Description
Comparison with Solid State Drives
The HPE 800GB SAS 12GBPS 2.5 Inch SFF Mixed Use TLC SC SSD (part number 872376-X21) is a solid-state drive (SSD) designed for use in Hewlett Packard Enterprise (HPE) server systems. The drive features a SAS interface, which provides high-speed data transfer, and a 12 Gbps data transfer rate, which is faster than many other SSDs on the market. It uses TLC (Triple-Level Cell) NAND flash memory, which provides a balance of cost and performance. The “Mixed Use” designation indicates that the drive is intended for a combination of read-intensive and write-intensive workloads.
Compared to other solid-state drives, the HPE 800GB SAS 12GBPS 2.5 Inch SFF Mixed Use TLC SC SSD offers several advantages, including faster data transfer rates, increased storage capacity, improved reliability, and lower power consumption. However, other SSDs may offer different features and performance characteristics, so it is important to carefully compare the specifications of the HPE SSD with other drives before making a purchasing decision.
Advantages of Solid State Drives
Solid state drives (SSDs) have several advantages over traditional hard disk drives (HDDs), including:
- Speed: SSDs have much faster read and write speeds compared to HDDs, which can result in improved system performance and faster data access times.
- Reliability: SSDs have no moving parts, which makes them less susceptible to physical damage and more reliable in general.
- Energy Efficiency: SSDs consume less power compared to HDDs, which can result in longer battery life for laptops and lower energy consumption in data centers and other large-scale storage environments.
- Endurance: SSDs have a higher endurance limit compared to HDDs, which means they can handle more write operations over their lifetime.
- Noise: Since SSDs have no moving parts, they produce no noise, which makes them a good choice for use in environments where noise is a concern.
- Form Factor: SSDs are available in a range of form factors, including 2.5-inch SFF drives like the HPE 872376-X21 800GB SAS-12GB/s SSD, which can help simplify the installation and upgrade process in some systems.
- Increased Capacity: As storage technology continues to advance, the capacity of SSDs is increasing, making it possible to store more data on a single drive.
Maintenance and Troubleshooting
The maintenance and troubleshooting of the HPE 872376-X21 800GB SAS 12GBPS 2.5 Inch SFF Mixed Use TLC SC SSD can be performed using the following steps:
- Regular Firmware Updates: Keep the firmware of the drive up-to-date to ensure that it performs optimally and fix any known issues.
- Monitor Drive Health: Use HPE’s System Management tools, such as the HPE Integrated Lights-Out (iLO) or the HPE Smart Storage Administrator (HPE SSA), to monitor the health of the drive and to check for any errors.
- Check for Disk Errors: Use disk checking utilities, such as the chkdsk command in Windows or the fsck command in Linux, to identify and fix any disk errors that may arise.
- Check for Drive Connectivity Issues: Ensure that the drive is securely connected to the server and that the cables are working properly.
- Replace the Drive if Necessary: In the event of a drive failure, replace the drive with a new one using the hot-swap feature of the drive.
- Consult HPE Support: If the issue cannot be resolved through the above steps, contact HPE Support for further assistance.
General Information
- MPN: 872376-X21
- Manufacturer: Hewlett Packard Enterprise (HPE)
- Type: Hot Swap Solid State Drive (SSD)
- SSD Type: SAS 12GBPS
- Spare Part Number: 872506-001
- Model Number: MO000800JWFWP
- Assembly Number: 872373-002
- SKU: 872376-X21
Technical Information
- Device Capacity: 800 GB
- Form Factor: 2.5 Inch SFF
- NAND Flash Memory Type: Multi-Level Cell (MLC)
- Plug Type: Hot Plug
- Carrier Type: Smart Carrier (SC)
- Workload Type: Mixed-Use
- Features: Digitally Signed Firmware (DS)
- Bundled With: HPE Smart Drive Carrier
Dimension and Weight
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs
Drive Performance
- Drive Transfer Rate: 12 GB/Sec (External)
- Lifetime Writes (TB): 4380
- Endurance DWPD: 3.0
- MAX Seq Reads: 1075
- Max Seq Writes: 1025
- Throughput Random Read Avg. Latency uSec: 126
- Throughput Random Write Avg. Latency uSec: 57
- Random Read IOPS (4KiB, Q=16): 120000
- Random Writes IOPS (4KiB, Q=16): 90000
- MAX Random Read IOPS (4KiB): 185000@Q32
- MAX Random Write IOPS (4KiB): 90000@Q16
- 4KiB Random 70% Read / 30% Write, Queue 32 Performance (IOPS) VI-1: 107000
- 4KiB Random 50% Read / 50% Write, Queue 32 Performance (IOPS) VI-2: 92500
Power Requirement
- Power Idle Time: 3.06 Watt
- Power Random Read: 4.07 Watt
- Power Random Write: 4.07 Watt
- Power Sequential Read: 6.28 Watt
- Power Sequential Write: 8.22 Watt
- Power Random R/W: 4.07 Watt
Compatibility
- HPE ProLiant DL Series: DL160 Gen9 (3.5 Inch), DL160 Gen9 Base (3.5 Inch), DL160 Gen9 Entry (3.5 Inch), DL160 Gen9 Performance (3.5 Inch), DL20 Gen9 Solution (2.5 Inch), DL360 Gen10 (2.5 Inch), DL360 Gen10 Base (2.5 Inch), DL360 Gen10 Entry (2.5 Inch), DL360 Gen10 High Performance (2.5 Inch), DL360 Gen10 Low (2.5 Inch), DL360 Gen10 Performance (2.5 Inch), DL360 Gen10 Solution (2.5 Inch), DL385 Gen10 (2.5 Inch), DL385 Gen10 Base (2.5 Inch), DL385 Gen10 Entry (2.5 Inch), DL385 Gen10 High-Performance (2.5 Inch), DL385 Gen10 Performance (2.5 Inch), DL385 Gen10 Solution (2.5 Inch), DL560 Gen10 (2.5 Inch), DL560 Gen10 Base (2.5 Inch), DL560 Gen10 Entry (2.5 Inch), DL560 Gen10 Performance (2.5 Inch), DL580 Gen10 (2.5 Inch), DL580 Gen10 Base (2.5 Inch), DL580 Gen10 Entry (2.5 Inch), DL580 Gen10 Performance (2.5 Inch), DL580 Gen9 (3.5 Inch), DL580 Gen9 Base (3.5 Inch), DL580 Gen9 Database (3.5 Inch), DL580 Gen9 High Performance (3.5 Inch), DL580 Gen9 SAP HANA Scale-up Base Configuration (3.5 Inch) Servers
- HPE ProLiant ML Series: ML110 Gen10 Solution (2.5 Inch), ML110 Gen9 (3.5 Inch), ML110 Gen9 Base (3.5 Inch), ML110 Gen9 Entry (3.5 Inch), ML350 Gen10 (2.5 Inch), ML350 Gen10 Base (2.5 Inch), ML350 Gen10 Entry (2.5 Inch), ML350 Gen10 Performance (2.5 Inch), ML350 Gen10 Solution (2.5 Inch), ML350 Gen10 Sub-Entry (2.5 Inch) Servers
- HPE ProLiant XL Series: XL170R Gen9 (3.5 Inch), XL450 Gen10 (2.5 Inch) Servers
