Description
Advanced Data Management Features
The HPE P40476-X21 1.6TB DS SAS-24GBPS SFF Mixed Use Hot Swap SSD comes with a number of advanced data management features that help ensure data reliability, performance, and security. Some of these features include:
- End-to-End Data Protection: This feature provides protection for data as it travels from the host to the SSD and vice versa, helping to ensure data integrity.
- Error Correction Code (ECC): The ECC feature helps detect and correct errors that may occur during data transfers, further improving data reliability.
- Wear Leveling: This feature helps ensure that data is distributed evenly across the SSD, reducing the risk of disk failures caused by excessive wear on certain blocks.
- Hot Swap Capabilities: The hot swap capabilities of the HPE P40476-X21 allow for easy replacement of faulty SSDs without having to shut down the system, helping to reduce downtime and maintain high levels of data availability.
- Advanced Power Management: The advanced power management features of the HPE P40476-X21 help reduce power consumption and extend the lifespan of the SSD, making it a cost-effective storage solution.
- Trim Support: The Trim support feature helps optimize the performance of the SSD by freeing up unused blocks and enabling more efficient write operations, improving overall system responsiveness.
Performance and Speed
The HPE P40476-X21 1.6TB DS SAS-24GBPS SFF Mixed Use Hot Swap SSD is a high-performance solid-state drive that provides fast data transfer speeds and low latency. It uses SAS (Serial Attached SCSI) interface with a transfer rate of 24 Gbps, which provides fast data transfer speeds, reducing the time it takes to access and transfer large amounts of data.
In terms of performance, the HPE P40476-X21 can deliver sequential read and write speeds of up to 2600 MB/s and 1800 MB/s respectively, making it ideal for applications that require fast data access such as high-performance computing, big data analytics, and virtualization. Additionally, the drive features a large 1.6TB capacity, providing ample storage space for large data sets.
The HPE P40476-X21 is also designed with reliability in mind, featuring hot-swap capability, allowing you to remove and replace the drive without having to power down the system. This makes it ideal for use in data center and enterprise environments, where minimizing downtime is a key concern.
Storage Tiering and Caching
The HPE P40476-X21 1.6TB DS SAS-24GBPS SFF Mixed Use Hot Swap SSD supports both storage tiering and caching, which help improve the performance and efficiency of storage systems.
- Storage Tiering: Storage tiering is a technique that separates data into different categories based on their importance, and then stores each category on the most appropriate type of storage device. For example, frequently accessed data can be stored on fast, expensive SSDs, while less frequently accessed data can be stored on slower, more cost-effective hard disk drives.
- Caching: Caching is a technique that stores frequently accessed data in a high-speed memory cache, such as an SSD, to improve access times. This helps to reduce the number of read and write operations that have to be performed on the underlying storage device, improving overall system performance.
The HPE P40476-X21 1.6TB DS SAS-24GBPS SFF Mixed Use Hot Swap SSD can be used as a cache or storage tier in a storage system, providing fast access to frequently accessed data while also offering a high-capacity storage solution for less frequently accessed data. This can help to improve overall system performance, increase storage efficiency, and reduce costs by allowing organizations to store data on the most appropriate type of storage device.
General Information about this HPE P40476-X21
- Brand Name : HPE
- Part Number or SKU# P40476-H21
- Type: Solid State Drive – SSD
- SSD Type: SAS 24GBPS
Technical Information of HPE 1.6Terabyte Solid State Drive
- Device Type: Solid State Drive – Hot-Swap
- Capacity: 1.6 TB
- Interface: SAS 24GBPS
- NAND Flash Memory Type: Triple-level cell (TLC)
- Workload Type: Read Intensive
- Plug Type: Hot Pluggable
- Connectivity Type: Dual
- Carrier Type: Basic Carrier (BC)
- Form Factor: 2.5 inch SFF
- Bundled with: HPE Basic Carrier (BC)
- Platform Supported: HPE ProLiant Rack
- Features: Digitally Signed Firmware (DS)
Dimensions & Weight of this 24 GBPS SSD
- Height: 5.75 inch
- Width: 8.63 inch
- Depth: 9.00 inch
- Weight: 1.10 lbs
Compatibility Information
- HPE ProLiant DL Series: DL20 Gen10 Plus (2.5inch), DL20 Gen10 Plus Base (2.5inch), DL20 Gen10 Plus Entry (2.5inch), DL20 Gen10 Plus High Performance (2.5inch), DL20 Gen10 Plus Performance (2.5inch), DL325 Gen10 Plus V2 (2.5inch), DL325 Gen10 Plus V2 Base (2.5inch), DL325 Gen10 Plus V2 for Weka Base Tracking (2.5inch), DL325 Gen10 Plus V2 Performance (2.5inch), DL345 Gen10 Plus (2.5inch), DL345 Gen10 Plus Base (2.5inch), DL345 Gen10 Plus Entry (2.5inch), DL360 Gen10 Plus (2.5inch), DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5inch), DL360 Gen10 Plus for Weka Base Tracking (2.5inch), DL360 Gen10 Plus Network Choice (2.5inch), DL365 Gen10 Plus (2.5inch), DL380 Gen10 Plus (2.5inch), DL380 Gen10 Plus Network Choice (2.5inch)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
