Description
Overview of the HPE 32GB DDR4 RAM
The HPE P06033-K21 is a 32GB DDR4 RAM module that operates at a speed of 3200MHz and has a PC4-25600 rating. It is designed for use in server environments and features Error Correcting Code (ECC) technology for improved data integrity and reliability. The RAM module has a 288-pin form factor, which is the standard for DDR4 memory.
This RAM module is manufactured by HPE (Hewlett Packard Enterprise) which is a leading provider of enterprise-level hardware and software solutions. The P06033-K21 RAM is part of HPE’s line of memory products, which are optimized for use in HPE server systems.
With 32GB of memory, this RAM module provides a significant increase in memory capacity, allowing for improved performance and faster data processing in server environments. The 3200MHz speed and PC4-25600 rating also contribute to the RAM’s overall performance, making it a suitable choice for high-demand applications and tasks.
Error Correction and Data Integrity
Error Correction Code (ECC) is a type of technology that is used to detect and correct errors that may occur in data storage and transmission. ECC memory, such as the HPE P06033-K21 RAM, uses extra memory bits to store error-correcting code. This allows the system to detect and correct errors that may occur due to a variety of reasons such as noise, electromagnetic interference, or manufacturing defects.
The P06033-K21 RAM module is designed for use in server environments, where data integrity and reliability are of utmost importance. ECC memory helps ensure that data stored in the memory is accurate and can be trusted. It also helps protect against data corruption, which can occur due to errors in the memory or other hardware components.
With ECC memory, the system can detect and correct single-bit errors, which can occur due to random events such as cosmic rays or electrical noise. This ensures that data is accurate and can be trusted, reducing the risk of data corruption and loss. ECC memory also helps improve the overall reliability of the system and reduces the risk of downtime caused by memory errors.
Installation and Setup Instructions
Installing the P06033-K21 HPE 32GB DDR4 3200Mhz Pc4-25600 288Pin Ecc Ram can be done in a few simple steps. Here is a general guide on how to install the RAM module:
- Start by shutting down your computer and unplugging it from the power source.
- Remove the computer’s cover to access the memory slots. This will vary depending on the type of computer you have, so consult your computer’s manual for specific instructions.
- Locate the memory slots on the motherboard. These are typically located near the CPU and are labeled as DIMM (Dual In-line Memory Module) slots.
- Carefully release the tabs on either side of the memory slot to open it up.
- Align the notches on the bottom of the RAM module with the notches in the memory slot, making sure that the module is oriented correctly.
- Gently press the RAM module into the memory slot until it clicks into place.
- Repeat the process for any additional RAM modules you are installing.
- Replace the computer’s cover and plug the power cord back in.
- Turn on the computer and check the amount of installed RAM in the system information.
- Finally, check if the system is recognizing the RAM and if it is running at the correct clock speed and voltage.
It is recommended to check the computer’s manual or the system’s documentation for the specific details and instructions, as it may vary depending on the system configuration, different motherboards, and BIOS versions.
It’s also important to ensure that the RAM module is compatible with your system before installing it. Make sure that the RAM module is compatible with the memory type, memory speed, voltage, and the number of memory slots available on your motherboard.
General Information
- Brand Name: HPE
- MPN: P06033-K21
- Type: Memory (RAM)
- RAM Type: Pc4-25600
- Product Name: HPE Smart Memory
32GB DDR4 DIMM 288Pin registered Memory Module - SKU: P06033-K21
Technical Information
- Storage Capacity: 32GB
- Memory Type: DDR4 SDRAM – Dimm 288-pin
- Number Of Modules: 1 X 32GB
- Memory Speed: 3200MHZ (PC4-25600)
- Features: Dual Rank X4, Registered
- Error Checking: Ecc
- Voltage: 1.2 V
- Latency Timings: Cl22
- Upgrade Type: System Specific
- Device Supported: Server
Physical Characteristics
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X
0.75 In) - Weight: 0.45 Kg (1 Lb)
Compatibility Information
- Designed For: Proliant Dl325 Gen10 Plus, Dl385
Gen10 Plus, Dl385 Gen10 Plus Entry
