Description
Introduction to the HPE 900GB SAS Hard Drive
The HPE 900GB SAS (Serial Attached SCSI) hard drive is a high-performance, enterprise-class storage device designed for use in data centers and other demanding environments. It has a capacity of 900GB, which is suitable for storing large amounts of critical data, including databases, applications, and virtualized environments.
The SAS interface is the preferred choice for enterprise-class storage because it offers faster data transfer rates and greater reliability than SATA (Serial ATA) drives. The 6Gbps transfer rate of the HPE 900GB SAS hard drive allows for fast data access and retrieval, which is critical for mission-critical applications.
The hard drive is designed for use with HPE servers and storage systems, ensuring seamless integration and optimal performance. It features advanced reliability and data integrity features, such as error correction and detection, which help to prevent data loss and corruption.
Installation and configuration of the HPE 900GB SAS hard drive is straightforward, and it supports a variety of RAID configurations for enhanced data protection and redundancy. The hard drive is also energy-efficient, which helps to reduce power consumption and cooling costs in the data center.
Capacity and Form Factor of the Hard Disk
The HPE 900GB SAS hard disk has a storage capacity of 900GB, which is a significant amount of space for storing data-intensive applications, such as databases and virtualized environments. This makes it ideal for use in enterprise-class environments where large amounts of critical data need to be stored and accessed quickly.
The form factor of the HPE 900GB SAS hard disk is SFF (Small Form Factor), which means it is physically smaller than traditional 3.5-inch hard disks. The SFF form factor allows for greater storage density, which means more drives can be installed in a given space, making it ideal for data centers and other environments where space is at a premium.
The dimensions of the HPE 900GB SAS hard disk are 2.5 inches in width, 0.6 inches in height, and 3.95 inches in depth, which is significantly smaller than traditional 3.5-inch hard disks. The smaller size and form factor of the HPE 900GB SAS hard disk make it an ideal solution for use in blade servers and other environments where space is limited.
The HPE 900GB SAS hard disk is also hot-swappable, which means it can be replaced or added without shutting down the server or storage system. This feature helps to ensure minimal downtime and maximum availability of critical data.
Power and Cooling Requirements
Power and cooling requirements refer to the amount of electrical power and cooling necessary for the proper functioning of the HPE 900GB SAS Enterprise Hard Drive.
In terms of power, the hard drive requires a specific amount of electrical power to operate and perform its functions. This power consumption may vary depending on the workload and usage patterns of the hard drive. It is important to ensure that the system has enough power capacity to support the hard drive and any other connected components.
Cooling is also an essential requirement for the HPE 900GB SAS Enterprise Hard Drive. The hard drive generates heat during operation, and if not dissipated effectively, this heat can lead to performance degradation, data loss, or hardware failure. Therefore, the hard drive requires a cooling mechanism to maintain a safe operating temperature.
The cooling mechanism can be achieved through various methods, including fans, heat sinks, or liquid cooling systems. The cooling solution must be sufficient to maintain the hard drive’s temperature within the recommended range, which is typically specified by the manufacturer.
Detail Description
- Brand Name: HPE
- MPN: EG0900FCHHV
- Option Part Number: 619291-B21
- Spare Part Number: 619463-001
- Assembly Number: 666355-004
- HPE GPN: 507129-018
- Type: Hard Drive
- Capacity: 900GB
- Form Factor: 2.5inch SFF
- Bytes per Sector: 512
- Bundled with: HPE Standard Carrier
- SKU: EG0900FCHHV
Performance
- Spindle Speed: 10000 RPM
- External Data Transfer Rate: 6 GB/SEC
- Seek Time: 3.57 ms (average) / 7.3 MS (max)
- Track-to-Track Seek Time: 0.21 MS
Dimension and Weight
- Width : 2.8 Inch
- Depth : 3.9 Inch
- Height : 0.6 Inch
- Weight :0.50 Lbs
Environmental Parameters
- Min Operating Temperature: 50 °F
- Max Operating Temperature: 95 °F
Compatibility Information
- HPE ProLiant BL Series: BL20p (G4) BL45p (G2) BL460c (G6 G7) BL465c (G1 G5 G6 G7) BL480c (BL620c G7) BL680c (G5 G6 G7) BL685c (G6 G7)
- HPE ProLiant DL Series: DL1000 DL120 (G6 G7) DL160 (G6 G7) DL160se (G6 G7) DL165 (G6 G7) DL170e (G6 G7) DL170h (G6 G7) DL180 (G6 G7) DL320 (G6 G7) DL360 (G4p G5 G6 G7) DL365 (G1 G5 G6 G7) DL370 (G6 G7) DL380 (G4 G5 G6 G7) DL385 (G1 G2 G3 G4 G5/G5p G6 G7) DL580 (G3 G4 G5 G6 G7) DL585 (G2 G3 G4 G6 G7) DL785 (G6)
- ProLiant ML Series: ML110 (G7) ML350 (G5 G6 G7) ML370 (G5 G6 G7) ML570 (G3 G4 G5)
- HPE ProLiant SL Series: SL390s (G6 G7)
- HPE ProLiant WS Series: WS460c (G6 G7)
- HPE Storage arrays: D2700 MSA 1040 MSA70 P2000 (G3) X1500 (G2) X16000 (G2) X1800 (G2) X3400 (G2) X3800 (G2) 2000i (G2) 2000sa (G2)
