Description
Improved Energy Efficiency
The 714684-S21 HP BLC7000 Enclosure is a rack-mountable power supply with a hot-plug capability and a maximum output of 2400 Watts. The improved energy efficiency of this power supply is achieved through several different design features and technologies.
One of the key ways that the 714684-S21 improves energy efficiency is through the use of high-efficiency power conversion circuits. These circuits are designed to reduce the amount of energy lost as heat during the power conversion process, which helps to reduce the overall power consumption of the system.
Another important factor in the improved energy efficiency of the 714684-S21 is its ability to dynamically adjust the power output based on the needs of the system. This helps to reduce the amount of power that is wasted, as the system only uses the power that is necessary to meet its current needs.
Additionally, the 714684-S21 also includes a number of power management features that help to further improve its energy efficiency. For example, it may include a power capping feature that allows administrators to limit the maximum power consumption of the system, or a power monitoring feature that allows them to track and analyze the power usage of individual components within the system.
Redundant Power Supply Configuration
The redundant power supply configuration of the 714684-S21 HP BLC7000 Enclosure rack mountable power supply is designed to provide reliable and continuous power supply to the server. The redundant power supply configuration means that there are two power supplies installed in the enclosure, working together to provide the necessary power. In case one of the power supplies fails, the other one will continue to provide power, thus ensuring that the server does not shut down.
The power supply is hot-plug, which means that it can be removed or replaced without having to shut down the server. This feature enhances the maintenance and repair process, as the server can continue to function even when the power supply is being replaced.
The power supply has a capacity of 2400 watts, which is sufficient to power a typical server. The power supply is rack mountable, which means that it can be installed in a standard 19-inch server rack.
Installation and Configuration
The HP BLC7000 Enclosure Rack Mountable Power Supply Hot Plug 2400 Watt (714684-S21) is an efficient and reliable power supply solution for server racks. To install and configure the power supply, you need to follow these steps:
- Mount the power supply into the server rack.
- Connect the power cables from the power supply to the server or storage devices.
- Connect the power cords from the power supply to the electrical outlet.
- Power on the server or storage devices.
- Log into the management interface of the server or storage device to verify that the power supply is functioning properly.
It is recommended to follow the manufacturer’s instructions and guidelines while installing and configuring the power supply. Proper grounding and electrical safety procedures should be followed to ensure the safety of personnel and equipment. If you encounter any issues during the installation and configuration process, consult the manufacturer’s documentation or seek technical assistance.
General Information:
- Form Factor: RACK-MOUNTABLE
- Supported Blades Qty: Up To 16
- Built-In Devices: Status Lcd, HP Onboard Administrator With Kvm Option
- Included Interconnect Modules: 2 HP BLC VC FLEXFABRIC 10GB/24-PORT MODULE
- 16 IC-BL Licenses – Insight Control For Bladesystem
- Cooling System: Rear : FAN X 10 / HOT-SWAP
- Rear : FAN MOUNT X 10 / HOT-SWAP
POWER:
- Power Device: Power Supply – Hot-Plug
- Installed Qty: 6
- Voltage Required: Ac 120/230 V ( 50/60 Hz )
- Power Provided: 2400 WATT
DIMENSIONS & WEIGHT:
- Width 29.9 In
- Depth 23.9 In
- Height 39.9 In
