Description
Layer 2 and Layer 3 switching capabilities
The JE006A HP V1910 Gigabit Ethernet Switch offers both Layer 2 and Layer 3 switching capabilities.
Layer 2 switching is a type of data link layer switching that uses MAC addresses to forward data packets within a LAN. It operates at the Data Link Layer (OSI Layer 2) and is responsible for forwarding data packets based on MAC addresses. Layer 2 switches use the MAC address of a device to determine where to forward a data packet, and they do not look at the IP address of the packet.
Layer 3 switching is a type of network layer switching that uses IP addresses to forward data packets within a LAN or WAN. It operates at the Network Layer (OSI Layer 3) and is responsible for forwarding data packets based on IP addresses. Layer 3 switches use the IP address of a device to determine where to forward a data packet, and they also look at the destination IP address of the packet.
The JE006A switch allows network administrators to configure the switch for both Layer 2 and Layer 3 switching, which allows for more flexibility in network design and improved network performance. The switch supports routing protocols such as RIP and OSPF, and it also supports VLANs, which allow network administrators to segment their network into different virtual LANs.
Energy efficiency and power consumption
The JE006A HP V1910 Gigabit Ethernet Switch is designed with energy efficiency in mind, which helps to reduce power consumption and lower operating costs.
The switch supports Energy Efficient Ethernet (EEE) standard, which allows the switch to automatically reduce power consumption during periods of low network activity. This feature can help to reduce power consumption by up to 40%.
The switch also has a built-in power supply that supports both AC and DC voltage inputs, which allows network administrators to choose the most cost-effective power source for their network. The switch also supports Power over Ethernet (PoE) and PoE+, which allow network administrators to power devices such as IP phones, wireless access points, and security cameras over the Ethernet cable, reducing the need for additional power sources.
In addition, the JE006A switch also has a power-saving feature that allows network administrators to set a schedule for the switch to automatically power off and on, which helps to reduce power consumption when the switch is not in use.
The JE006A switch also supports the IEEE 802.3az Energy Efficient Ethernet standard, which reduces power consumption by automatically reducing power to idle ports and by optimizing power usage during periods of low network activity.
Virtual LAN (VLAN) support of Ethernet Switch
The JE006A HP V1910 Gigabit Ethernet Switch supports Virtual LAN (VLAN) technology, which allows network administrators to segment their network into different virtual LANs. This feature provides an additional layer of security by isolating different types of network traffic, and it also allows network administrators to create more efficient networks by grouping devices and users together based on their network requirements.
VLANs are created by assigning a unique VLAN ID to a group of devices, which allows them to communicate with each other as if they were on the same physical LAN. The JE006A switch supports up to 4,094 VLANs, providing network administrators with the flexibility to segment their network as needed.
The switch also supports VLAN tagging, which allows network administrators to assign multiple VLANs to a single physical port. This feature allows network administrators to create more efficient networks by grouping devices and users together based on their network requirements.
In addition, the switch also supports VLAN Trunking Protocol (VTP), which allows network administrators to easily manage and configure VLANs across multiple switches. This feature simplifies VLAN management and reduces the risk of configuration errors.
General Information about the HPE
- Manufacturer: HP
- Model Number or SKU# J9539A
- Type: Networking
- Switch -Type: 48 Ports
Technical Information
- Enclosure Type : Rack-Mountable – 4u
- Ports : 44 X 10/100/1000 + 4 X Sfp
- Power Over Ethernet (Poe) : Yes
- Performance : Routing/Switching Capacity : 379.2 Gbps
- Throughput : Up To 282.1 MPPS
- Mac Address Table Size : 64k Entries
- Jumbo Frame Support : Yes
- Routing Protocol : Rip-1, Rip-2, Vrrp, Ospfv2, Pim-Sm, Static Ip Routing, Pim-Dm, Igmpv3, Ospfv3, Static Ipv6 Routing, Mldv2, Mld
- Remote Management Protocol : Snmp 1, Rmon 1, Rmon 2, Rmon 3, Rmon 9, Telnet, Snmp 3, Snmp 2c, Http
- Encryption Algorithm : Ssl
- Authentication Method : Secure Shell (Ssh), Radius, Tacacs+, Secure Shell V.2 (Ssh2)
- Processor : 1 X Freescale Powerpc 8540 : 666 Mhz
- Ram : 256 Mb – Ddr Sdram
- Flash Memory : 132 Mb
Power
- Power Device : Power Supply – Hot-Plug / Redundant – Plug-In Module
- Power Redundancy : Optional
- Power Redundancy Scheme : 1+1 (With Optional Power Supply)
- Voltage Required : Ac 120/230 V ( 50/60 Hz )
Expansion / Connectivity
- Interfaces : 44 X 10base-T/100base-Tx/1000base-T – Rj-45 – Poe
- 1 X Rs-232c – Management
- 4 X Sfp (Mini-Gbic)
- Expansion Slot(S) : 6 (Total) / 4 (Free) X Expansion Slot
- 1 (Total) / 0 (Free) X Compactflash Card
- Installed Modules Qty (Max) : 2 (Installed) / 6 (Max)
Dimensions & Weight
- Width: 17.5 inch
- Depth : 17.8 inch
- Height : 6.9 inch
- Weight : 45.59 lbs
