Description
Energy Efficient Ethernet (EEE) Support
The JG939-61001 HP 5130-48G-2SFP+-2XGT EI 48 Ports Managed Switch is a high-performance and energy-efficient switch designed for use in large enterprise and data center networks. The switch is equipped with 48 Gigabit Ethernet ports and two 10 Gigabit Ethernet SFP+ ports, providing ample connectivity options for a wide range of networking devices. The switch also supports Energy Efficient Ethernet (EEE), a technology that reduces power consumption by dynamically reducing the power used by Ethernet devices during periods of low network utilization. The switch is managed, which means that it can be configured, monitored, and managed remotely through a web interface, making it easy to control and maintain.
Virtual Local Area Network (VLAN) Support
The JG939-61001 HP 5130-48G-2SFP+-2XGT EI 48 Ports Managed Switch is a networking device designed to manage and organize data flow in a local area network (LAN). The switch supports Virtual Local Area Network (VLAN) technology, which allows multiple virtual LANs to be created within a single physical network. This makes it possible for different groups of users to communicate with each other within the same network, without the need for multiple physical switches.
The switch has 48 gigabit Ethernet ports, which provide fast and reliable data transfer for connected devices. It also has two SFP+ ports for fiber-optic connectivity, and two XGT ports for 10 gigabit Ethernet connectivity. The switch is managed, which means that it can be configured and monitored through a web interface or a command-line interface.
The JG939-61001 HP 5130-48G-2SFP+-2XGT EI 48 Ports Managed Switch supports advanced network features such as Quality of Service (QoS), Link Aggregation Control Protocol (LACP), and Spanning Tree Protocol (STP). These features help to optimize network performance and prevent network loops.
Access Control Lists (ACLs)
JG939-61001 HP 5130-48G-2SFP+-2XGT EI is a managed switch that provides 48 Gigabit Ethernet ports and 2 SFP+ ports. The switch also comes with 2 XGT (10 Gigabit Ethernet) ports. This switch is designed to support Access Control Lists (ACLs), which is a feature that allows administrators to control network access and security.
An ACL is a set of rules that specify which network traffic is allowed or denied based on specific conditions. For example, an ACL can be used to allow only specific IP addresses to access a certain network resource, or to block traffic from a specific IP range.
In the case of the HP 5130-48G-2SFP+-2XGT EI switch, the ACLs can be configured to control access to the switch and its ports, as well as to enforce network security policies. This feature can be used to prevent unauthorized access, to control network traffic, and to enhance network security.
In conclusion, the JG939-61001 HP 5130-48G-2SFP+-2XGT EI 48 Ports Managed Switch with Access Control Lists (ACLs) provides administrators with a flexible and powerful tool for controlling network access and security.
General Information
- Manufacturer: HP
- Manufacturer Part Number: JG939-61001
- Type: Networking
- Sub-Type: Switch 48 Ports
- Device Type : Switch – 48 Ports – L3 – Managed – Stackable
- Enclosure Type : Rack-Mountable – 1u
- Subtype : Gigabit Ethernet
- Ports : 48 X 10/100/1000 + 2 X 10 Gigabit Ethernet Sfp+ / 1 Gigabit Ethernet Sfp+ + 2 X 10 Gigabit Ethernet
- Performance : Throughput : Up To 130.9 Mpps ¦ Routing/Switching Capacity : 176 Gbps
- Capacity : Mstp Instances : Up To 64 ¦ Simultaneous Vlans : 4094 ¦ Ipv4 Routing Table Entries : 512 ¦ Ipv6 Routing Table Entries : 256
- Mac Address Table Size : 16384 Entries
- Jumbo Frame Support : 9kb
- Routing Protocol : Rip-1, Rip-2, Igmp, Static Ipv4 Routing, Static Ipv6 Routing
- Remote Management Protocol : Snmp 1, Rmon, Telnet, Snmp 3, Snmp 2c, Https, Tftp, Ssh-2, Scp
- Encryption Algorithm : Ssl
- Authentication Method : Secure Shell (Ssh), Radius, Tacacs, Tacacs+, Secure Shell V.2 (Ssh2), Hwtacacs
- Features : Flow Control, Dhcp Support, Arp Support, Vlan Support, Auto-Uplink (Auto Mdi/Mdi-X), Syslog Support, Weighted Round Robin (Wrr) Queuing, Ipv6 Support, Sflow, Spanning Tree Protocol (Stp) Support, Rapid Spanning Tree Protocol (Rstp) Support, Virtual Route Redundancy Protocol (Vrrp) Support, Multiple Spanning Tree Protocol (Mstp) Support, Port Aggregation Protocol (Pagp) Support, Access Control List (Acl) Support, Quality Of Service (Qos), Committed Access Rate (Car), Dhcp Server, Device Link Detection Protocol (Dldp) Support.
- Ram : 1 Gb – Sdram
- Flash Memory : 512 Mb
Expansion / Connectivity
- Interfaces :
- 48 X 1000base-T – Rj-45
- 2 X Gigabit / 10gbit Lan – Sfp+
- 2 X Gigabit / 10gbit Lan – Rj-45
- 1 X Serial (Console) – Rj-45
Power
- Power Device : External Power Adapter
- Voltage Required : Ac 120/230 V
