Description
Power Consumption and Thermal Management
Power consumption and thermal management are important considerations for any solid state drive, including the P06194R-B21 HPE 480GB SATA 6GBPS Read Intensive SSD. Here’s an overview of each:
Power Consumption: Power consumption refers to the amount of power that the SSD requires to operate. The P06194R-B21 SSD has a low power consumption profile, which can lead to lower energy costs and longer battery life in mobile devices. It has a maximum power consumption of 1.25W during active use and 0.65W during idle use. The power consumption varies depending on the workload and usage of the SSD.
Thermal Management: Thermal management refers to the processes and techniques used to regulate the temperature of the SSD during operation. The P06194R-B21 SSD is designed with thermal sensors that constantly monitor the temperature of the drive. When the temperature rises beyond a certain threshold, the SSD will automatically adjust its performance to prevent overheating.
The P06194R-B21 SSD also includes firmware-controlled power management features that help to optimize performance and reduce heat generation. These features include Advanced Power Management (APM) and Automatic Partial to Slumber (APTS), which help to minimize power consumption and heat generation when the SSD is not in active use.
In addition, the P06194R-B21 SSD has a sturdy metal case that helps to dissipate heat and prevent thermal throttling. The drive is also engineered to be compatible with HPE’s Thermal Logic technology, which uses dynamic power and cooling management to balance temperature and power consumption across the entire data center.
Endurance and Reliability
The endurance and reliability of the P06194R-B21 HPE 480GB SATA 6GBPS Read Intensive solid state drive refer to its ability to withstand heavy usage over time and to maintain its performance and data integrity throughout its lifespan.
Endurance is a measure of how much data can be written to the SSD before it starts to experience failures or a decrease in performance. In the case of the P06194R-B21 SSD, it is designed for read-intensive workloads, meaning that it is optimized for situations where data is frequently read but not frequently written. As a result, its endurance rating is likely to be lower than other SSDs that are designed for write-intensive workloads, as it is not optimized for frequent writing.
Reliability, on the other hand, refers to the SSD’s ability to maintain its performance and data integrity over time. This includes factors such as error correction, wear leveling, and power loss protection, which are all important features that help ensure that data is stored and retrieved correctly and reliably.
The P06194R-B21 SSD is designed with a number of features to improve its reliability, including HPE Smart Path technology, which optimizes performance and reliability for mixed workload environments, and HPE SmartSSD Wear Gauge, which allows for monitoring of the SSD’s wear level and helps predict when it may need replacement.
Compatibility with Different Systems
The P06194R-B21 HPE 480GB SATA 6GBPS Read Intensive solid state drive is designed to be compatible with a wide range of systems, both in terms of hardware and software. The drive uses the standard SATA interface, which is widely supported by most modern computer systems. This includes desktops, laptops, and servers that support SATA 6Gbps interface.
In terms of software compatibility, the P06194R-B21 SSD supports a variety of operating systems, including Windows, Linux, and VMware. The drive also supports various file systems such as NTFS, FAT32, and ext4, which are commonly used in different operating systems.
Furthermore, the P06194R-B21 SSD is compatible with various hardware configurations such as different motherboards, processors, and memory configurations. It is also compatible with RAID configurations which enable high-performance and redundancy for critical data storage.
It’s important to note that while the P06194R-B21 SSD is designed to be compatible with a wide range of systems, it’s always a good idea to check the technical specifications and compatibility guides provided by HPE to ensure that the drive is fully compatible with your specific system. Additionally, it is recommended to use the latest firmware version to ensure optimal performance and compatibility with different systems.
