote copies of data to protect against site failures and disasters.
In addition to that, the system has a built-in battery-backed write cache (BBWC) which protects data in case of power failure and the ability to add a redundant power supply. These features ensure that the data is protected even in the event of a power outage.
The BK830A HP Storage Works P2000 G3 ISCSI MSA SATA/SAS Dual Controller LFF Array System also provides other data protection features such as snapshots, which allow administrators to take point-in-time copies of data for backup and recovery purposes.
System Configuration
Management and Monitoring
The management software for the BK830A HP Storage Works P2000 G3 ISCSI MSA SATA/SAS Dual Controller LFF Array System is HP Array Configuration Utility (ACU) and HP StorageWorks P2000 G3 MSA FC/iSCSI/SAS Array System web-based management interface. These tools allow administrators to configure, manage and monitor the system, including creating and managing logical volumes, setting up RAID configurations, monitoring system health and performance, and managing firmware and software updates.
The system also provides monitoring tools such as event logs, SNMP support and performance metrics to identify and troubleshoot issues, and also provide alerts in case of any critical event.
Additionally, HP StorageWorks P2000 G3 MSA FC/iSCSI/SAS Array System supports remote replication features like Remote Snap and Remote Copy which allows administrators to easily create and manage remote copies of data to protect against site failures and disasters.
General Information:
- Device type : hard drive array
- Enclosure type : rack-mountable – 2u
CABINET (CHASSIS):
- Installed devices / modules qty : 0
- Supported devices / modules qty : 12
- Supported drive : serial ata-300 / sas 2
STORAGE:
- Hdd array external interface : iscsi
- Maximum luns : 512
Storage Controllers:
- Type : 2 x raid ( iscsi )
- Controller interface type : serial ata-300 / sas 2.0
- Data transfer rate : 600 mbps
- Cache / buffer size ( max ) : 2 GB
- Raid level : raid 0, raid 1, raid 3, raid 5, raid 6, raid 10, raid 50
- Interface Type : Serial Ata-300 / Sas 2.0
Expansions And Connectivity:
- Expansion bays total (free) : 12 ( 12 – 3.5
- Expansion slots total (free) : 2 ( 2 ) x sfp+
- Interfaces : 2 x management – mini-usb type b 2 x management – rj-45 2 x serial attached scsi 2
POWER:
- Power device : 2 x power supply – hot-plug / redundant – plug-in module
- Power redundancy : yes
- Power redundancy scheme : 1+1
- Voltage required : ac 120/230 v ( 50 – 60 hz )
