J8440-61001 HPE Procurve Switch 10-GBE X2-Cx4 Transceiver | Refurbished

J8440-61001 is an HPE ProCurve Switch 10-GBE X2-Cx4 transceiver. This transceiver is designed for use with HPE ProCurve switches and provides a 10-gigabit Ethernet connection. Here are some of the features and benefits of this transceiver:

Features

• The J8440-61001 transceiver is a hot-swappable device, which means that it can be inserted or removed from the switch without the need to power down the switch.
• This transceiver supports the 10-gigabit Ethernet standard and provides a data transfer rate of up to 10 Gbps.
• It uses the CX4 interface, which is a high-speed, copper-based interface that provides a reliable and low-latency connection.
• The J8440-61001 transceiver is fully compliant with IEEE 802.3ak standards.

Benefits

• The hot-swappable feature of this transceiver makes it easy to install or replace without interrupting network connectivity or causing downtime.
• The 10-gigabit Ethernet connection provided by this transceiver offers a significant boost in network speed and performance compared to traditional gigabit Ethernet connections.
• The CX4 interface used by this transceiver provides a reliable and low-latency connection, which is important for applications that require high-speed data transfer.
• The compliance with IEEE 802.3ak standards ensures that this transceiver is compatible with other devices that also comply with these standards, providing interoperability and ease of use.

J8440-61001 is a transceiver module designed for use with the HPE ProCurve Switch 10-GbE X2-Cx4 module. This transceiver module is used to convert electrical signals into optical signals, which are then transmitted over fiber-optic cables. To ensure optimal performance and reliability of the transceiver, it is important to perform regular maintenance and upkeep.

Here are some tips for maintaining and keeping the J8440-61001 transceiver module in good condition:

• Keep the module clean: It is important to keep the module clean to prevent dust and debris from accumulating on the connectors. Use a lint-free cloth or compressed air to remove any dust or debris.
• Inspect the connectors: Inspect the connectors on the module for any signs of damage or wear. If the connectors are damaged or worn, they may need to be replaced.
• Check the fiber-optic cables: Check the fiber-optic cables connected to the transceiver for any signs of damage or wear. If there are any issues with the cables, they may need to be replaced.
• Keep the module dry: Moisture can damage the transceiver module. Make sure to keep the module dry and avoid exposing it to any liquids.
• Follow manufacturer recommendations: Follow the manufacturer’s recommendations for maintaining and cleaning the transceiver module.

In addition to regular maintenance, it is also important to keep the transceiver module up-to-date with any firmware or software updates that may be released by the manufacturer. These updates can improve performance and address any known issues with the module. Make sure to check the manufacturer’s website regularly for any updates that may be available.

By following these tips and keeping the transceiver module well-maintained and up-to-date, you can ensure optimal performance and reliability of your HPE ProCurve Switch 10-GBE X2-Cx4 transceiver module.

The J8440-61001 is a 10-gigabit Ethernet transceiver module designed for use with HPE ProCurve switches. Specifically, it is an X2-CX4 transceiver, meaning it has a X2 form factor and uses four CX4 connectors to connect to network cables.

In terms of compatibility with HPE ProCurve switches, the J8440-61001 is designed to work with a number of different HPE ProCurve switch models, including:

• HPE ProCurve Switch 3500 series
• HPE ProCurve Switch 5400zl series
• HPE ProCurve Switch 8200zl series

However, it’s important to note that not all HPE ProCurve switches are compatible with the J8440-61001 transceiver. To ensure compatibility, you should consult the documentation for your specific HPE ProCurve switch model to see if it supports X2-CX4 transceivers.

Additionally, it’s worth noting that while the J8440-61001 is designed for use with HPE ProCurve switches, it may also be compatible with other vendor’s switches that support the X2 form factor and CX4 connectors. However, again, you should always consult the documentation for your specific switch model to ensure compatibility before using the J8440-61001 or any other transceiver module.