Description
Installation and Configuration
The 748742-001 HPE Bladesystem C-Class 40GB QSFP+ Mpo SR4 300M Transceiver is a high-speed fiber optic transceiver module that is designed to be used with HPE Bladesystem C-Class switches and network devices. This module provides a high-speed data transfer rate of up to 40 gigabits per second (Gbps) over a distance of up to 300 meters using multimode fiber optic cables.
Here are the steps to install and configure the 748742-001 HPE Bladesystem C-Class 40GB QSFP+ Mpo SR4 300M Transceiver:
- Turn off the HPE Bladesystem C-Class switch or network device where you want to install the transceiver.
- Locate the transceiver slot on the switch or network device. Depending on the model, it may be a module slot or a port on the switch.
- Remove the protective cover from the transceiver slot.
- Insert the transceiver module into the slot until it clicks into place.
- Connect the multimode fiber optic cable to the MPO connector on the transceiver module.
- Connect the other end of the cable to the corresponding port on the switch or network device.
- Power on the switch or network device.
- Configure the switch or network device to use the new transceiver module. This may involve configuring the speed and duplex settings, as well as any VLAN or other network settings.
- Test the connectivity of the switch or network device using the new transceiver module to ensure that it is functioning properly.
Performance and Reliability
The HPE Bladesystem C-Class 40GB QSFP+ Mpo SR4 300M Transceiver is a high-performance optical transceiver module designed to provide reliable data communication in HPE BladeSystem C-Class enclosures. Here’s what each part of the product code refers to:
- 748742-001: This is the part number for the HPE Bladesystem C-Class 40GB QSFP+ Mpo SR4 300M Transceiver.
- HPE Bladesystem C-Class: This refers to the specific line of HPE BladeSystem products that this transceiver is compatible with.
- 40GB QSFP+: This transceiver module supports 40 Gigabit Ethernet (GbE) data rates, and uses a quad small form-factor pluggable (QSFP+) interface to connect with other network devices.
- Mpo SR4: This refers to the type of optical connector used by the transceiver. Mpo stands for “multi-fiber push-on,” which is a type of connector that can accommodate up to 12 optical fibers. SR4 stands for “short-range 4-lane,” which indicates that this transceiver is optimized for short-distance data transmissions over 4 optical lanes.
- 300M: This refers to the maximum distance that this transceiver can transmit data reliably, which is up to 300 meters.
In terms of performance, the HPE Bladesystem C-Class 40GB QSFP+ Mpo SR4 300M Transceiver is capable of supporting high-speed data transmissions over short distances. With a maximum data rate of 40 GbE, it is well-suited for use in data centers and other high-performance computing environments that require fast and reliable data transfer. The Mpo SR4 connector type enables the transceiver to support multiple optical fibers, which can increase the total bandwidth available for data transmission.
In terms of reliability, the HPE Bladesystem C-Class 40GB QSFP+ Mpo SR4 300M Transceiver is designed to meet high standards of quality and performance. It is built to withstand the demands of data center environments, with robust construction that provides protection against temperature fluctuations, humidity, and other environmental factors. Additionally, HPE offers a limited warranty on the transceiver module to provide customers with added peace of mind. Overall, this transceiver is a reliable and high-performing option for organizations that require fast and efficient data transfer in their IT infrastructure.
Key Features of QSFP+ Transceiver
The 748742-001 HPE Bladesystem C-Class 40GB QSFP+ Mpo SR4 300M Transceiver is a networking device that is designed for use with Hewlett Packard Enterprise (HPE) BladeSystem C-Class servers. This transceiver is used to connect network switches, routers, and other devices to the BladeSystem C-Class servers, enabling high-speed data transfer and communication.
Here are some of the key features of the 748742-001 HPE Bladesystem C-Class 40GB QSFP+ Mpo SR4 300M Transceiver:
- High Speed: This transceiver is capable of supporting data transfer speeds of up to 40 Gbps, making it ideal for high-speed networking applications.
- MPO Connector: The transceiver features an MPO connector, which is a type of optical fiber connector that allows for the simultaneous transmission of multiple signals.
- SR4 Technology: The transceiver uses SR4 technology, which stands for “short reach 4-lane.” This technology enables high-speed data transfer over short distances, up to 300 meters.
- QSFP+ Form Factor: The transceiver is designed in a QSFP+ form factor, which is a compact and low-power design that allows for easy installation and operation.
- Multi-Mode Fiber: The transceiver is compatible with multi-mode fiber, which is a type of optical fiber that allows for the transmission of multiple signals at once.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: 748742-001
- Type: Networking
- Sub-Type: 40 Gigabit
- Device type : qsfp+ transceiver module
- Form factor : plug-in module
Networking
- Connectivity technology : wired
- Cabling type : 40gbase-sr4
- Data link protocol : 40 gigabit ethernet
- Data transfer rate : 40 gbps
- Optical wave length : 850 nm
- Max transfer distance : 984 ft
- Compliant standards : ieee 802.3ba
Expansions And Connectivity
- Interfaces : 1 X Ethernet 40gbase-Sr4 – Mpo Multi-Mode
