Description
Technical Specifications
Sure, here are the technical specifications of the HPE 713964-001 600GB 10K RPM SAS-6GBPS SFF Enterprise Hard Drive:
- Capacity: The 713964-001 hard drive has a storage capacity of 600GB.
- Interface: The drive uses a SAS-6GBPS interface, which supports high-speed data transfer rates of up to 6 Gbps.
- Form Factor: This is a small form factor (SFF) hard drive, which means it has a 2.5-inch form factor. This makes it ideal for use in servers and storage arrays where space is at a premium.
- Spindle Speed: The 713964-001 hard drive has a spindle speed of 10,000 revolutions per minute (RPM). This means it can read and write data faster than slower spinning hard drives.
- Buffer Size: The drive has a 16MB cache buffer, which helps to improve performance by temporarily storing frequently accessed data.
- Seek Time: The average seek time for this drive is 3.5ms for reads and 4.0ms for writes. This means it can quickly locate and retrieve data.
- Compatibility: The 713964-001 hard drive is compatible with a wide range of HPE servers and storage systems, including the ProLiant DL and ML series, as well as the BladeSystem c-Class enclosures.
- Reliability: This hard drive is designed for enterprise use and features advanced technologies to ensure reliability, including error correction and detection, as well as rotational vibration sensors to help prevent data loss due to vibration. It also has a Mean Time Between Failure (MTBF) rating of 2 million hours, which means it is expected to last for a long time.
These technical specifications demonstrate that the HPE 713964-001 hard drive is a high-performance and reliable storage solution that is designed to meet the demands of enterprise-level applications.
Understanding SAS-6GBPS and SFF Technology
SAS stands for Serial Attached SCSI (Small Computer System Interface). It is a point-to-point serial protocol used to transfer data between computer systems and storage devices. SAS-6GBPS is a version of the SAS protocol that supports data transfer rates of up to 6 gigabits per second (Gbps). This makes it a high-speed interface that is commonly used in enterprise-level storage systems where speed and reliability are crucial.
SAS-6GBPS offers several advantages over other storage interfaces such as SATA. For instance, it provides better reliability due to its use of a point-to-point architecture, where each storage device is connected directly to the host system. This reduces the likelihood of data loss due to a failed connection. Additionally, SAS-6GBPS supports advanced features such as hot swapping, which allows for easy replacement of faulty drives without shutting down the system.
SFF:
SFF stands for Small Form Factor, and it refers to the size and shape of a storage device. SFF hard drives typically have a smaller form factor than traditional 3.5-inch hard drives, which makes them ideal for use in space-constrained environments, such as servers and storage arrays.
SFF drives are available in several form factors, with the most common being 2.5-inch and 1.8-inch drives. The smaller size of SFF drives means that they consume less power and generate less heat than larger drives. This can lead to lower cooling costs and a more energy-efficient system.
In summary, SAS-6GBPS and SFF technologies are commonly used in enterprise-level storage systems due to their high-speed data transfer rates, reliability, and space-saving designs. They offer several advantages over traditional storage interfaces and larger hard drives, making them ideal for use in modern data centers and server environments.
Maintenance and Troubleshooting Tips
Maintenance Tips:
- Keep the drive clean and free from dust and debris by regularly cleaning it with a soft, lint-free cloth.
- Ensure that the system fans and air filters are clean and functioning properly to prevent the drive from overheating.
- Monitor the health of the drive using HPE’s Smart Storage Administrator or other monitoring software to identify potential issues before they become major problems.
- Replace the drive if it shows signs of wear or has exceeded its expected lifespan.
Troubleshooting Tips:
- Check the system logs for any error messages related to the drive.
- Ensure that the drive is properly connected to the system and that all cables and connectors are secure.
- Run diagnostics on the drive using HPE’s Smart Storage Administrator or other diagnostic software to identify any issues with the drive.
- If the drive is making unusual noises or is not responding, power down the system and contact HPE support for assistance.
It’s important to note that the above tips are general guidelines and that specific maintenance and troubleshooting procedures may vary depending on the system and environment in which the drive is being used. Always refer to the manufacturer’s documentation for specific instructions and recommendations.
