Description
Compatibility
of the HPE 861110-001 32GB PC4-19200 ECC 2400MHz RAM with Different Servers and Motherboards
The HPE 861110-001 32GB PC4-19200 ECC 2400MHz RAM is specifically designed for use in HPE ProLiant DL360 Gen10, DL380 Gen10, DL385 Gen10, DL560 Gen10, and DL580 Gen10 servers. This ensures optimal performance and compatibility with these systems.
However, it is also compatible with other servers and motherboards that support DDR4 ECC memory. It is important to check the specifications of the server or motherboard to ensure that it supports DDR4 ECC memory with a speed of 2400MHz and a 288-pin DIMM form factor before purchasing the HPE 861110-001 32GB RAM. It’s also important to check the maximum capacity of the memory the board could support.
It is also important to note that the compatibility may vary depending on the specific revision of the product and the firmware version of the server or motherboard. It is always recommended to check the manufacturer’s website or consult with their technical support to ensure compatibility before purchasing.
Installation guide for the HPE 861110-001 32GB PC4-19200 ECC 2400MHz
RAM
Installing the HPE 861110-001 32GB PC4-19200 ECC 2400MHz RAM into a server or motherboard is a relatively simple process, but it is important to take proper precautions to prevent damage to the memory module or the system.
Here is a general guide for installing the HPE 861110-001 32GB RAM:
- Before installing the RAM, make sure that the system is powered off and unplugged from the power source. Remove the system cover to access the memory slots.
- Locate the memory slots on the motherboard. These are typically located near the CPU and are labeled as DIMM slots.
- Carefully align the notches on the memory module with the notches on the memory slot. Gently press down on the module until it is fully seated in the slot.
- Repeat the process for any additional memory modules that you are installing.
- Replace the system cover and reconnect the power source.
- Power on the system and enter the BIOS or UEFI setup to verify that the system recognizes the new memory.
- Check the memory configuration in the system and make sure that the new memory is being used and is running at the correct speed.
It is important to consult the server or motherboard’s manual for detailed instructions, as the process may vary depending on the specific make and model of the system.
It is also important to note that installing memory on a server that is running a virtual environment may require a reboot of the virtual machines, in order to recognize the new memory.
Benefits of using ECC Memory in Servers
Using Error Correcting Code (ECC) memory in servers provides several benefits, such as:
- Data Integrity: ECC memory can detect and correct single-bit errors in memory, which can occur due to a variety of factors such as electromagnetic interference or cosmic rays. This helps to ensure the integrity of the data stored in memory.
- Improved Reliability: ECC memory is more reliable than non-ECC memory because it can detect and correct memory errors, reducing the likelihood of system crashes or data corruption.
- Error Detection: ECC memory can detect multiple-bit errors, which non-ECC memory cannot detect. This allows for early detection of potential memory issues and can help to prevent data loss or system crashes.
- High-Availability: ECC memory is commonly used in High-Availability systems because it can detect and correct memory errors in real-time, which can help to prevent downtime and ensure that mission-critical applications are running smoothly.
- Better Performance: ECC memory can improve system performance by providing a higher level of memory protection and by reducing the need for frequent memory replacement.
- Compliance: Some industries and government regulations require the use of ECC memory in servers and other critical systems to ensure data integrity and to prevent data breaches.
It is important to note that ECC memory is slightly more expensive than non-ECC memory, but the benefits of ECC memory in servers, especially in terms of data integrity, high-availability and compliance, make it a worthwhile investment for many businesses and organizations.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: 861110-001
- Type: Memory (RAM)
- Sub-Type: PC4-19200
- Product Name: 32GB DDR4 SDRAM Memory Module
Technical Information
- Storage Capacity: 32GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 32GB
- Bus Speed: 2400MHZ DDR4-2400/PC4-19200
- Data Integrity Check: ECC
- Signal Processing: Registered
- CAS Latency Timings: Cl17
- Features: 2rx4
Compatibility
- Apollo 2000/Apollo 4200/Apollo 45
- 00/Apollo 8000/Bl460c Gen9
- Dl60 Gen9/Dl80 Gen9/Dl120 Gen9/Dl160 Gen9/Dl180 Gen9
- Dl360 Gen9/Dl380 Gen9/Dl388 Gen9(Bto)/Ml110 Gen9
- Ml150 Gen9/Ml350 Gen9/
- Synergy 480 Gen9
