Description
More Information
The P22274-B21 HP 12.8TB NVMe SFF Mixed Use TLC SSD is a high-performance storage device that utilizes NAND flash memory to store data. This specific model is a NVMe (Non-Volatile Memory express) SSD which is a host controller interface and storage protocol that utilizes the high-speed PCI Express bus to increase the speed at which data can be transferred to and from the SSD. This NVMe drive is designed to be used in Small Form Factor (SFF) systems, which typically have more limited space and power requirements compared to larger systems.
This drive is designed for mixed use, which means it is well suited for a variety of workloads, including both read-intensive and write-intensive workloads. It is also TLC (Triple-Level Cell) NAND flash which is a type of NAND flash memory that stores three bits of data per cell. This results in a lower cost per GB of storage, but with a slightly lower endurance compared to MLC (Multi-Level Cell) or SLC (Single-Level Cell) NAND flash.
In terms of capacity, the drive offers 12.8TB of storage which is a large amount of storage space for storing large amounts of data such as multimedia files, large datasets and backups.
It is recommended to check with the vendor or system administrator before installing the drive to ensure that the system is compatible with the drive and to verify the performance and endurance specifications for this specific model.
High Performance
The performance of an SSD is typically measured by its read and write speeds, as well as its input/output operations per second (IOPS) and access times.
The HP 12.8TB NVMe SFF Mixed Use TLC SSD, being an NVMe drive it should provide faster read and write speeds than SATA SSDs. However, the specific performance metrics for this drive are not publicly available.
Keep in mind that the performance of an SSD can also depend on various factors such as the workload, the system or device it is connected to, and the environment in which it is used.
In general, NVMe drives tend to have higher performance than SATA drives because they use the PCIe interface, which provides faster data transfer speeds. NVMe drives also typically have lower access times and higher IOPS than SATA drives.
It is always recommended checking with the vendor or consulting with a system integrator to ensure the drive meets the performance requirements for the intended use case before making a purchase.
Reliability
Reliability is a crucial aspect to consider when choosing an SSD, as it can affect the overall performance and longevity of the drive. There are several factors that can affect the reliability of an SSD, including the type of NAND flash memory used, the quality of the controller, and the design of the drive.
One of the key parameters that affects the reliability of an SSD is the Total Bytes Written (TBW) which is the amount of data that can be written to the drive before it is likely to fail. A 12.8 TB SSD with high-end specs should have a high TBW rating, which could be in multiples of Petabytes written (PBW) , which would indicate that the drive is suitable for heavy use and high-end enterprise workloads.
Another important parameter for the reliability is the Mean Time Between Failure (MTBF) which is a measure of the expected time between two failures, the higher the MTBF is, the more reliable the drive is.
Keep in mind that the specific model and vendor of the SSD also play a role in its reliability. HPE has a reputation for providing high-quality and reliable SSDs, and are known to have a good track record in terms of performance and longevity.
It’s also important to note that the reliability can be impacted by the environment it operates in, such as temperature, humidity, and vibration. Make sure to keep the drive in a cool and dry place and avoid exposing it to extreme temperatures or harsh conditions.
General Information about this HPE P22274-B21
- Manufacturer: HPE
- Part Number or SKU# P22274-B21
- Interface: NVMe
- Device Type: Solid State Drive (SSD)
Technical Information of 12.8TB Solid State Drive
- Capacity: 12.8TB
- Height: 15 Mm
- Form Factor: 2.5 Inch SFF
- Plug Type: Hot-plug
- Carrier Type: SCN
- Flash Type: TLC
- Port: Dual
Performance for this PCI-Express NVMe x4 SSD
- Sequential Reads: 7000 Mbps
- Sequential Writes: 3800 Mbps
- Random Reads: 175000 Iops
- Random Writes: 265000 Iops
Dimensions & Weight for 2.5 Inch Solid State Drive
- Height: 0.63 inch
- Width: 3.10 inch
- Depth: 5.45 inch
- Weight: 1.50 lbs
Miscellaneous:
- Device Supported: Storage System
- Server
- Compatibility
- HPE ProLiant Rack Server
- HPE Tower Server
- HPE BladeSystem Servers
- HPE Synergy Storage System
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
