Description
Compatibility of the HPE 613922-001 Hard Disk
The HPE 613922-001 Hard Disk is designed to be compatible with HPE ProLiant Gen8 and Gen9 servers, as well as select HPE Storage systems. It uses a 2.5-inch Small Form Factor (SFF) and a Serial Attached SCSI (SAS) interface with a data transfer rate of 6 gigabits per second (Gbps).
It is important to note that the compatibility of the HPE 613922-001 Hard Disk may depend on the specific server or storage system in which it is being installed. It is recommended to check the documentation of the server or storage system to ensure compatibility with the HPE 613922-001 Hard Disk.
In addition, firmware updates may be required to ensure proper operation of the HPE 613922-001 Hard Disk in certain systems or operating environments. It is important to check for any necessary firmware updates before installing the hard disk.
Installation and Setup of the HPE 613922-001 Hard Disk
Here are some general steps for installing and setting up the HPE 613922-001 Hard Disk:
- Read the documentation: Before beginning the installation, read the documentation that came with the hard disk and the server or storage system to ensure compatibility and proper installation.
- Prepare the server or storage system: Power off the server or storage system and disconnect it from the power source. Open the chassis or storage enclosure where the hard disk will be installed.
- Insert the hard disk: Carefully insert the HPE 613922-001 Hard Disk into the appropriate bay or slot, ensuring that it is seated securely and properly aligned with the connector. Note that the hard disk may require additional brackets or hardware for installation.
- Connect cables: Connect the data and power cables to the hard disk, making sure they are firmly seated and properly aligned with the connectors.
- Secure the hard disk: If necessary, secure the hard disk with screws or other hardware provided by the server or storage system manufacturer.
- Power on the server or storage system: Once the hard disk is installed and secured, reconnect the server or storage system to the power source and power it on.
- Configure the hard disk: Depending on the server or storage system, you may need to configure the hard disk using the system’s management software or BIOS settings.
Data Transfer Rates of the HPE 613922-001 Hard Disk
Here are some general steps for installing and setting up the HPE 613922-001 Hard Disk:
- Read the documentation: Before beginning the installation, read the documentation that came with the hard disk and the server or storage system to ensure compatibility and proper installation.
- Prepare the server or storage system: Power off the server or storage system and disconnect it from the power source. Open the chassis or storage enclosure where the hard disk will be installed.
- Insert the hard disk: Carefully insert the HPE 613922-001 Hard Disk into the appropriate bay or slot, ensuring that it is seated securely and properly aligned with the connector. Note that the hard disk may require additional brackets or hardware for installation.
- Connect cables: Connect the data and power cables to the hard disk, making sure they are firmly seated and properly aligned with the connectors.
- Secure the hard disk: If necessary, secure the hard disk with screws or other hardware provided by the server or storage system manufacturer.
- Power on the server or storage system: Once the hard disk is installed and secured, reconnect the server or storage system to the power source and power it on.
- Configure the hard disk: Depending on the server or storage system, you may need to configure the hard disk using the system’s management software or BIOS settings.
General Information
- Manufacture: HPE
- MPN: 613922-001
- Type : Hard Drive (HDD)
- Sub-Type : 600GB 10K RPM SAS 6GBPS
- SKU: 613922-001
Technical Information
- Device Type : Hard Drive – Hot – Swap
- Capacity : 600 GB
- Form Factor : 2.5 SFF
- Interface : SAS 6GB/S
- Data Transfer Rate : 600 MBPS
- Spindle Speed : 10000 RPM
- Designed For : Enterprise Virtual Array P6350
Expansion & Connectivity
- Interfaces : 2 X SAS 6GB/S
- Compatible Bay : 2.5 SFF