Main Informaion about this HPE P06194R-B21
- Manufacturer :HPE
- Model Number or SKU: P06194R-B21
- Device Type: Solid State Drive – Hot-Swap
- Sub Type: SATA 6GBPS
Technical
Features for SATA 6GBPS SSD
- Capacity: 480GB
- Form Factor: 2.5 inch SFF
- Interface: SATA 6Gbps
- NAND Flash Memory Type: Triple-level cell (TLC)
- Plug Type: Hot Pluggable
- Connectivity Type: Single
- Carrier Type: Smart Carrier (SC)
- Workload Type: Read Intensive
- Bundled with: HPE SmartDrive Carrier (SC)
- Features: Digitally Signed Firmware (DS)
- Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
- Height: 7.00 mm(0.30 inch)
Performance of HPE 480GB Solid State Drive
- Lifetime Writes (TB): 430
- Endurance DWPD (Drive Writes Per Day): 0.50
- Drive Transfer Rate: 6 GBps (external)
- MAX Seq. Reads Throughput (MiB/s): 530
- MAX Seq. Writes Throughput (MiB/s): 300
- Random Read Average Latency uSec (4KiB,Q1): 120
- Random Write Average Latency uSec (4KiB,Q1): 65
- Random Read IOPS (4KiB, Q=16): 65000
- Random Write IOPS (4KiB, Q=16): 15000
- MAX Random Read IOPS (4KiB): 65500@Q32
- MAX Random Write IOPS (4KiB): 15400@Q1
Expansion & Connectivity of 480GB 2.5inch SSD
- Interfaces: 1 x SATA 6 Gb/s
- Compatible Bay: 2.5″ SFF
Dimensions & Weight for 2.5inch Solid State Drive
- Height: 0.63 inch
- Width: 3.10 inch
- Depth: 5.45 inch
- Weight: 1.50 lbs
Compatibility Information of Read Intensive SSD
- HPE Apollo Series: 4200 Gen9 for Google (2.5 inch)
- HPE ProLiant DL Series: DL20 Gen10 (2.5 inch), DL20 Gen10 Entry (2.5 inch), DL20 Gen10 Performance (2.5 inch), DL20 Gen10 solution (2.5 inch), DL325 Gen10 (2.5 inch), DL325 Gen10 Base (2.5 inch), DL325 Gen10 Entry (2.5 inch), DL325 Gen10 Performance (2.5 inch), DL325 Gen10 Plus (2.5 inch), DL325 Gen10 SMB Solution (2.5 inch), DL325 Gen10 Solution (2.5 inch), DL360 Gen10 Low (2.5 inch), DL360 Gen10 Network Choice (2.5 inch), DL360 Gen10 SMB (2.5 inch), DL360 Gen10 SMB Network Choice (2.5 inch), DL360 Gen10 Solution (2.5 inch), DL380 Gen10 All Flash Server for Datera (2.5 inch), DL380 Gen10 Entry SMB (2.5 inch), DL380 Gen10 for Cohesity DataPlatform (2.5 inch), DL380 Gen10 Hybrid Server for Datera (2.5 inch), DL380 Gen10 Network Choice (2.5 inch), DL380 Gen10 Network Choice for CTERA (2.5 inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5 inch), DL380 Gen10 Server for CTERA (2.5 inch), DL380 Gen10 SMB (2.5 inch), DL380 Gen10 SMB Networking Choice (2.5 inch), DL380 Gen10 Solution (2.5 inch), DL385 Gen10 (2.5 inch), DL385 Gen10 Base (2.5 inch), DL385 Gen10 Entry (2.5 inch), DL385 Gen10 High-Performance (2.5 inch), DL385 Gen10 Performance (2.5 inch), DL385 Gen10 Plus (2.5 inch), DL385 Gen10 Plus Entry (2.5 inch), DL385 Gen10 SMB (2.5 inch), DL385 Gen10 Solution (2.5 inch), DL388 Gen10 (2.5 inch), DL580 Gen10 (2.5 inch), DL580 Gen10 Base (2.5 inch), DL580 Gen10 Entry (2.5 inch), DL580 Gen10 Performance (2.5 inch), DL580 Gen9 SAP HANA Scale-out Base Configuration (2.5 inch), DL580 Gen9 SAP HANA Scale-up Base Configuration (2.5 inch)
- HPE ProLiant ML Series: ML30 Gen10 (2.5 inch), ML30 Gen10 Entry (2.5 inch), ML30 Gen10 Performance (2.5 inch), ML30 Gen10 Solution (2.5 inch), ML30 Gen9 Entry (2.5 inch), ML30 Gen9 Solution (2.5 inch), ML350 Gen10 (2.5 inch), ML350 Gen10 Base (2.5 inch), ML350 Gen10 Entry (2.5 inch), ML350 Gen10 High Performance (2.5 inch), ML350 Gen10 Performance (2.5 inch), ML350 Gen10 SMB (2.5 inch), ML350 Gen10 Solution (2.5 inch), ML350 Gen10 Special Server (2.5 inch), ML350 Gen10 Sub-Entry (2.5 inch) | HPE Synergy 480 Gen10 Compute Module (2.5 inch), 480 Gen10 w/o Drives Compute Module (2.5 inch)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.







