Description
Accelerate workload performance
P06590-X21 is a solid-state drive (SSD) produced by Hewlett Packard Enterprise (HPE). It has a capacity of 7.68 terabytes and uses the SAS (Serial Attached SCSI) interface with a 12 Gbps data transfer rate. This drive is intended for use in enterprise environments and is optimized for mixed use (a combination of read-intensive and write-intensive workloads).
Performance-wise, the drive should have fast read and write speeds, low latencies, and high endurance. This drive is designed for high-performance storage and data-intensive workloads such as databases, analytics, and virtualization.
Keep in mind that the performance of any drive can vary depending on how it is configured, the type of workload it is being used for, and the overall performance of the rest of the system it is installed in.
General Compatibility
The P06590-X21 HPE SSD is designed to be compatible with a variety of different enterprise storage environments. It uses the SAS (Serial Attached SCSI) interface, which is a popular and widely-used interface for high-performance storage devices. The drive supports the SAS-12 Gbps data transfer rate, which allows it to communicate with other SAS-enabled devices at high speeds.
It is generally compatible with servers, storage arrays, and host bus adapters (HBAs) that support the SAS interface and 12 Gbps data transfer rate.
It is also important to confirm that the firmware version of the drive is compatible with the firmware version of the other devices it will be used with. It’s also important to check that the drive is compatible with the operating system and storage software being used.
It’s a good idea to check with the manufacturer or consult the server or storage array documentation for information on compatible devices and software. It is also a good idea to check with your IT department or the vendor of your storage environment to ensure that the model of HPE SSD is fully compatible with your existing infrastructure before purchasing it.
Reliability
The reliability of the P06590-X21 HPE 7.68TB SAS SSD is generally considered to be high due to its solid-state design, which has no moving parts, and is thus less susceptible to physical failure. As a Enterprise level drive it should have high endurance, which means it can withstand a high number of read and write cycles, which is a measure of the number of times data can be written to and read from the drive over its lifetime.
HPE as a company generally considered as one of the top enterprise grade vendors, they include features in the drive such as power-loss protection, which helps to protect data in the event of a power failure, and advanced error correction technologies, which help to detect and correct errors that may occur during data transfer.
General Information about this HPE P06590-X21
- Manufacturer: HPE
- Part Number or SKU# P06590-X21
- Device Type: Solid State Drive
- Interface: SAS 12GBPS
Technical Information of 7.68TB Solid State Drive
- Storage Capacity: 7.68 TB
- Form Factor: 2.5 inch SFF
- Plug Type: Hot Pluggable
- NAND Flash Memory Type: Triple-Level Cell (TLC)
- Carrier Type: Smart Carrier (SC)
- Workload Type: Read Intensive
- Features: Digitally Signed Firmware (DS)
Performance Information for SAS SSD
- Lifetime Writes: 14016
- Endurance DWPD (Drive Writes Per Day): 1
- Drive Transfer Rate: 12 Gb/sec (external)
- Random Read IOPS (4KiB, Q=16): 113000
- Max Random Read IOPS (4KiB): 180000@Q64
- Random Write IOPS (4KiB, Q=16): 67000
- Max Random Write IOPS (4KiB): 67000@Q4
- MAX Seq. Reads Throughput (MiB/s): 1080
- MAX Seq. Writes Throughput (MiB/s): 1030
- Random Read Average Latency uSec (4KiB, Q1): 120
- Random Write Average Latency uSec (4KiB, Q1): 34
Power Consumption for this Read Intensive SSD
- Idle Time: 3.64 Watt
- Random Read: 9.97 Watt
- Random Write: 9.97 Watt
- Sequential Read: 7.27 Watt
- Sequential Write: 10.49 Watt
- Random Read/Write: 9.97 Watt
- Maximum: 10.49 Watt
Dimensions & Weight
- Height: 5.00 inch
- Width: 7.00 inch
- Depth: 9.00 inch
- Weight: 1.1 Lbs
Compatibility
- HPE ProLiant DL Series: DL20 Gen10 (2.5inch), DL20 Gen10 Entry (2.5inch), DL20 Gen10 Performance (2.5inch), DL20 Gen10 solution (2.5inch), DL325 Gen10 Base (2.5inch), DL325 Gen10 Solution (2.5inch), DL360 Gen10 Remote Office Branch Office Server for Cohesity DataPlatform (2.5inch), DL385 Gen10 Plus (2.5inch), DL385 Gen10 Plus Entry (2.5inch)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
