Description
Smart Memory Functionality and Benefits
The HMA84GR7JJR4N-VK is a 32GB DDR4 SDRAM memory module from Hynix with a speed of 2666 MHz and latency of CL19.
The “Smart Memory” functionality refers to the use of advanced memory technologies and features that provide enhanced performance, stability, and reliability.
Benefits of the Smart Memory Functionality include:
- Improved system performance: The higher speed and lower latency of the memory can result in faster system responsiveness and better overall performance.
- ECC (Error Correction Code) support: ECC helps to detect and correct errors in data storage, ensuring data integrity and reducing the risk of data corruption.
- Dual rank support: This allows for higher memory density and improved performance in multi-DIMM configurations.
- Registered design: The registered design allows for a higher number of memory modules to be used in a system without sacrificing stability.
Energy Efficiency and Power Consumption
The HMA84GR7JJR4N-VK is a DDR4 SDRAM memory module with a voltage of 1.2V, which is lower compared to previous DDR generations (DDR3, for example, operates at 1.5V). This lower voltage results in lower power consumption, which can have a significant impact on energy efficiency and the overall power budget of a system.
In addition, DDR4 also includes several power management features, such as Self-Refresh and Deep Power Down modes, that allow the memory to consume less power when the system is idle or in low-power states. These features contribute to the overall energy efficiency of the system and can help to reduce operating costs.
The HMA84GR7JJR4N-VK’s low voltage and power management features make it a more energy-efficient memory solution compared to previous DDR generations, which can result in lower operating costs and a more sustainable computing environment.
Installation and Setup Instructions
Installing the HMA84GR7JJR4N-VK 32GB DDR4 memory module involves the following steps:
- Determine compatibility: Make sure the memory module is compatible with your system’s motherboard and processor. Check the specifications of your system to ensure the module is compatible in terms of speed, voltage, and memory type (DDR4).
- Power off the system: Turn off the power to the system and unplug the power cord to ensure safety while installing the memory.
- Open the case: Locate and remove the screws that hold the side panel in place, then gently remove the panel to access the interior of the system.
- Locate the memory slots: On the motherboard, locate the memory slots (usually colored blue or black). DDR4 memory slots have 288 pins, which is a different number of pins compared to previous DDR generations.
- Install the module: Align the notches on the module with the keys in the slot and gently press down on the module until it clicks into place. Make sure the module is firmly seated and that the clips on either side of the slot are securely latched.
- Replace the side panel: Replace the side panel and secure it with the screws that were removed earlier.
- Power on the system: Plug the power cord back in and turn on the power to the system. The system should automatically detect the new memory and configure it accordingly.
- Check the memory configuration: Once the system has booted, check the system’s memory configuration to verify that the module has been recognized and is functioning properly. This can typically be done through the system’s BIOS or by using a system information utility.
General Information
- Manufacturer: Sk Hynix
- Manufacturer Part Number : HMA84GR7JJR4N-VK
- Product Name: 32GB DDR4 Sdram Memory Module
Technical Information
- Storage Capacity : 32GB
- Memory Technology : DDR4 Sdram
- Number Of Modules : 1 X 32GB
- Bus Speed: 2666mhz DDR4-21300/PC4-2666v
- Data Integrity Check : Ecc
- Signal Processing : Registered
- Cas Latency Timings : Cl19
- Rank Features : 2RX4