Description
Features of the 2 Ports Adapter
The HPE 656244-001 10GBE 2 Ports 530 SFP+ Adapter is a high-performance network adapter designed for use in HPE ProLiant servers and other compatible systems. It is a dual-port adapter that supports 10 Gigabit Ethernet (10GbE) speeds and is equipped with two SFP+ (small form-factor pluggable) ports.
The adapter is built on the latest Intel 82599ES controller and is designed to provide high-speed data transfer and low latency. It is optimized for use in virtualized environments and supports advanced features such as Virtual Machine Device Queues (VMDq) and Single Root I/O Virtualization (SR-IOV) for improved performance and scalability.
The adapter also supports advanced features such as Quality of Service (QoS) and Virtual LAN (VLAN) tagging for improved network traffic management. It also supports jumbo frames (up to 9.5 KB) and is compatible with a wide range of operating systems, including Windows, Linux, and VMware.
The HPE 656244-001 10GBE 2 Ports 530 SFP+ Adapter is designed to be easy to install and manage, with an intuitive web-based management interface that allows for easy configuration and monitoring of the adapter’s performance. It also includes a comprehensive set of diagnostic tools for troubleshooting and monitoring network performance.
Installation and Setup
The HPE 656244-001 10GBE 2 Ports 530 SFP+ Adapter is a high-performance network adapter that can be used to upgrade the network connectivity of your server or workstation. The adapter is equipped with two SFP+ ports, which can be used to connect to 10 Gigabit Ethernet networks.
Installation of the HPE 656244-001 10GBE 2 Ports 530 SFP+ Adapter is relatively simple and straightforward. Here are the steps to follow:
- Power off the server or workstation where the adapter will be installed.
- Open the server or workstation case and locate an available PCIe slot.
- Carefully insert the adapter into the PCIe slot, making sure that it is properly seated and securely fastened.
- Connect the SFP+ transceivers to the adapter by inserting them into the SFP+ ports.
- Power on the server or workstation.
- Install the necessary device drivers for the adapter. These can be obtained from the HPE website or from the included CD.
- Configure the adapter by setting the IP address, subnet mask, and other network settings as needed.
- Test the adapter to ensure that it is properly configured and working correctly.
- Close the server or workstation case and your installation is completed.
It’s important to note that before starting the installation process, you should check the compatibility of the adapter with your server or workstation, and also make sure that you have the necessary tools and equipment to complete the installation.
Performance and Scalability
The HPE 656244-001 10GBE 2 Ports 530 SFP+ Adapter is a high-performance and scalable network adapter designed for use in enterprise environments. It offers two ports for 10 Gigabit Ethernet connectivity, each of which is equipped with a Small Form-Factor Pluggable (SFP+) transceiver. This allows for the use of fiber-optic or copper cables to connect to other network devices.
The adapter is designed to offer high performance, with low latency and high throughput. It utilizes advanced data processing techniques to optimize network traffic and minimize bottlenecks, allowing for efficient and reliable data transfer.
In terms of scalability, the HPE 656244-001 10GBE 2 Ports 530 SFP+ Adapter is designed to work seamlessly with other network devices and can be easily integrated into existing networks. It also supports Virtual Machine Device Queues (VMDq), which allows for efficient data transfer between virtual machines running on the same host.
Additionally, the adapter is designed to work with HPE ProLiant servers and HPE BladeSystems, ensuring compatibility and ease of integration.
General Specifications:
Manufacturer: HPE
MPN: 656244-001
Spare Part Number: 652503-B21
Type: Networking
Adapter Type: 10 Gigabit Adapter
Form Factor: Standard and Low Profile Adapter Compliant with the PCIe Standard
Network Processor: Cavium 57810S chipset
SKU: 656244-001
Data Rate: Two Ports, each at 20Gbps Bi-Directional; 40Gbps Aggregate Bi-Directional Theoretical Bandwidth
Onboard Memory (Interface Type): PCI Express 2.0 (Gen 2) x8
PCI Specification Revision: PCIe 2.0
Included Accessories: Low-Profile Bracket, Full-Height Bracket
Networking Specifications
Connectivity Technology: Wired
Data Link Protocol: 10 GigE
Data Transfer Rate: 10 Gbps
Features: IPv6 Support, Jumbo Frames Support, Teaming Support, PXE Support, Large Send Offload (LSO), Receive Side Scaling (RSS), TCP Segmentation Offload (TSO)
Ports: 10Gb Ethernet x 2
Remote Management Protocol: SNMP
Status Indicators: Port Status, Link/Activity
Power Specification
Power Consumption: 9Watt Maximum
Environmental Specifications
Temperature – Operating: 0° to 55°C (32° to 131°F)
Humidity – Operating: 5% to 95% Non-Condensing
Processor / Memory:
Processor: 1 x BCM57810S – Broadcom
RAM: 256 MB
Expansion / Connectivity
Compatible Slots: 1 x PCI Express 3.0 x8
Interfaces: 2 x 10Gb Ethernet – SFP+
Product Dimensions & Weight
Width: 9.50 inch
Height: 2.25 inch
Depth: 7.50 inch
Weight: 1.00 lbs
Software / System Requirements:
OS Required: SuSE Linux Enterprise Server 11, Microsoft Windows Server 2008 R2, SuSE Linux Enterprise Server 10, Microsoft Windows HPC Server 2008, Microsoft Windows Server 2008 (32/64-bits), Oracle Solaris 10, Red Hat Enterprise Linux 6.1, Red Hat Enterprise Linux 5.7
Compliant Standards:
IEEE Compliance: 802.3, 802.3ae, 802.3x, 802.2x, 802.3ad, 802.1Qaz, 802.1Qau, 802.1Qbb, 802.1Qbg, 802.1ax
RoHS Compliance: 6 of 6
Agency Approvals
USA: FCC Part 15 Class A
Canada: ICES-003, Issue 4
Japan: VCCI V3 (2010.04) Class A
International: EN55022:2006 + A1:2007 Class A, EN55022:2006 + A1:2007 Class A, EN55024:1998+A1:2011+A2, EN61000-3-2:2006, EN61000-3-3:2008
Taiwan: BSMI, CNS13438 (2006) Class A
Australia/New Zealand (AS/NZS): EN55022:2006+A12007 Class A
Korea: KN22 Class A, KN24
Compatibility:
HPE Apollo 4200 Gen9 Server
HPE ProLiant DL Series: DL20 Gen9, DL60 Gen9, DL80 Gen9, DL120 Gen9, DL160 Gen9, DL180 Gen9, DL360 Gen9, DL360 Gen10, DL380 Gen9, DL380 Gen10, DL560 Gen9, DL560 Gen10, DL580 Gen9, DL580 Gen10 Servers
HPE ProLiant DL Series (Rack-Optimized): DL160 Gen8, DL165 Gen7, DL360e Gen8, DL360p Gen8, DL380e Gen8, DL380p Gen8, DL385p Gen8, DL580 Gen7, DL585 Gen7, DL980 Gen7 Servers
HPE ProLiant ML Series: ML30 Gen9, ML350 Gen9 Servers
HPE ProLiant ML Series (Expansion-Optimized): ML350e Gen8, ML350p Gen8 Servers
HPE ProLiant SL Series (Scalable Line): SL230s Gen8 and SL250s Gen8 Servers
HPE Apollo XL Series: 2000-XL170r Gen9, 2000-XL190r Gen9, 4500 XL450 Gen9 and 6500 XL270d Gen9 Servers
