Description
Power Consumption
The power consumption of the VK003840GWCFK HPE 3.84TB SATA 6GBPS SC Read Intensive SFF 2.5-inch solid state drive is an important factor to consider, as it can impact the performance, efficiency, and cost of operating the drive. Power consumption of an SSD is usually measured in watts, and the lower the watts, the more energy efficient the drive is.
The power consumption of the VK003840GWCFK HPE 3.84TB SATA SSD is specified at 4.5 watts during read and write operations, and 1.7 watts in idle mode. This low power consumption is achieved by using advanced NAND flash memory technology and efficient power management features.
It is important to note that the power consumption of the VK003840GWCFK HPE 3.84TB SATA SSD will also depend on the system it is installed in, and the workloads it is being used for. In general, high performance SSDs will consume more power than standard drives, but the benefits of improved performance, speed, and reliability will offset the increased power consumption.
Endurance and Reliability
Endurance and reliability are critical factors for any solid state drive, especially for read-intensive workloads. The HPE 3.84TB SATA 6GBPS SC Read Intensive SFF 2.5inch solid state drive (VK003840GWCFK) offers exceptional endurance and reliability, ensuring a long lifespan and consistent performance over time.
Endurance refers to the total amount of data that can be written to the drive over its lifetime. The HPE 3.84TB SATA SSD has a high endurance rating, with a maximum endurance of 1,600 terabytes written (TBW). This means that the drive can handle a high amount of data writes before reaching its endurance limit.
Reliability is a measure of how well the drive performs and how long it can continue to perform at its expected level. The HPE 3.84TB SATA SSD is designed with advanced error correction and power-loss protection features, which help ensure reliable and consistent performance even in demanding environments. Additionally, the drive has been rigorously tested and validated to meet HPE’s high standards for quality and reliability.
Integration and Deployment
Integration and deployment of the HPE 3.84TB SATA 6GBPS SC Read Intensive SFF 2.5inch solid state drive (VK003840GWCFK) refers to the process of adding the SSD to an existing system or incorporating it into a new system setup. The integration process includes the following steps:
- Compatibility Check: Before integrating the SSD, it is important to ensure that the system is compatible with the drive and can support the SATA 6GBPS interface.
- Physical Installation: The HPE 3.84TB SATA SSD is a 2.5-inch form factor drive, which can be easily installed into most systems that support 2.5-inch drives.
- Connectivity: The drive should be connected to the SATA port on the motherboard and secured in place with screws.
- Power Connections: The SSD requires power to function, which is provided by the SATA power cable.
- Operating System Installation: Once the drive is installed and connected, the operating system should be installed on the drive.
- Configuration: The system may require some configuration settings to optimize the performance of the SSD. This may include enabling SATA 6GBPS interface, setting the drive as the primary boot device, and enabling AHCI mode.
The deployment process includes steps for initializing, formatting, and partitioning the drive, and installing any necessary drivers or firmware updates. Once the integration and deployment process is complete, the HPE 3.84TB SATA SSD can be used as a high-performance storage solution for read-intensive workloads.
Detail Description
- Manufacturer: Hewlett Packard Enterprise (HPE)
- MPN: VK003840GWCFK
- Option Part Number: 868830-B21
- Spare Part Number: 868932-001
- Assembly Number: 866615-005
- SKU: VK003840GWCFK
- Type: Hot-Swap Solid State Drive
- SSD Type: SATA-6GBPS
Technical Information
- Capacity: 3.84 TB
- Form Factor: 2.5 inch SFF
- Plug Type: Hot Pluggable
- Carrier Type: Smart Carrier (SC)
- Workload Type: Read Intensive
- Features: Digitally Signed Firmware
- Bundled with: HPE SmartDrive Carrier
Performance
- Lifetime Writes: 6512
- Endurance DWPD (Drive Writes Per Day): 0.8
- Drive Transfer Rate (External): 6 GB/Sec
- Internal Data Rate (Read): 530 MBPS
- Internal Data Rate (Write): 490 MBPS
- Random Read IOPS (4KiB, Q=16): 63500
- Max Random Read IOPS (4KiB): 75500@Q32
- Random Write IOPS (4KiB, Q=16): 27500
- Max Random Write IOPS (4KiB): 27500@Q1
- Random Read Latency: 120
- Random Write Latency: 36
Power
- Power Consumption: 9 Watt
Miscellaneous
- Compliant Standards: WEEE
Environmental Parameters
- Min Operating Temperature: 32 °F
- Max Operating Temperature: 140 °F
Dimensions & Weight
- Height: 0.63 inch
- Width: 3.10 inch
- Depth: 5.45 inch
- Weight: 1.50 lbs
Compatibility Information
- HPE ProLiant BL Series: BL460c Gen10 (2.5 inch)
- HPE ProLiant DL Series: DL360 Gen10 (2.5 inch), DL360 Gen10 Base (2.5 inch), DL360 Gen10 Entry (2.5 inch), DL360 Gen10 High Performance (2.5 inch), DL360 Gen10 Low (2.5 inch), DL360 Gen10 Performance (2.5 inch), DL360 Gen10 Solution (2.5 inch), DL388 Gen9 (2.5 inch), DL388 Gen9 Base (2.5 inch), DL560 Gen10 (2.5 inch), DL560 Gen10 Base (2.5 inch), DL560 Gen10 Entry (2.5 inch), DL560 Gen10 Performance (2.5 inch), DL580 Gen10 (2.5 inch), DL580 Gen10 Base (2.5 inch), DL580 Gen10 Entry (2.5 inch), DL580 Gen10 Performance (2.5 inch)
- HPE ProLiant ML Series: ML350 Gen10 (2.5 inch), ML350 Gen10 Base (2.5 inch), ML350 Gen10 Entry (2.5 inch), ML350 Gen10 Performance (2.5 inch), ML350 Gen10 Solution (2.5 inch), ML350 Gen10 Sub-Entry (2.5 inch)
- HPE ProLiant XL Series: XL190r Gen9 (2.5 inch)
- HPE StoreEasy 1850
- HPE Synergy 480 Gen10 Base Compute Module (2.5 inch), 480 Gen10 Entry Compute Module (2.5 inch), 480 Gen10 Performance Compute Module (2.5 inch), 480 Gen10 Premium Backplane Compute Module (2.5 inch), 480 Gen10 Standard BackPlane Compute Module (2.5 inch), 480 Gen10 w/o Drives Compute Module (2.5 inch), 660 Gen10 Base Compute Module (2.5 inch), 660 Gen10 Compute Module (2.5 inch), 660 Gen10 Entry Compute Module (2.5 inch), 660 Gen10 Performance Compute Module (2.5 inch), 660 Gen10 Premium Compute Module (2.5 inch)
