Description
Technical Specifications of this Transceiver
The J4858-69001 is a Mini-GBIC (Gigabit Interface Converter) transceiver module manufactured by Hewlett Packard Enterprise (HPE) for use in their Procurve networking equipment. This specific transceiver is designed to support Gigabit Ethernet (1000Base-SX) standards, which allows for data transmission at up to 1 Gbps over multimode fiber optic cables.
The technical specifications of the J4858-69001 HPE Procurve Gigabit 1000 Base Sx Mini GBIC transceiver are as follows:
- Data Transfer Rate: The transceiver supports a data transfer rate of 1 Gbps.
- Connector Type: The transceiver has an LC duplex connector for the fiber optic cable connection.
- Cable Type: The transceiver supports multimode fiber optic cables with a core size of 50/125 µm or 62.5/125 µm and a maximum cable distance of up to 550 meters.
- Wavelength: The transceiver operates at a wavelength of 850nm.
- Compatibility: The transceiver is compatible with HPE Procurve 4200vl, 2900, 2910al, 2610, 2510, 2530, 2520, and 1810 switches.
- Hot-Swappable: The transceiver is hot-swappable, meaning it can be installed or removed from a switch without the need to power down the switch.
- Power Consumption: The transceiver has a maximum power consumption of 1.0 Watt.
- Temperature Range: The transceiver can operate in a temperature range of 0°C to 70°C (32°F to 158°F).
Maintenance and Troubleshooting
J4858-69001 is a mini-GBIC transceiver module produced by Hewlett Packard Enterprise (HPE). This transceiver module is designed to support Gigabit Ethernet data rates over multimode fiber optic cables, and it is compatible with HPE ProCurve switches.
Maintenance: To maintain the J4858-69001 transceiver, it is recommended to perform regular cleaning of the fiber optic connectors to ensure that there is no dust, dirt or other contaminants that can affect the performance of the transceiver. Additionally, it is important to inspect the transceiver for any physical damage or corrosion and to replace it if any issues are found.
Troubleshooting: If the J4858-69001 transceiver is not functioning properly, here are some troubleshooting steps that can be taken:
- Verify the compatibility of the transceiver with the switch it is installed in.
- Check the fiber optic cable connections to ensure they are securely plugged in.
- Check the status LEDs on the switch to determine if the transceiver is receiving power and transmitting data.
- Use a fiber optic cable tester to verify the integrity of the fiber optic cable.
- Replace the transceiver module with a known working unit to see if the problem is resolved.
If these steps do not resolve the issue, it may be necessary to contact HPE technical support for further assistance.
Installation and Configuration Guide
J4858-69001 is a mini Gigabit Interface Converter (GBIC) module manufactured by Hewlett Packard Enterprise (HPE). It is designed to provide high-speed connectivity between network devices that support Gigabit Ethernet standards. Specifically, it operates at 1000 Base-SX speed, which is suitable for short-range transmission over multimode fiber optic cables.
The installation and configuration of the J4858-69001 GBIC module involves the following steps:
- Power off the network device: Before installing the GBIC module, power off the network device to prevent any damage to the module or the device.
- Remove the existing GBIC module (if applicable): If the network device already has a GBIC module installed, remove it by pressing the module release latch and pulling the module out of the slot.
- Insert the J4858-69001 module: Insert the J4858-69001 module into the vacant GBIC slot. Push the module gently until it clicks into place.
- Connect the fiber optic cables: Connect the multimode fiber optic cables to the module’s LC connectors.
- Power on the network device: Once the module and cables are installed, power on the network device.
- Configure the network device: Depending on the network device, it may be necessary to configure it to recognize and use the J4858-69001 module. Consult the device’s user manual or contact HPE support for specific instructions.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: J4858-69001
- Type: Networking
- Sub-Type: GBIC-SFP
- Device Type : Transceiver Module
- Form Factor : Plug-In Module
- Interface (Bus) Type : Sfp (Mini-Gbic
Networking
- Connectivity Technology : Wired
- Cabling Type : Ethernet 1000base-Sx
- Data Link Protocol : Gigabit Ethernet
- Data Transfer Rate : 1 GBPS
- Features : Full Duplex Capability
- Compliant Standards : IEEE 802.3z
Expansion / Connectivity
- Interfaces : 1 X Network – Ethernet 1000base-Sx – Lc Multi-Mode X 2
- Compatible Slots : 1 X Sfp (Mini-Gbic)
