Description
Introduction to HP 610N Jetdirect Card
The HP 610N Jetdirect Card is an Ethernet printer network interface card that allows you to connect your printer to a network. J4169-60023 is the part number for this specific model of Jetdirect card.
By installing the Jetdirect card into your printer, you can connect it to a network via an Ethernet cable, allowing multiple users to access the printer from different devices on the network. This can improve productivity in a work environment and make it easier to share the printer between different departments or offices.
The HP 610N Jetdirect Card supports a range of networking protocols, including TCP/IP, IPX/SPX, AppleTalk, DLC/LLC, and NetBEUI. It also features a 10/100Base-TX Ethernet interface, which supports both 10Mbps and 100Mbps network speeds.
To install the Jetdirect card, you will need to open up your printer and locate the expansion slot where it can be installed. Once the card is installed, you can configure it using the printer’s control panel or by accessing its web interface from a computer on the network.
Features and Specifications
J4169-60023 is an HP Jetdirect 610N Ethernet print server card that allows you to connect your HP printer to a network via Ethernet. This card is designed to work with various HP printers and provides reliable and high-speed printing capabilities.
Here are some of the features and specifications of the J4169-60023 HP Jetdirect card
- Compatibility: This card is compatible with various HP printers, including LaserJet 4000, 4050, 4100, 5000, 8000, 8100, and 9000 series printers.
- Network support: The Jetdirect 610N card supports Fast Ethernet (10/100 Mbps) and can be connected to a network via an RJ-45 Ethernet cable.
- Management: The card is managed through HP Web Jetadmin software, which allows you to remotely manage your printer and print jobs.
- Security: The Jetdirect 610N card supports various security protocols, including SSL/TLS, IPsec, and SNMPv3, to help secure your network and printer.
- Compatibility with protocols: The card supports various printing protocols, including TCP/IP, IPX/SPX, AppleTalk, DLC/LLC, and NetWare.
- Firmware updates: HP provides firmware updates for the Jetdirect 610N card, which can be downloaded and installed through the HP website.
Installation Process
The HP J4169-60023 Jetdirect Card is an Ethernet network interface card that allows you to connect your HP printer to a local network. Here are the steps to install the card
- Ensure that the printer is turned off and unplugged from the power source.
- Locate the Jetdirect card slot on the back of the printer. It should be a rectangular slot with two notches on either side.
- Remove the metal cover from the Jetdirect card slot by unscrewing the screws or releasing the clips.
- Insert the Jetdirect card into the slot, making sure that it is aligned with the notches on either side. Apply firm pressure to ensure that the card is securely in place.
- Replace the metal cover by screwing it back in or reattaching the clips.
- Connect an Ethernet cable to the Jetdirect card’s Ethernet port, and connect the other end to a network switch or router.
- Turn on the printer and wait for it to boot up.
- Print a configuration page to verify that the Jetdirect card is installed correctly. You can usually print a configuration page by pressing a button or combination of buttons on the printer’s control panel.
- Configure the Jetdirect card’s network settings using the printer’s control panel or a web browser. You will need to know the IP address of the Jetdirect card, which should be printed on the configuration page.
Once the Jetdirect card is installed and configured, you should be able to print to the printer from any device on the same network.
General Information
- Manufacturer : HP
- Part Number or SKU# J4169-60023
- Sub-Type: Print Server Internal
- Device Type : Print Server
Technical Information
- Form Factor : Plug-In Module
- Connectivity Technology : Wired
- Cabling Type : Ethernet 10Base-T, Ethernet 100Base-Tx
- Data Link Protocol : Ethernet, Fast Ethernet
- Data Transfer Rate : 100 MBPS
- Status Indicators : Port Transmission Speed
- Compliant Standards : IEEE 802.3, IEEE 802.3u
Expansion / Connectivity
- Interfaces : 1 X Network – Ethernet 10Base-T/100Base-Tx – Rj-45 – 1
- Compatible Slots : 1 X Expansion Slot
