Description
Energy Efficiency and Power Consumption
The 857650-H21 HPE 10TB hard drive is designed to be energy efficient, which means that it consumes less power than traditional hard drives. This is achieved through various techniques such as optimizing the firmware and reducing the power requirements of the drive components. As a result, it helps to reduce the overall power consumption of the system, which can lead to cost savings on electricity bills.
The power consumption of the 857650-H21 hard drive is relatively low, with an average power consumption of 9 watts during read/write operations and 7.6 watts during idle mode. This makes it an ideal choice for environments that require a high level of storage capacity without compromising on energy efficiency.
In addition, the hard drive supports the SATA-6GBPS interface, which helps to optimize the data transfer rate and reduce the power consumption during data transfer. It also features advanced power management features such as idle power-down mode, which helps to further reduce power consumption when the hard drive is not in use.
Data Transfer Speeds
The 857650-H21 HPE 10TB 7.2K RPM 3.5Inch DS SATA-6GBPS SC Midline G9 G10 Hard Drive supports a data transfer speed of 6Gbps, which is the maximum theoretical speed of SATA III interface. However, the actual data transfer speed may vary depending on various factors such as the system configuration, the type of files being transferred, and the overall system performance.
The 7.2K RPM (rotations per minute) speed indicates the rotation speed of the hard drive platter. The higher the RPM, the faster the data access speed. The 857650-H21 HPE hard drive is designed with a 7.2K RPM speed, which provides a fast data transfer rate and quick access to data.
In addition, the 857650-H21 HPE hard drive supports the DS (dual-ported SAS) interface, which provides high-speed data transfer rates and increased reliability. DS interface enables two independent paths between the hard drive and the host, allowing for faster data access and redundancy in case of failure.
Data Security and Encryption
The 857650-H21 HPE hard drive offers advanced data security features, including encryption and secure erase capabilities. It uses industry-standard AES 256-bit encryption to protect sensitive data from unauthorized access, theft, and data breaches. The encryption process is transparent and does not affect the performance of the hard drive.
In addition to encryption, the hard drive also supports secure erase functionality, which allows users to permanently erase all data on the drive, making it impossible to recover even with data recovery tools. This feature is especially useful when disposing of the hard drive or when transferring it to a different user.
The hard drive also supports TCG-Opal 2.0, which is a security specification that provides a standardized approach for managing self-encrypting drives (SEDs). TCG-Opal 2.0 enables system administrators to manage and secure the hard drive using a centralized management console.
General Information
- Manufacturer Name : HPE
- MPN: 857650-H21
- Type: Internal Hard Drive
- SSD Type: SATA 6 GBPS
- SKU: 857650-H21
- Spare Part Number: 857968-001
- Model Number: MB010000GWAYN
- Assembly Number: 857643-002
- HPE GPN: 857653-002
Technical Information
- Device Type: Hard Drive – Hot-Swap
- Capacity: 10 TB
- Form Factor: 3.5 inch LFF
- Interface: SATA 6Gbps
- Bytes per Sector: 512
- Drive Technology (Fill): Helium
- Plug Type: Hot Plug
- Format Type: 512e
- Carrier Type: Low Profile Carrier
- Workload: Midline
- Features: Advanced format 512e, Digitally Signed Firmware
- Bundled with: HPE Low Profile Carrier
Performance
- Rotational Speed: 7200 RPM
- Transfer Rate Synchronous (Max): 6Gb/sec
- Single Track Seek Time: 0.22 ms
- Average Seek Time: 8.00 ms
- Full Stroke Seek Time: 16.00 ms
Expansion & Connectivity
- Interfaces: 1 x SATA 6 Gb/s – 7 pin Serial ATA
- Compatible Bay: 3.5″ LFF Low Profile
Environmental Parameters
- Min Operating Temperature: 50 °F (10°C)
- Max Operating Temperature: 95 °F (35°C)
Dimensions and Weight
- Width : 4 Inch
- Depth : 5.8 Inch
- Height : 1 Inch
- Weight : 1.52 Lbs
Compatibility Information
- HPE Apollo: 4200 Gen9 (3.5 inch), 4510 Gen9 (3.5 inch), 4520 Gen9 (3.5 inch) and 4530 (3.5 inch) Servers
- HPE ProLiant ML Series: ML110 Gen10 (3.5 inch), ML110 Gen10 Performance (3.5 inch), ML110 Gen10 Solution (3.5 inch), ML350 Gen10 (3.5 inch), ML350 Gen10 Base (3.5 inch), ML350 Gen10 Entry (3.5 inch), ML350 Gen10 Performance (3.5 inch), ML350 Gen10 Solution (3.5 inch), ML350 Gen10 Sub-Entry (3.5 inch) Servers