Product Information:Manufacturer Name: HPE
MPN: 713964-001
Type: Hard Drive – Internal
HDD Type: SAS 6GBPS
Option Part Number: EG0600FBLSH
Spare Part Number: 619286-003
Assembly Number: 713827-B21
SKU: 713964-001
Technical InformationHDD Capacity: 600GB
Form Factor: 2.5 Inch SFF
Interface: SAS-6GBPS
Spindle Speed: 10000 RPM
External Data Transfer Rate: 600 MBPS
Bytes per Sector: 512
Dimension and WeightWidth: 2.8 Inch
Depth: 3.9 Inch
Height: 0.6 Inch
Weight: 0.50 LBS
Environmental ParametersMin Operating Temperature: 50 °F
Max Operating Temperature: 95 °F
Compatibility:HPE ProLiant BL Series: BL420c Gen8 (2.5 inch), BL465c Gen8 (2.5 inch), BL660c Gen8 (2.5 inch), BL660c Gen8 Performance (2.5 inch)
HPE ProLiant BL Series: DL320e Gen8 (2.5 inch), DL320e Gen8 Base (2.5 inch), DL320e Gen8 Entry (2.5 inch), DL320e Gen8 Performance (2.5 inch), DL360e Gen8 (2.5 inch), DL360e Gen8 Base (2.5 inch), DL360e Gen8 Entry (2.5 inch), DL360e Gen8 Performance (2.5 inch), DL360p Gen8 CMS (2.5 inch), DL360p Gen8 Performance (2.5 inch), DL380e Gen8 (2.5 inch), DL380e Gen8 Base (2.5 inch), DL380e Gen8 Entry (2.5 inch), DL380e Gen8 High Performance (2.5 inch), DL380e Gen8 Storage (2.5 inch), DL380p Gen8 Performance (2.5 inch), DL380p Gen8 Special (2.5 inch), DL385p Gen8 (2.5 inch), DL385p Gen8 Dedicated Workload (2.5 inch), DL385p Gen8 Entry (2.5 inch), DL385p Gen8 Maximized Consolidation (2.5 inch), DL385p Gen8 Storage (2.5 inch), DL385p Gen8 Storage Centric (2.5 inch), DL560 Gen8 (2.5 inch), DL560 Gen8 Base (2.5 inch), DL560 Gen8 Entry (2.5 inch), DL560 Gen8 Performance (2.5 inch)
HPE ProLiant MicroServer Series: MicroServer Gen8 (2.5 inch), MicroServer Gen8 Base (2.5 inch), MicroServer Gen8 Base Starter Kit (2.5 inch), MicroServer Gen8 Entry (2.5 inch)
HPE ProLiant ML Series: ML110e Gen8 (2.5 inch), ML310e Gen8 (2.5 inch), ML310e Gen8 Base (2.5 inch), ML310e Gen8 Entry (2.5 inch), ML310e Gen8 Performance (2.5 inch), ML350e Gen8 (2.5 inch), ML350e Gen8 Base (2.5 inch), ML350e Gen8 Entry (2.5 inch), ML350e Gen8 Performance (2.5 inch), ML350e Gen8 v2 (2.5 inch), ML350p Gen8 (2.5 inch)
HPE ProLiant SL Series: SL210t Gen8 (2.5 inch), SL210t Gen8 1U Node (2.5 inch), SL230s Gen8 1U Left Half Width Tray (2.5 inch), SL250s Gen8 2U PCIe Gen3 Left Tray (2.5 inch), SL250s Gen8 2U PCIe Gen3 Right Tray (2.5 inch), SL250s Gen8 Base 2U Left Half Width Tray (2.5 inch), SL250s Gen8 Base 2U Right Half Width Tray (2.5 inch), SL250s Gen8 Left Tray (2.5 inch), SL250s Gen8 Right Tray (2.5 inch), SL270s Gen8 1U Left Half Width Tray (2.5 inch), SL270s Gen8 1U Right Half Width Tray (2.5 inch), SL270s Gen8 Base 4U Left Half Width Tray (2.5 inch), SL270s Gen8 Base 4U Right Half Width Tray (2.5 inch), SL270s Gen8 SE 4U Left Tray (2.5 inch), SL270s Gen8 SE 4U Right Tray (2.5 inch), SL4540 Gen8 (2.5 inch), SL4540 Gen8 Tray 2x Node Server (2.5 inch)
HPE ProLiant WS Series: WS460c Gen8 (2.5 inch)
