Description
Compatibility and Installation
The HPE 846788-B21 is a 1.6TB Solid State Drive (SSD) that utilizes the SATA-6Gbps interface and has a Large Form Factor (LFF) of 3.5 inches. It is designed for mixed use, meaning it can be used for both read-intensive and write-intensive workloads.
In terms of compatibility, the HPE 846788-B21 is compatible with HPE ProLiant Gen8 and Gen9 servers and storage systems that have a LFF 3.5-inch drive bay and support SATA-6Gbps interface. It is important to check the specific requirements and compatibility of your system before purchasing this drive.
Installation of the HPE 846788-B21 is straightforward, as it is a hot-swap drive, which means it can be easily installed or replaced without having to power down the system. However, it’s always recommended to refer to the manufacturer’s documentation or guidelines for detailed instructions on how to properly install the drive.
In terms of performance, it is similar to other SATA drives, yet it is a little bit slower than SAS or NVMe drives. However, it could still be a great option for budget-conscious or legacy systems that only support SATA interface.
Data Storage Technology
846788-B21 HPE 1.6TB SATA-6GBPS Mixed Use LFF 3.5 inch LPC SSD is a type of solid state drive (SSD) that uses NAND flash memory technology to store data. NAND flash memory is a type of non-volatile memory that retains data even when the power is turned off.
Unlike traditional hard disk drives (HDDs), which use spinning disks to read and write data, SSDs use NAND flash memory to store data electronically. This allows them to access data much faster than HDDs, which can improve the performance of the device they are installed in.
The SATA-6GBPS in the product name refers to the interface that the SSD uses to connect to the host device. SATA (Serial ATA) is a standard interface for connecting storage devices to a computer. The 6GBPS refers to the maximum data transfer speed of the interface, which is 6 gigabytes per second.
Mixed Use LFF 3.5 inch LPC SSD is a type of SSD that is designed for use in a wide range of applications, including data center, enterprise, and consumer. LFF stands for Large Form Factor, which means it is designed for use in larger systems such as servers or desktops. LPC stands for low profile card, which means it is designed to fit into a smaller space.
Conclusion and Recommendations
The HPE 846788-B21 is a 1.6TB 3.5-inch Large Form Factor (LFF) SATA-6 Gbps Solid State Drive (SSD) designed for mixed-use workloads. It is a cost-effective storage solution that offers high capacity and good performance for applications that don’t require the high IOPS and throughput of SAS or NVMe SSDs.
One of the main benefits of this drive is its high storage capacity, which allows it to store large amount of data. Additionally, the drive’s low power consumption and low heat dissipation make it an energy efficient storage solution.
The drive’s hot-swap capability allows for easy maintenance and replacement of the drive without any downtime. The drive’s Smart Carrier technology allows it to communicate with the host system to report its health status and other important information, which can help to monitor the drive’s health status and take action if any issues are detected.
General Information
- Manufacturer: Hewlett Packard Enterprise (HPE)
- MPN : 846788-B21
- Type : Solid State Drive (SSD)
- Sub Type : SATA-6GBPS
- SKU : 846788-B21
Technical Information
- Capacity : 1.6 TB
- Form Factor : 3.5inch Lff Low Profile
- Connectivity : Single-Port
- Hot Pluggable : Yes
- Data Transfer Rate : 600 MBPS
Desingned
- Apollo 4510 Gen9 (3.5inch)
- 4530 (3.5inch)
- Proliant Xl170r Gen9 (3.5inch)
Dimensions & Weight
- Height: 5.63 Inch
- Width: 3.75 Inch
- Depth: 7.00 Inch
- Weight: 1.35 Lbs
