Description
Introduction to 6.4TB SSD
Durability and Reliability of Hot-Swap SSD
The HPE P13703-B21 PCI-Express 6.4TB 2.5 Inch SFF NVME Mixed Use Hot-Swap SSD is designed to provide high levels of durability and reliability for enterprise-class applications. The NVME technology and PCI-Express interface used in this SSD provide fast data transfer rates and improved performance, while the 2.5 inch SFF form factor ensures a compact design that fits into a wide range of enterprise systems.
In terms of durability, the P13703-B21 SSD has been designed with hot-swap capability, allowing for easy removal and replacement of the drive without the need to power down the system. This can help to reduce downtime in the event of a drive failure. Additionally, the SSD features a wear-leveling algorithm that helps to distribute data across the entire drive, reducing the risk of data loss due to drive wear.
In terms of reliability, the P13703-B21 SSD features advanced error correction and data protection mechanisms to ensure that data is protected against corruption or loss. The drive also uses advanced power management techniques to minimize the risk of data loss due to power outages or unexpected system failures.
Installation and Maintenance
The HPE P13703-B21 PCI-Express 6.4TB 2.5 Inch SFF NVME Mixed Use Hot-Swap SSD is designed for ease of installation and maintenance. The drive is compatible with HPE systems and can be easily integrated into existing infrastructure. The 2.5 inch SFF form factor allows for easy installation into standard drive bays, and the hot-swap capability allows for easy replacement of the drive without shutting down the system.
Installation:
- Make sure the server is powered off and unplugged from the power source.
- Locate an empty drive bay that is compatible with the 2.5 inch SFF form factor.
- Remove the drive bay cover and insert the HPE P13703-B21 SSD into the drive bay.
- Connect the data cable and power cable to the drive.
- Replace the drive bay cover and secure it in place.
- Power on the server and install the necessary software and drivers to configure the drive.
Maintenance:
- Make sure the server is powered off and unplugged from the power source before performing any maintenance.
- If the drive needs to be replaced, simply remove the drive bay cover and release the drive from the bay.
- Insert the new drive and connect the data cable and power cable.
- Replace the drive bay cover and secure it in place.
- Power on the server and update the necessary software and drivers.
It is recommended to regularly monitor the drive’s performance and health, and perform regular firmware updates to ensure optimal performance. The HPE P13703-B21 SSD is designed for durability and reliability, but proper maintenance is still necessary to ensure long-term performance.
Key Information of HPE P13703-B21
- Manufacturer : HPE
- Model Part Number or SKU# P13703-B21
- Device Type: Solid State Drive – Hot-Swap
- Capacity: 6.4 TB
- Form Factor: 2.5 Inch SFF
- Interface: PCI Express x4 (NVME)
- Plug Type: Hot Pluggable
- Carrier Type: Smart Carrier NVME (SCN)
- Workload Type: Mixed Use
- NAND Flash Memory Type: Triple-Level Cell (TLC)
- Connectivity: Single Port
- Bundled with: HPE Smart Carrier NVMe (SCN)
- Features: Digitally Signed Firmware
- Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
- Height: 15.00 mm (0.60 inch)
Performance of PCI-E
- Lifetime Writes: 36540
- Endurance DWPD (Drive Writes Per Day): 3.10
- MAX Seq Reads Throughput (MiB/s): 3200
- Max Seq Writes Throughput (MiB/s): 3100
- Random Read Avg. Latency uSec (4KiB,Q1): 83
- Random Write Avg. Latency uSec (4KiB,Q1): 18
- Random Read IOPS (4KiB, Q=16): 129000
- Random Write IOPS (4KiB, Q=16): 165000
- Max Random Read IOPS (4KiB): 170000@Q256
- Max Random Write IOPS (4KiB): 225000@Q32
Product Dimensions & Weight of Solid State Drive
- Height: 5.00 inch (12.70 cm)
- Width: 7.00 inch (17.78 cm)
- Depth: 9.00 inch (22.86 cm)
- Weight: 1.10 lbs (0.50 kg)
Expansion & Connectivity of 6.4 TB
- Interfaces: 1 x PCI Express X4 (NVME)
- Compatible Bay: 2.5″ SFF
Compatibility Information of Mixed Use SSD
- Designed for HPE ProLiant Generation10 servers
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.