Description
Memory Speed and Timing
“Memory Speed and Timing” refers to the performance characteristics of the RAM in the 753222-201 HPE 32GB 2133mhz DDR4 SDRAM Ecc Reg Pc4-17000 Ram.
“Memory Speed” is the rate at which the memory can transfer data, and is measured in MHz (Megahertz). In this case, the memory speed is 2133 MHz, which means the RAM can transfer data at a rate of 2133 million times per second. The higher the memory speed, the faster the RAM can access and transfer data, which can result in improved system performance.
“Timing” refers to the number of clock cycles it takes for the RAM to access a specific piece of data. It is typically represented as a series of four numbers, such as “15-15-15-36”, and is known as the “CAS Latency” (CL). The lower the CAS Latency, the faster the RAM can access data. Timing is important when you are looking to overclock the system, the lower the timings the better performance you will get.
Error Correction and Data Protection Features
“Error Correction and Data Protection” refers to the features built into the 753222-201 HPE 32GB 2133mhz DDR4 SDRAM Ecc Reg Pc4-17000 Ram to ensure the integrity and accuracy of the data stored in the memory.
“Error Correction Code (ECC)” is a method of detecting and correcting errors in the data stored in the memory. ECC memory uses an algorithm to detect and correct single-bit errors, which can occur due to electrical interference or other factors. This ensures that the data stored in the memory is accurate and can be relied upon.
“Registered” or “Buffered” memory, identified by the “Reg” in the product name, uses a register between the memory controller and the DRAM chips to buffer the data being written to or read from memory. This improves the signal integrity and can help prevent data corruption in high-performance computing environments.
“Parity” is a method of detecting and correcting errors in data storage using an additional bit called a parity bit. The parity bit is used to check for errors in the data storage.
Installation and Setup Guide
An “Installation and Setup Guide” for the 753222-201 HPE 32GB 2133mhz DDR4 SDRAM Ecc Reg Pc4-17000 Ram is a document that provides instructions on how to install and set up the RAM in a computer system.
The guide typically includes step-by-step instructions on how to physically install the RAM in the computer’s memory slots, as well as any necessary configuration settings in the computer’s BIOS or UEFI firmware. It may also include information on how to test the RAM to ensure it is working properly and troubleshooting steps in case of any issues.
The guide may also include information about the compatibility of the RAM with different types of computer systems and motherboards, as well as any additional tools or equipment that may be required for the installation.
It’s important to consult the guide and follow the instructions carefully to ensure that the RAM is installed correctly and to avoid any potential damage to the computer or the memory module.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: 753222-201
- Type: Memory (RAM)
- Sub-Type: PC4-17000
- Product Name: 64GB DDR4 SDRAM Memory Module
Technical Information
- Memory Size: 32GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 32GB
- Chip Organization: X4
- Memory Speed: 2133 MHZ
- Memory Standard: DDR4-2133/PC4-17000
- Signal Processing: Registered
- Error Checking: ECC
- Cas Latency: Cl15
- Pin Count: 288-Pin
- Voltage: 1.2v
- Form Factor: Rdimm
Compatibility
- HPE Proliant Bl460c Gen9
- HPE Proliant Dl380 Gen9
- HPE Proliant Dl380p Gen9
