Description
Introduction to Pc4-21300 CL19 Ecc Reg DDR4 288-Pin Ram
- Capacity and Speed of Pc4-21300 CL19 Ecc Reg DDR4 288-Pin Ram
- Memory Standard: DDR4 and Form Factor: 288-pin DIMM
- Latency and Timing of Pc4-21300 CL19 Ecc Reg DDR4 288-Pin Ram
- Error Correction Code (ECC) and its benefits
- Compatibility and Interoperability with servers and motherboards
- Operating Temperature and Humidity Range
- Power Consumption and Thermal Design of Pc4-21300 CL19 Ecc Reg DDR4 288-Pin Ram
- MTBF and Reliability of Pc4-21300 CL19 Ecc Reg DDR4 288-Pin Ram
- The importance of CL (CAS Latency) and its impact on performance
- Comparison with non-ECC DDR4 memory
- Best practices for installation and configuration
- The role of memory in overall system performance
- The impact of memory on virtualization and cloud computing
- Future developments and advancements in DDR4 memory technology
- Frequently asked questions about Pc4-21300 CL19 Ecc Reg DDR4 288-Pin Ram.
Capacity and Speed of Pc4-21300 CL19 Ecc Reg DDR4 288-Pin Ram
Capacity and speed are two of the most important specifications of any memory module, including Pc4-21300 CL19 Ecc Reg DDR4 288-pin Ram. Capacity refers to the amount of memory on the module, measured in gigabytes (GB). Speed, on the other hand, refers to the data transfer rate of the memory, measured in megahertz (MHz) or gigahertz (GHz). Pc4-21300 CL19 Ecc Reg DDR4 288-pin Ram has a capacity of 32GB and a speed of 2666MHz. This means that the module has 32GB of memory and can transfer data at a rate of 2666 million times per second. These high capacity and speed ratings make Pc4-21300 CL19 Ecc Reg DDR4 288-pin Ram ideal for use in high-performance applications that require a lot of memory and fast data transfer rates.
Memory Standard: DDR4 and Form Factor: 288-pin DIMM
DDR4 (Double Data Rate 4) is a type of memory standard that is used in modern computer systems. It offers higher performance and improved power efficiency compared to its predecessor, DDR3.
A 288-pin DIMM (Dual In-line Memory Module) is a type of form factor that is used for DDR4 memory. It is a long, rectangular module that has 288 connector pins on the bottom, which connect to the memory slots on a motherboard. 288-pin DIMMs are commonly used in desktop computers and servers.
Compatibility and Interoperability with Servers
DDR4 memory is compatible and interoperable with servers that have been designed to support this memory standard. It is important to check the specifications of a server to ensure that it is compatible with DDR4 memory before purchasing or upgrading. Some servers may support both DDR3 and DDR4 memory, while others may only support one or the other.
When installing DDR4 memory in a server, it is important to use memory modules that have been tested and are certified for use in that specific server model. This will ensure that the memory is compatible and will work properly. It is also important to use memory modules that have been manufactured by a reputable vendor, as using counterfeit or low-quality memory modules can cause compatibility issues and may even damage the server.
It’s important to check the maximum speed and maximum capacity supported by the server, using memory modules beyond the maximum limit can cause issues. It’s also important to check the number of memory banks and the number of DIMM slots in the server.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: 840758-C9S
- Type: Memory (RAM)
- Sub-Type: PC4-21300
- Product Name: 32GB DDR4 SDRAM Memory Module
Technical Information
- Storage Capacity: 32GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 32GB
- Bus Speed: 2666mhz DDR4-21300/PC4-2666v
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl19
- Rank Features: 2rx4
Designed For
- HPE Convergedsystem 500, Proliant Bl460c Gen10, Dl360 Gen10, Dl380 Gen10, Dl560 Gen10, Ml350 Gen10, Xl230k Gen10, Synergy 480 Gen10, 660 Gen10
