Description
Compatibility and Installation
The HPE 868822-K21 is a 2.5-inch solid state drive (SSD) that is compatible with a wide range of systems and devices that have a SATA 6GB/s interface. This includes servers, workstations, and other enterprise-level equipment that use the 2.5-inch form factor. The drive can be installed in a standard 2.5-inch drive bay and connected to the host system using a SATA cable.
In terms of compatibility, the drive is designed to be compatible with a wide range of operating systems and file systems, including Windows, Linux, and macOS. Additionally, the drive is compliant with various security and data protection standards, making it suitable for use cases where data security and protection are of paramount importance.
The installation process of the drive is simple and straightforward. You will need a screwdriver to install the drive in the 2.5-inch drive bay. Once the drive is secured in place, connect the SATA cable to the drive and the host system. You may need to configure the drive in the system’s BIOS or UEFI firmware before it can be used.
Technical Specs & Performance
The HPE 868822-K21 is a 960GB solid-state drive (SSD) that uses the Serial ATA (SATA) interface with a 6 Gbps data transfer rate. It has a form factor of 2.5 inches, making it compatible with small form factor (SFF) drive bays.
The drive’s technical specifications include:
- Sequential read speed: Up to 540MB/s
- Sequential write speed: Up to 480MB/s
- Random read speed: Up to 90,000 IOPS
- Random write speed: Up to 25,000 IOPS
- Endurance: Up to 1.5 PBW (petabytes written)
- MTBF (Mean Time Between Failures): 2 million hours
In terms of performance, the HPE 868822-K21 is designed for read-intensive workloads, which means it is optimized for tasks that involve a large amount of data reading and relatively less data writing. As such, its sequential read speed and random read speed are significantly higher than its write speed.
The drive is also equipped with features such as power management and data compression, which can help to optimize storage efficiency.
Maintenance and Troubleshooting
The 868822-K21 HPE 960GB SATA 6GBPS SC Read Intensive 2.5 Inch SFF SSD is a reliable storage device, but like any other hardware, it may require some maintenance and troubleshooting. Here are a few things to keep in mind:
- Firmware updates: The drive’s firmware controls its basic functionality and can be updated to fix bugs or improve performance. These updates can be obtained from the manufacturer’s website and should be installed according to the instructions provided.
- Monitoring the drive’s health: The drive’s health can be monitored using software tools provided by the manufacturer or third-party tools. These tools can provide information on the drive’s temperature, remaining lifespan, and other important parameters. Any issues that are identified should be addressed as soon as possible to prevent data loss or other problems.
- Data backup: Regularly backing up important data is essential to ensure that it can be recovered in the event of a drive failure. This can be done using backup software or by copying files to another storage device.
- Regular cleaning: Dust accumulation can cause the drive to overheat, so it is important to keep it clean. Use a soft, dry cloth to wipe the drive, and ensure that the ventilation holes on the drive are not blocked.
- Check the compatibility: Before installing the drive, check the compatibility of the drive with the system, controller, and operating system to ensure proper operation.
- Check the power supply: Check the power supply to the drive and ensure that it is stable, as power fluctuations can cause damage to the drive.
General Information
- Manufacturer: HPE
- MPN: 868822-K21
- Type : Solid State Drive
- SSD Type: SATA 6GBPS
- SKU: 868822-K21
Technical Information
- Storage Capacity: 960 GB
Interfaces / Ports
- Drive Interface: SATA
- Drive Interface Standard: SATA/6000
Performance
- Endurance DWPD: 0.8
- Drive Transfer Rate: 6 Gb/sec (external)
- Internal Data Rate: 530 MBps (read) / 490 MBps (write)
- Random Write IOPS (4KiB, Q=16): 24500
- Max Random Write IOPS (4KiB): 24500@Q4
- Random Read IOPS (4KiB, Q=16): 64000
- Max Random Read IOPS (4KiB): 75500@Q32
Expansion & Connectivity
- Interfaces: 1 x SATA 6 GB/s
- Compatible Bay: 2.5 Inch SFF
Power
- Power Consumption: 9 Watt
Miscellaneous
- Device Supported: Server
Dimensions & Weight
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs
