Description
Capacity of 7.2K RPM Hard Disk
Installation and Setup
The 834031-K21 HPE 8TB 7.2K RPM SAS 12GBPS DS Internal Hard Disk is easy to install and set up. The process involves physically installing the hard disk into the computer’s internal drive bay, and then configuring the computer to recognize and use the new hard disk.
Here are the general steps for installing and setting up the hard disk:
- Power off the computer and disconnect all cables.
- Open the computer’s case and locate the drive bay where the hard disk will be installed.
- Carefully slide the hard disk into the drive bay, making sure to align the connectors correctly.
- Secure the hard disk in place with screws or other mounting hardware.
- Connect the SAS cable and power cable to the hard disk.
- Close the computer’s case and power on the computer.
- Boot the computer into the operating system.
- Go to the computer’s BIOS or UEFI settings and set the hard disk as the primary boot device.
- Boot the computer into the operating system again.
- Use the operating system’s built-in disk management tools to format the hard disk and create partitions if needed.
Rotational Speed
The 834031-K21 HPE 8TB 7.2K RPM SAS 12GBPS DS Internal Hard Disk has a rotational speed of 7.2K RPM (Revolutions per Minute). This refers to the speed at which the disk spins, and it is an important factor in determining the hard disk’s performance and data transfer speed. The higher the RPM, the faster the data transfer rate.
7.2K RPM is considered a standard speed for hard disks and provides a balance between data transfer speed and power consumption. This speed is suitable for most applications, such as data archiving, backup, virtualization, and big data analytics. It allows for fast data access and transfer, making it an efficient option for users who require fast data transfer.
Additionally, this hard disk has a 12GBps data transfer rate, which is a high-speed data transfer protocol that enables fast data transfer between the hard disk and the computer. This ensures that users can access and transfer large amounts of data quickly, making it an ideal option for users who require fast and efficient data transfer.
Product Information:
- Manufacture: HPE
- MPN: 834031-K21
- Type: Hard Drive – Midline
- HDD Type: SAS 12GBPS
- Spare Part Number: 834132-001
- Model Number: MB8000JFECQ
- Assembly Number: 819199-001
- HPE GPN: 819205-002
- SKU: 834031-K21
Technical Information
- Capacity: 8 TB
- Form Factor: 3.5 inch LFF Low Profile
- Interface: SAS 12GBPS
- Bytes per Sector: 512
- Drive Technology (Fill): Air
- Format Type: 512e
- Carrier Type: Low Profile Carrier (LPC)
- Plug Type: Hot Plug
- Workload Type: Midline
- Features: Advanced format 512e, Digitally Signed Firmware
- Bundled with: HPE Low Profile Carrier
Dimension and Weight
- Width : 4 Inch
- Depth : 5.8 Inch
- Height : 1 Inch
- Weight : 1.52 Lbs
Environmental Parameters
- Min Operating Temperature: 50 °F
- Max Operating Temperature: 95 °F
Compatibility
- HPE ProLiant ML Series: ML110 Gen10 (3.5 inch), ML110 Gen10 Performance (3.5 inch), ML110 Gen10 Solution (3.5 inch),
- ML350 Gen10 (3.5 inch), ML350 Gen10 Base (3.5 inch), ML350 Gen10 Entry (3.5 inch), ML350 Gen10 Performance (3.5 inch),
- ML350 Gen10 Solution (3.5 inch), ML350 Gen10 Sub-Entry (3.5 inch)
- HPE ProLiant XL Series: XL450 Gen10 (3.5 inch)
