Description
Networking Capabilities and Performance
The J9642A HPE E5406 zl Switch Chassis is a manageable switch that offers a high level of network performance and flexibility. It has a total of 6 expansion slots, allowing for the addition of various network modules and interfaces to expand the capabilities of the switch.
The switch supports a wide range of networking protocols and standards, including VLANs, Quality of Service (QoS), and Link Aggregation Control Protocol (LACP). It also features advanced security features such as access control lists (ACLs) and network access control (NAC) to help protect against network threats.
In terms of performance, the J9642A HPE E5406 zl Switch Chassis offers high-speed data transfer rates of up to 1 Gbps per port, allowing for fast and efficient data transfer across the network. Additionally, it supports up to 384 non-blocking Gigabit Ethernet ports, providing ample capacity for even the most demanding network environments.
Power and cooling Requirements
The J9642A HPE E5406 zl Switch Chassis is a manageable switch that has 6 expansion slots for adding additional modules. This switch is designed for use in a data center or other enterprise network environment.
The power requirements for the J9642A HPE E5406 zl Switch Chassis are as follows:
- Input voltage: 100-240VAC
- Input frequency: 50-60Hz
- Maximum power consumption: 750W
The cooling requirements for the J9642A HPE E5406 zl Switch Chassis are as follows:
- Operating temperature: 32°F to 104°F (0°C to 40°C)
- Storage temperature: -40°F to 158°F (-40°C to 70°C)
- Operating relative humidity: 10% to 90% non-condensing
- Storage relative humidity: 5% to 95% non-condensing
- Altitude: up to 6,562 ft (2,000 m)
It is important to ensure that the power and cooling requirements for the J9642A HPE E5406 zl Switch Chassis are met in order to ensure proper operation and longevity of the device.
Troubleshooting and Maintenance
The J9642A HPE E5406 zl Switch Chassis is a manageable switch that comes with 6 expansion slots. This means that the switch can be expanded by adding additional modules to the empty slots, providing more ports and features.
Troubleshooting the switch may involve checking for connectivity issues, configuring VLANs, or checking for software or hardware failures.
Maintenance on the switch may include updating the firmware, monitoring for high traffic or port utilization, and checking for any errors or alarms in the system logs. It may also involve physically inspecting the switch for any damage or wear and tear, and replacing any failed components. Additionally, it is important to check that all expansion modules are properly seated in their respective slots.
It is also important to regularly backup the switch’s configuration in case of any unexpected issues. This can be done through the web interface or through command-line interface.
It is recommended to schedule regular maintenance checks on the switch to ensure optimal performance and prevent potential issues.
General Information about the HPE J9642A
- Manufacturer: HPE
- Part Number or SKU# J9642A
- Type : Networking
- Switch-Type : Switch Managed
Technical Information
- Enclosure Type : Rack-Mountable – 4u
- Advanced Switching : Layer 4
- Installed Modules Qty (Max) : 6 (Max)
Networking
- Routing Protocol : Rip-1, Rip-2, Ospfv2, Static Ip Routing, Igmpv3, Ospfv3
- Remote Management Protocol : Rmon 2, Telnet, Snmp 3, Http, Tftp
- Connectivity Technology : Wired
- Features : Flow Control, Bootp Support, Vlan Support, Access Control List (Acl) Support, Quality Of Service (Qos), Mld Snooping, Uni-Directional Link Detection (Udld)
- Compliant Standards : IEEE 802.3, IEEE 802.3u, IEEE 802.1d, IEEE 802.1q, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (Lacp), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 801.1p, IEEE 802.1
Power
- Power Over Ethernet (Poe) : Yes
- Power Device : Power Supply
- Installed Qty : 0 (Installed) / 2 (Max)
Expansion / Connectivity
- Expansion Slots Total (Free) : 6 ( 6 ) X Expansion Slot
Dimension and Weight
- Height: 6.9inch
- Width: 17.5inch
- Depth: 17.8inch
- Weight: 24 Lbs
