Description
Energy Efficiency Management
Energy efficiency management for the HPE Ethernet Network 10GB 1 Port 544 FLR SFP Adapter involves optimizing the adapter’s power consumption to reduce energy costs and environmental impact. The following are some of the key aspects of energy efficiency management:
- Power management settings: The adapter may have power management settings that allow you to control its power consumption. For example, you may be able to configure the adapter to enter a low-power mode when it is not in use.
- Wake-on-LAN: Wake-on-LAN is a feature that allows the adapter to be remotely powered on when it receives a wake-up signal. This can help reduce energy consumption by allowing devices to be powered off when not in use.
- Energy-efficient Ethernet (EEE): EEE is a feature that allows the adapter to enter a low-power mode when there is no network traffic. This can help reduce energy consumption when the network is idle.
- Energy monitoring: Many network management tools include energy monitoring features that allow you to track the power consumption of the adapter and other network devices. By monitoring energy consumption, you can identify areas where energy usage can be optimized.
- Virtualization: Virtualization can help reduce energy consumption by allowing multiple virtual machines to share a single physical adapter. This can help reduce the number of physical adapters needed and reduce energy consumption.
By implementing energy efficiency management for the HPE Ethernet Network 10GB 1 Port 544 FLR SFP Adapter, you can reduce energy costs and environmental impact while maintaining network performance. It is important to regularly review and optimize power management settings to ensure that they remain effective and do not negatively impact network performance.
Configuring Network Settings
Configuring network settings for the HPE Ethernet Network 10GB 1 Port 544 FLR SFP Adapter involves setting up the necessary parameters to enable the adapter to communicate with other devices on the network. The following are some of the key network settings that need to be configured:
- IP address: The IP address is a unique identifier that is used to communicate with other devices on the network. You need to assign a unique IP address to the adapter.
- Subnet mask: The subnet mask is used to determine which part of the IP address represents the network and which part represents the host. The subnet mask should match the network configuration of the network to which the adapter is connected.
- Default gateway: The default gateway is the IP address of the device that the adapter uses to communicate with devices on other networks. You need to specify the IP address of the default gateway.
- DNS server: The DNS server is used to resolve hostnames to IP addresses. You need to specify the IP address of the DNS server.
- VLAN ID: If your network uses VLANs, you need to specify the VLAN ID that the adapter should use.
- Quality of Service (QoS): QoS is used to prioritize traffic on the network. You can configure QoS settings for the adapter to ensure that important traffic, such as voice or video, receives higher priority than less important traffic.
- Jumbo frames: Jumbo frames are larger than standard Ethernet frames and can improve network performance for certain types of traffic. You can enable jumbo frames for the adapter if your network supports it.
Once you have configured the network settings for the adapter, it should be able to communicate with other devices on the network. It is important to test the network connectivity to ensure that the adapter is functioning correctly.
Installation Requirements
Installation requirements for the HPE Ethernet Network 10GB 1 Port 544 FLR SFP Adapter are the prerequisites necessary to successfully install and configure the adapter in a server. The following are some of the key installation requirements:
- Compatible server: The adapter must be compatible with the server model and its operating system. It is recommended to check the HPE website for the compatibility list before purchasing the adapter.
- Available PCI Express slot: The adapter requires a PCI Express slot to connect to the server. Ensure that the server has an available slot that matches the specifications of the adapter.
- Driver software: The driver software for the adapter should be downloaded and installed on the server. The driver software ensures that the adapter works properly and can communicate with the server’s operating system.
- SFP module: The adapter requires an SFP module to connect to the network. Ensure that the SFP module is compatible with the adapter and the network infrastructure.
- Network configuration: The network configuration of the server should be set up correctly to ensure that the adapter can communicate with other devices on the network. This includes assigning an IP address, subnet mask, and gateway to the adapter.
- Power supply: Ensure that the server has adequate power supply to support the adapter and other installed components.
- Physical installation: The adapter should be installed correctly into the server’s PCI Express slot and secured using the appropriate screws or clips.
It is essential to follow the installation requirements to ensure that the adapter functions correctly and provides optimal network performance.
General Information
- Manufacturer: HPE
- Part Number or SKU# 724210-001
- Type: Networking
- Adapter Type: Network Adapter 1 Port
Performance
- Data Link Protocol Gigabit Ethernet
- Interface / Connectivity PCI-Express
- Ports Type QSFP