Description
High Performance with Low Latency
The P10442-H21 HPE 1.92TB 2.5-inch SFF SAS 12Gbps SC Read Intensive Hot Plug G9 G10 SSD is designed to provide high performance with low latency, making it an ideal choice for demanding enterprise applications.
One key factor contributing to the drive’s performance is its read-intensive optimization, which ensures that the drive uses less power during periods of low activity and is able to quickly access data when needed. Additionally, the drive’s support for the SAS (Serial Attached SCSI) interface provides fast data transfer speeds of up to 12Gbps, reducing the amount of time required to access data.
The drive’s small form factor (SFF) and hot-plug capability also help to reduce latency by allowing for quick and easy installation and replacement in enterprise storage systems, reducing downtime and increasing availability.
Power Management and Energy Efficiency
The P10442-H21 HPE 1.92TB 2.5-inch SFF SAS 12GBps SC Read Intensive Hot Plug G9 G10 SSD is designed to be energy efficient and offer good power management capabilities. Here are some of the key features that contribute to its energy efficiency:
- Low Power Consumption: The drive is designed to consume less power, which helps to reduce energy costs and reduce the environmental impact of your data center.
- Dynamic Power Management: The drive includes dynamic power management capabilities, which help to reduce power consumption by adjusting power usage based on the drive’s workload. This helps to improve energy efficiency and reduce energy costs.
- Power Loss Protection: The drive includes power loss protection, which helps to protect data in the event of a power outage. This helps to ensure that your data remains safe and secure, even in the event of an unexpected power failure.
- Compatible with HPE Energy Efficient Servers: The drive is compatible with HPE energy efficient servers, which helps to optimize energy usage and reduce energy costs.
Troubleshooting and Maintenance
Troubleshooting the P10442-H21 HPE 1.92TB 2.5-inch SFF SAS 12Gbps SC Read Intensive Hot Plug G9 G10 SSD may require the assistance of an experienced IT professional. However, here are some common steps you can follow for troubleshooting:
- Check the SAS cable connections: Ensure that the SAS cable connections are securely fastened and free of any damage or corrosion.
- Verify that the drive is recognized by the system: Use the system’s BIOS or RAID controller to verify that the drive is recognized and functioning properly.
- Check the status of the drive: Use the system’s BIOS or RAID controller to check the status of the drive and determine if there are any error messages or notifications.
- Update the firmware: Make sure that the latest firmware is installed on the drive to ensure that it is functioning properly.
If you are unable to resolve the issue using these steps, you may need to seek the assistance of an experienced IT professional or contact HPE for technical support.
Maintenance:
- Regularly monitor the health of the drive: Use the system’s BIOS or RAID controller to monitor the health of the drive and ensure that it is functioning properly.
- Keep the drive clean: Regularly clean the drive to prevent dust buildup and ensure that it is functioning at optimal temperatures.
- Replace the drive as necessary: Replace the drive if it fails or becomes worn out, to maintain the health and performance of the enterprise storage system.
General Information
- Manufacturer: Hewlett Packard Enterprise (HPE)
- MPN: P10442-H21
- Spare Part Number: P10638-001
- Type: Hot-Swap Solid State Drive
- SSD Type: SAS-12GBPS
Technical Information
- Capacity: 1.92 TB
- Form Factor: 2.5-inch SFF
- Bytes per Sector: 512
- Plug Type: Hot Pluggable
- Carrier Type: Smart Carrier (SC)
- Workload Type: Read Intensive
- Features: Digitally Signed Firmware, HPE Value SAS
- Bundled With: HPE Smart Carrier
Performance
- Lifetime Writes: 3.5
- Endurance DWPD (Drive Writes Per Day): 1
- Drive Transfer Rate (External): 12 GB/sec
- Random Read IOPS (4KiB, Q=16): 97000
- Max Random Read IOPS (4KiB): 155000@Q32
- Random Write IOPS (4KiB, Q=16): 36000
- Max Random Write IOPS (4KiB): 36000@Q4
Power
- Power Consumption: 7.26 Watt
Dimensions & Weight
- Height: 0.63 inch
- Width: 3.10 inch
- Depth: 5.45 inch
- Weight: 1.50 lbs
Compatibility Information
- HPE ProLiant DL Series: DL325 Gen10 (2.5 inch), DL325 Gen10 Entry (2.5 inch), DL325 Gen10 Performance (2.5 inch), DL325 Gen10 SMB Solution (2.5 inch), DL360 Gen10 (2.5 inch), DL360 Gen10 Base (2.5 inch), DL360 Gen10 Entry (2.5 inch), DL360 Gen10 High Performance (2.5 inch), DL360 Gen10 Low (2.5 inch), DL360 Gen10 Performance (2.5 inch), DL360 Gen10 SMB (2.5 inch), DL360 Gen10 Solution (2.5 inch), DL380 Gen10 Entry SMB (2.5 inch), DL380 Gen10 for Cohesity DataPlatform (2.5 inch), DL380 Gen10 SMB (2.5 inch), DL380 Gen9 (2.5 inch), DL380 Gen9 Base (2.5 inch), DL380 Gen9 Entry (2.5 inch), DL380 Gen9 High Performance (2.5 inch), DL380 Gen9 Performance (2.5 inch), DL380 Gen9 Scale-up SAP HANA Tailored Datacenter Integration Compute Block (2.5 inch), DL380 Gen9 Special (2.5 inch), DL560 Gen10 (2.5 inch), DL560 Gen10 Base (2.5 inch), DL560 Gen10 Entry (2.5 inch), DL560 Gen10 Performance (2.5 inch), DL580 Gen10 (2.5 inch), DL580 Gen10 Base (2.5 inch), DL580 Gen10 Entry (2.5 inch), DL580 Gen10 Performance (2.5 inch)
- HPE ProLiant XL Series: XL230k Gen10 Compute Tray (2.5 inches)
