Description
Configuration and Management Options
J4858-69201 is a Small Form-factor Pluggable (SFP) transceiver module manufactured by Hewlett Packard Enterprise (HPE) that supports Gigabit Ethernet (GbE) networks. This transceiver is designed to operate over optical fiber cables and supports full-duplex communication at a maximum data rate of 1 Gbps.
The HPE Procurve X121 transceiver module can be installed in any HPE networking device that supports SFP modules, such as switches, routers, and network interface cards (NICs). Once installed, the transceiver can be configured and managed using various methods, including:
- Web-based management: Many HPE network devices feature a web-based management interface that allows users to configure and monitor the transceiver module. This interface provides an intuitive graphical user interface (GUI) that can be accessed using a web browser.
- Command-line interface (CLI): HPE network devices also support a CLI that allows users to configure and manage the transceiver using a series of text-based commands. This method is often preferred by advanced users who are familiar with networking concepts and prefer the flexibility and granularity of command-line interfaces.
- Network management software: HPE network devices can be managed using third-party network management software, such as HP Intelligent Management Center (IMC), which provides a comprehensive set of tools for network device management, including configuration, monitoring, and troubleshooting.
- Simple Network Management Protocol (SNMP): SNMP is a protocol used for network management and monitoring. HPE network devices support SNMP and can be configured to provide SNMP traps, which are notifications sent to a management system when certain events occur, such as a link failure or high bandwidth utilization.
Performance and Scalability
J4858-69201 is a small form-factor pluggable (SFP) transceiver module designed for use with HPE ProCurve switches and other networking devices. This transceiver module supports 1 Gbps Gigabit Ethernet full-duplex communication, which means that data can be transmitted and received simultaneously at a rate of 1 gigabit per second.
The J4858-69201 transceiver module is hot-swappable, which means that it can be inserted or removed from a networking device while it is still powered on. This feature allows for easy upgrades or replacements without disrupting network operations.
In terms of performance and scalability, the J4858-69201 transceiver module is highly reliable and supports a variety of features that optimize network performance. It has a maximum cable distance of up to 10 kilometers, depending on the type of fiber optic cable used. It also supports a variety of network protocols and features, including Quality of Service (QoS), VLAN tagging, and Link Aggregation Control Protocol (LACP).
Installation and Configuration Guide
J4858-69201 is a model number for an HPE Procurve X121 Gigabit Ethernet transceiver module. This module is designed to provide high-speed network connectivity over fiber optic cables.
To install and configure the J4858-69201 transceiver module, follow these steps:
- Power down the device that the module will be installed in.
- Insert the transceiver module into an available SFP (Small Form-factor Pluggable) port on the device.
- Connect a fiber optic cable to the transceiver module. The type of cable required will depend on the distance between the devices being connected and the type of fiber optic cable being used.
- Power on the device.
- Configure the device to recognize the transceiver module. This may involve setting the port speed and duplex settings to match the specifications of the transceiver module.
- Verify that the device recognizes the transceiver module and that the link is up and running.
The specific configuration steps may vary depending on the device that the transceiver module is being installed in. Consult the device’s documentation for specific instructions on how to install and configure SFP modules.
In general, when configuring a transceiver module, it is important to ensure that the settings of the module and the device match. This includes setting the correct speed and duplex settings, as well as ensuring that any other required configuration settings are properly configured.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: J4858-69201
- Type: Networking
- Sub-Type: GBIC-SFP
- Device Type : Transceiver Module
- Form Factor : Plug-In Module
- Interface (Bus) Type : Sfp (Mini-Gbic)
Networking
- Connectivity Technology : Wired
- Cabling Type : Ethernet 1000base-Sx
- Data Link Protocol : Gigabit Ethernet
- Data Transfer Rate : 1 GBPS
- Features : Full Duplex Capability
- Compliant Standards : IEEE 802.3z
Expansion / Connectivity
- Interfaces : 1 X Network – Ethernet 1000base-Sx – Lc Multi-Mode X 2
- Compatible Slots : 1 X Sfp (Mini-Gbic)
