Description
Introduction to 600GB-15K RPM
P04695-B21 HPE 15K RPM DS SAS-12GBPS 600GB SC Enterprise Hard Drive is a high-performance storage device designed for enterprise-level applications that require fast and reliable access to large amounts of data.
The “600GB-15K RPM” specification refers to the capacity and rotational speed of the hard drive. The drive has a storage capacity of 600 gigabytes, which is a measure of the amount of data that can be stored on the drive. The 15K RPM (revolutions per minute) refers to the speed at which the hard drive’s disks spin.
A higher rotational speed generally means faster data access times, which is important for applications that require high levels of I/O (input/output) operations per second. This can include tasks such as database queries, data mining, and high-performance computing.
In addition to its high capacity and fast rotational speed, the P04695-B21 hard drive uses a SAS-12GBPS interface, which is a type of high-speed serial interface that provides fast data transfer rates between the hard drive and the host system. This interface is commonly used in enterprise-level servers and storage systems to provide high levels of performance and reliability.
Installation and Setup
Sure, here’s a general guide on how to install and set up the HPE 15K RPM DS SAS-12GBPS 600GB SC Enterprise Hard Drive (part number P04695-B21):
- Shut down the server and unplug it from the power source.
- Open the server chassis and locate an available drive bay.
- Remove the drive bay cover and insert the hard drive into the bay, making sure that it’s securely connected to the drive cage.
- Use screws to secure the drive into place.
- Close the server chassis and reconnect the power source.
- Power on the server and access the BIOS settings to verify that the hard drive is detected.
- If the hard drive is not detected, check the connections and make sure that the drive is properly installed.
- Configure the hard drive using the appropriate software, such as HPE Smart Storage Administrator (SSA) or HPE Integrated Lights Out (iLO). This will allow you to create logical drives, set up RAID configurations, and perform other necessary setup tasks.
- Once the hard drive is properly configured, you can use it for storage, backup, or other data management tasks.
Please note that the specific steps for installation and setup may vary depending on the server and software you’re using. Always refer to the manufacturer’s documentation for detailed instructions.
High Reliability
The HPE 15K RPM DS SAS-12GBPS 600GB SC Enterprise Hard Drive (part number P04695-B21) is designed for use in enterprise-level server and storage systems. It is optimized for performance and reliability, making it a suitable choice for demanding applications that require high-speed data access and storage.
One of the key factors contributing to the high reliability of this hard drive is its construction. It is built using high-quality materials and components, and is designed to withstand the stresses and strains of continuous operation in a data center environment. It features advanced error correction technologies that help ensure data integrity and reduce the risk of data loss or corruption.
Another important factor contributing to the high reliability of this hard drive is its firmware. HPE’s firmware is designed to maximize the performance and reliability of their hard drives, with features like predictive failure analysis (PFA) and self-monitoring, analysis, and reporting technology (SMART) that help identify potential issues before they become critical.
Finally, the HPE 15K RPM DS SAS-12GBPS 600GB SC Enterprise Hard Drive is rigorously tested to ensure it meets the highest standards of reliability and quality. It is subjected to a battery of tests that simulate the stresses of real-world data center environments, including temperature and humidity extremes, shock and vibration, and electrostatic discharge.
Product Information
- Manufacturer : Hewlett Packard Enterprise(HPE)
- Part Number : P04695-B21
- Type : Hard Drive (HDD)
- HDD-Type : 600GB-15K RPM
Technical Information
- Capacity : 600 GB
- Form Factor : 3.5 LFF
- Interface : SAS 12 GB/S
- Data Transfer Rate : 1.2 GBPS
- Spindle Speed : 15000 RPM
- Features : Digitally Signed Firmware
- Bundled With : HPE Smart Carrier Converter
Extended Specifications
- Device Type : Hard Drive – Hot-swap
- Capacity : 600 GB
- Form Factor : 3.5 LFF
- Interface : SAS 12 GB/S
- Features : Digitally Signed Firmware
- Bundled With : HPE Smart Carrier Converter
- Drive Transfer Rate : 1.2 GBPS (External)
- Spindle Speed : 15000 RPM
- Interfaces : 1 X SAS 12 GB/S
- Compatible Bay : 3.5 LFF
Environmental Parameters
- Min Operating Temperature : 50 °F
- Max Operating Temperature : 95 °F
Dimension and Weight
- Width : 4 Inch
- Depth : 5.8 Inch
- Height : 1 Inch
- Weight : 1.52 LBS
Compatibility Information
- HPE Proliant Dl380 Gen10 (3.5)
- HPE Proliant Dl380 Gen10 Base (3.5)
- HPE Proliant Dl380 Gen10 Entry (3.5)
- HPE Proliant Dl380 Gen10 High Performance (3.5)
- HPE Proliant Dl380 Gen10 Performance (3.5)
- HPE Proliant Dl380 Gen10 Solution (3.5)
