Description
Compatibility with HPE Storage Systems
The HPE P49031-K21 1.92TB DS SAS-24Gbps SFF Read Intensive G10+ SSD is designed to be compatible with a range of HPE storage systems, making it an ideal storage solution for organizations that rely on HPE storage solutions. The drive’s SAS interface and 24Gbps data transfer rate make it well-suited for use in HPE’s latest generation of storage systems, allowing it to take advantage of the full range of features and capabilities provided by these systems.
Additionally, the HPE P49031-K21 is fully tested and validated for compatibility with HPE’s storage systems, ensuring that it will perform to the highest standards and provide a consistent level of performance and reliability. This compatibility also helps to simplify the installation process, reducing the amount of time and effort required to integrate the drive into your storage environment.
Easy Installation and Management
The HPE P49031-K21 1.92TB DS SAS-24Gbps SFF Read Intensive G10+ SSD is designed to be easy to install and manage, making it an ideal storage solution for organizations that need to quickly and easily add new storage capacity to their systems. The drive’s small form factor (SFF) and plug-and-play design allow it to be easily integrated into a range of storage systems, without the need for any specialized tools or equipment.
Additionally, the HPE P49031-K21 is fully supported by HPE’s management tools and utilities, making it easy to monitor the health and performance of the drive and ensure that it is operating optimally. These tools also provide a range of diagnostic and troubleshooting features, allowing you to quickly and easily resolve any issues that may arise with the drive.
Power Consumption and Efficiency
The HPE P49031-K21 1.92TB DS SAS-24Gbps SFF Read Intensive G10+ SSD is designed to be highly energy-efficient, reducing your overall energy costs and helping you to operate more sustainably. The drive’s low power consumption helps to reduce the overall energy consumption of your storage system, which can result in lower electricity bills and a smaller carbon footprint.
Additionally, the HPE P49031-K21 is designed to meet a range of environmental compliance standards, including RoHS and WEEE, making it an environmentally responsible choice for your storage needs. These certifications help to ensure that the drive is free of hazardous materials and that it is designed to be recyclable, reducing its impact on the environment.
Interface and Connectivity
The HPE P49031-K21 1.92TB DS SAS-24Gbps SFF Read Intensive G10+ SSD features a SAS-24Gbps interface, providing fast and reliable data transfer speeds. This interface allows the drive to easily integrate into a wide range of storage systems, providing you with the flexibility you need to build the storage solution that’s right for your organization.
In addition to the SAS interface, the HPE P49031-K21 also supports dual-port connectivity, providing increased reliability and availability. This feature allows you to connect the drive to two different storage controllers, ensuring that your data is always available, even in the event of a single controller failure.
The HPE P49031-K21 also supports advanced data protection features, including T10 DIF and end-to-end data protection, helping to ensure that your data is safe and secure. With these advanced features, you can have confidence in the reliability and availability of your storage system, knowing that your data is protected at all times.
In conclusion, the HPE P49031-K21 1.92TB DS SAS-24Gbps SFF Read Intensive G10+ SSD features a SAS-24Gbps interface and dual-port connectivity, providing fast and reliable data transfer speeds and increased reliability and availability. Additionally, the drive supports advanced data protection features, ensuring that your data is always safe and secure.
General Information about this HPE P49031-K21
- Manufacturer: HPE
- Model Number or SKU# P49031-K21
- Type: Solid State Drive (SSD)
- Sub-Type: SAS-12GBPS
Specifications of HPE 1.92TB Solid State Drive
- Device Type: Solid State Drive – Hot-Swap
- Capacity: 1.92 TB
- Form Factor: 2.5 Inch SFF
- Interface: SAS 24GBPS
- NAND Flash Memory Type: Triple-level cell (TLC)
- Plug Type: Hot Pluggable
- Connectivity Type: Dual Port
- Carrier Type: Basic Carrier (BC)
- Workload Type: Read Intensive
- Bundled with: HPE Basic Carrier (BC)
- Features: Digitally Signed Firmware (DS)
- Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
- Height: 15.00 mm (0.60 inch)
Performance for this HPE SAS-24GBPS SSD
- Lifetime Writes (TB): 3424
- Endurance DWPD (Drive Writes Per Day): 1
- Drive Transfer Rate: 24 Gbps (external)
- MAX Seq. Reads Throughput (MiB/s): 2030
- MAX Seq. Writes Throughput (MiB/s): 1950
- Random Read Average Latency uSec (4KiB,Q1): 90
- Random Write Average Latency uSec (4KiB,Q1): 29
- Random Read IOPS (4KiB, Q=16): 150000
- Random Write IOPS (4KiB, Q=16): 100000
- MAX Random Read IOPS (4KiB): 15500@Q32
- MAX Random Write IOPS (4KiB): 100000@Q4
Expansion & Connectivity
- Interfaces: 1 x SAS 24 GB/S
- Compatible Bay: 2.5 Inch SFF
Product Dimensions & Weight
- Height: 0.63 inch
- Width: 3.10 inch
- Depth: 5.45 inch
- Weight: 1.50 lbs
Power Consumption
- Idle Time: 6.17 Watt
- Random Read: 7.96 Watt
- Random Write: 7.96 Watt
- Sequential Read: 8.64 Watt
- Sequential Write: 13.66 Watt
- Random Read/Write: 7.96 Watt
- MAX: 13.66 Watt
Compatibility Information
- HPE ProLiant DL Series: DL20 Gen10 Plus (2.5inch), DL20 Gen10 Plus Base (2.5inch), DL20 Gen10 Plus Entry (2.5inch), DL20 Gen10 Plus High Performance (2.5inch), DL20 Gen10 Plus Performance (2.5inch), DL325 Gen10 Plus V2 (2.5inch), DL325 Gen10 Plus V2 Base (2.5inch), DL325 Gen10 Plus V2 for Weka Base Tracking (2.5inch), DL325 Gen10 Plus V2 Performance (2.5inch), DL345 Gen10 Plus (2.5inch), DL345 Gen10 Plus Base (2.5inch), DL345 Gen10 Plus Entry (2.5inch), DL360 Gen10 Plus (2.5inch), DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5inch), DL360 Gen10 Plus for SAP HANA Compute Block (2.5inch), DL360 Gen10 Plus for Weka Base Tracking (2.5inch), DL360 Gen10 Plus Network Choice (2.5inch), DL365 Gen10 Plus (2.5inch), DL380 Gen10 Plus (2.5inch), DL380 Gen10 Plus Network Choice (2.5inch), DL385 Gen10 Plus V2 (2.5inch), DL385 Gen10 Plus V2 Base (2.5inch), DL385 Gen10 Plus V2 Entry (2.5inch)
- HPE SimpliVity 325 Gen10 Plus V2 Node (2.5inch)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
